PCI Serial

The MM-6171 XMC is a Buffer Memory XMC with support for Serial RapidIO x4 or PCI Express x8. Equipped with 2-4 GB of DDR2 SDRAM, the card provides high-speed buffering capabilities for DSP systems. The XMCs have a variety of uses, such as high-speed temporary storage, expanded system memory, interleaving, or for use with data aggregation and wareho ...more

The MPE730 is a VPX-REDI quad-core processing board with dual mezzanine sites and on-board Serial RapidIO fabric connectivity. Utilizing dual Freescale Power Architecture MPC8641Ds, the four cores provide significant processing power while still meeting rugged, extended temperature convection and conduction-cooled requirements. Combining this proce ...more

The PMC451 is a PMC FPGA-based 16/24 channel serial card with front and rear I/O. The standard configuration consists of a PCI-core and sixteen (UART16) or twentyfour (UART24) 16C550-uart compatible cores. The PMC451 has a software configurable physical interface. This card offers the user the possibility to create a combination of RS232 and RS ...more

The PMC450 is a FPGA-based 8 channel RS422 serial card with front and rear I/O. The standard configuration consists of a PCI-core and eight 16C550-uart compatible cores. With the 32 onboard RS422 transceivers 8 serial RS422 channels (Rx, Tx, RTS and CTS) are created. The PMC450 features a 68-pin high dense connector at the front for the connect ...more

The BERT-50 PCI board level Bit Error Rate Testers handle a maximum synchronous serial bit rate of 50 Mbps per channel. The BERT-50 board level products are available in single or 2 channel versions and include: PCI bus BERT. Application software. Device drivers for Windows 2000, and Windows XP* User's Manual  ...more

The Single Channel Telemetry Interface 800 which occupies a single PCI slot, is intended for applications that require the input and output of a single serial or parallel telemetry data stream on a PCI interface of data rates up to 800 Mbps (serial) or 100 MB/sec (parallel). ...more

The PCI2403 provides an intelligent interface card for two serial, dual redundant MIL-STD-1553 data buses and the PCI bus. The card supports 1553A, 1553B, McAir and STANAG 3838 variants on a single card. The PCI2403 provides concurrent Bus Controller (BC) and up to 31 Remote Terminals (RT) with Bus Monitor (BM). An additional stand-alone Chrono ...more

The Two Channel Telemetry Interface 800-2 which occupies a single PCI slot, is intended for applications that require the input or output of two serial or parallel telemetry data streams on a PCI interface of data rates up to 800 Mbps(serial) or 100 MB/sec (parallel). ...more

The PMC451 is a PMC FPGA-based 16/24 channel serial card with front and rear I/O. The standard configuration consists of a PCI-core and sixteen (UART16) or twentyfour (UART24) 16C550-uart compatible cores. The PMC451 has a software configurable physical interface. This card offers the user the possibility to create a combination of RS232 and RS ...more

The Single Channel Telemetry Interface 400 which occupies a single PCI slot, is intended for applications that require the input or output of a single serial or parallel telemetry data stream on a PCI interface of data rates up to 400 Mbps (serial) or 50 MB/sec (parallel). ...more

The BERT-800 PCI board level Bit Error Rate Testers handle a maximum bit rate of 800 Mbps per serial channel or 100 MB/sec per parallel channel. The BERT-800 board level products include: PCI bus BERT. Application software. Device drivers for Windows 2000, and Windows XP* User's Manual  ...more

The two channel Telemetry Interface 100-2 which occupies a single PCI or PCIe slot, is intended for applications that require the input and output of two synchronous serial telemetry data streams on a PCI interface of data rates up to 100 Mbps per channel. ...more

The BERT-400 PCI board level Bit Error Rate Testers handle a maximum bit rate of 400 Mbps per serial channel or 50 MB/sec per parallel channel. The BERT-400 board level products include: BERT card for PCI bus. Application software. Device drivers for Windows 2000, Windows Server 2003, and Windows XP* User's Manual  ...more

The Two Channel Telemetry Interface 400-2 which occupies a single PCI slot, is intended for applications that require the input or output of two serial or parallel telemetry data streams on a PCI interface of data rates up to 400 Mbps (serial) or 50 MB/sec (parallel). ...more

The IEEE 1394 is a serial bus technology used to connect external peripheral devices to the PC. The VXI-1394 interface kit links any PCI-based computer directly to the VXIbus using the IEEE 1394 or "FireWire" high-speed serial bus. ...more

The PMC450 is a FPGA-based 8 channel RS422 serial card with front and rear I/O. The standard configuration consists of a PCI-core and eight 16C550-uart compatible cores. With the 32 onboard RS422 transceivers 8 serial RS422 channels (Rx, Tx, RTS and CTS) are created. The PMC450 features a 68-pin high dense connector at the front for the connect ...more

The PCI2403 provides an intelligent interface card for two serial, dual redundant MIL-STD-1553 data buses and the PCI bus. The card supports 1553A, 1553B, McAir and STANAG 3838 variants on a single card. The PCI2403 provides concurrent Bus Controller (BC) and up to 31 Remote Terminals (RT) with Bus Monitor (BM). An additional stand-alone Chrono ...more

The Serial RapidIO-to-PCIe Intelligent Bridge IP Core is architected for applications requiring high-bandwidth bridging between PCI Express® (PCIe) devices and serial RapidIO® digital signal processors (DSPs), processors, and switch fabric. The IP connects a serial RapidIO port operating up to 3.125 GHz to an 8x PCI Express port operating at 2 ...more

The Telemetry Interface 50 which occupies a single PCI or PCIe slot, is intended for applications that require the input and output of a single synchronous serial telemetry data stream on a PCI interface of data rates up to 50 Mbps. ...more

The BERT-100 PCI board level Bit Error Rate Testers handle a maximum synchronous serial bit rate of 100 Mbps per channel. The BERT-100 board level products are available in single or 2 channel versions and include: PCI bus BERT. Application software. Device drivers for Windows 2000, and Windows XP* User's Manual  ...more

The Telemetry Interface 100 which occupies a single PCI or PCIe slot, is intended for applications that require the input and output of a single synchronous serial telemetry data stream on a PCI interface of data rates up to 100 Mbps. ...more

The two channel Telemetry Interface 50-2 which occupies a single PCI or PCIe slot, is intended for applications that require the input and output of two synchronous serial telemetry data streams on a PCI interface of data rates up to 50 Mbps per channel. ...more

The PCIe-HPDI32A-ASYNC is a full-duplex RS-422/485 serial I/O board. Each channel can operate up to 5M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an F ...more

These are eight-port, asynchronous, serial communication cards designed for use on the PCI bus. They support RS-422 or RS-485 communications. These cards offer the best combination of high-density and high-speed communications in a low profile form factor. ...more

The explosive adoption of high speed serial data links and the proliferation of multi-lane SerDes channels have created a new set of challenges for semiconductor design and test teams. These multi-Gbps low voltage differential signaling (LVDS) channels are proliferating in many standard forms, including PCI express, Gbit Ethernet, Serial ATA, ...more