Showing results: 16 - 30 of 105 items found.
-
PCIe-C429X -
Avionics Interface Technologies
16, 32, or 64 ARINC 429 Channels (up to 32 Tx & 32 Rx) - Programmable Tx channel output amplitude - Programmable High/Low Speed Operation - Eight (8) Discrete I/O (Four (4) inputs, and four (4) outputs) - Concurrent operation of all Tx/Rx Channels at high data rates - Full error injection and detection - Data capture filtering, 100% bus recording, and physical bus replay - Rate-oriented Label Transmission - Label Selective Trigger for Capture/Filtering - IRIG-B time code encoder/decoder with free-wheeling mode - Application Interface supporting C/C++, C# and VB.NET Development - Device driver support: Windows, Linux, LabVIEW Real-Time (others on request) - Compatible with AIT’s Flight Simulyzer GUI Bus Analyzer Software
-
Teledyne LeCroy
The Summit Z3-16 Test Platform with SMBus Support allows the Summit Z3-16 to act as a host emulator, and provides a general purpose test backplane and interposer for testing Gen3, Gen2 or Gen1 hosts and devices. In addition, it supports the Summit Z3-16 with SMBus Support by providing SMBus tapping connectivity.
-
N5991PB6A -
Keysight Technologies
The N5991PB6A is the receiver test automation software for bit error ratio testers, allowing you to test and characterize PCI Express 6.0 ASICs
-
N5991PB5A -
Keysight Technologies
The N5991PB5A is the receiver test automation software for bit error ratio testers, allowing you to test and characterize PCI Express 5.0 ASICs
-
N5991PB4A -
Keysight Technologies
The N5991PB4A is the receiver test automation software for bit error ratio testers, allowing you to test and characterize PCI Express 4.0 ASICs.
-
N5991PU4A -
Keysight Technologies
The N5991PU4A is the receiver test automation software for bit error ratio testers, allowing you to test, debug and characterize PCI Express U.2 devices and hosts at 8 GT/s.
-
N5991PM4A -
Keysight Technologies
The N5991PM4A is the receiver test automation software for bit error ratio testers, allowing you to test, debug and characterize PCI Express M.2 devices and hosts at 8 GT/s.
-
AME1553-1 -
AIM GmbH
MIL-STD-1553 Test and Simulation PCI Express Mini Card with 1 Dual Redundant channel plus 2 discrete Input, 2 discrete Output channels.
-
-
PCIe-C664-V2 -
Avionics Interface Technologies
Supports IEEE 802.3 10/100/1000 Mbit/s Full-Duplex Ethernet links - Utilizes SFPs to support both copper and optical interfaces - Simulates multiple ARINC 664 End Systems - VL traffic shaping and input VL redundancy management - Supports up to 4K Output VLs and 4K Input VLs - Supports up to 16K Sampling & Queuing output message ports and up to 16K input Sampling & Queuing message ports - ARINC 653, UDP, IP protocols managed onboard - IRIG-B time code encoder/decoder - Automatic message sequencing & periodic data generated onboard - Error Injection including Runt Frames, Short IFG, and Invalid MAC FCSDevice driver support: Windows, Linux, LabVIEW Real-Time (others on request) - Compatible with AIT’s Flight Simulyzer GUI Bus Analyzer Software
-
GRL-PCIE3-BASE-RX -
Granite River Labs Inc.
GRL’s PCI Express®3.0 Base Specification Receiver Calibration and Test Automation Software for the Tektronix BERTScope™ BSA (GRL-PCIE3-BASE-RX) provides an automated, simple, and efficient way to test your PCIe 3.0 Receiver to the Base (ASIC) Specification.
-
Granite River Labs Inc.
PCI Express® 4.0 Receiver Test Automation Software Suite (GRL-PCIE4-RXA) provides an automated, simple and efficient way to test your 4.0 designs using the Anritsu MP1900A with any Tektronix and Keysight Real-Time Oscilloscope oscilloscope. The GRL-PCIE4-RXA Test Suite features two components that can be ordered separately or bundled together. GRL-PCIE4-BASE-RXA is used for testing your PCIe® 4.0 Receiver to the Base (ASIC) Specification, while GRL-PCIE4-CEM-RXA is used for testing end products to the PCIe® 4.0 CEM (Card Electro-Mechanical) Specification. GRL-PCIE4-RXA provides a simple user interface to automate complex PCIe testing. The software runs on Windows 7 or higher oscilloscope or any PC OS, and significantly reduces equipment calibration and test time. For Base Specification testing, GRL software uses the industry-standard Seasim statistical data eye simulator to establish the calibrated test channel DDJ. The final calibrated eye diagram uses both Seasim and SigTest software to arrive at the final stressed eye diagram. Receiver jitter tolerance and margin testing can then be performed on the device under test. For CEM Spec testing, GRL software uses VNA method for Channel measurement and SigTest for all other stressed eye impairments. Jitter Tolerance and Margin Testing is offered in both BASE and CEM software versions of the software, while The CEM version provides all the tests required by the PCIe® 4.0 CEM CTS. Transmitter testing is also available using GRL-PCIE34-TXP1 Software and Controller. If ordered with with GRL-PCIE4-RXA Receiver test software, all PCIe® 4.0 CTS CEM tests (Transmitter and Receiver) can be performed on the MP1900 and any vendor’s Real-Time Oscilloscope using GRL’s automation framework without the need for vendor specific software tools.
-
APE429-x -
AIM GmbH
ARINC429 Test and Simulation modules with 4, 8, 16 or 32 Software programmable Tx/Rx channels plus up to 8 Discrete I/O’s. The APE429-x is a functional replacement for the models API429-x/APX429-x.
-
ACE3910-3U-1 -
AIM GmbH
STANAG3910/EFEX Test and Simulation module for CPCIe/PXIe (3U) with 1 Dual Redundant HS/LS channel. Onboard Fibre Optic Front End (FOFE). Easily select between EFAbus and EFEX modes for Tranche II Eurofighter.
-
ACE3910-3U-1-EN -
AIM GmbH
Single Stream STANAG3910 Test and Simulation module – Rafale – for PXI Express/Compact PXI Express with 1 dual redundant HS/LS channel and onboard Electrical Front End (EFE).