Optical Amplifiers

The NPRT 2200 performs Noise Power Ratio measurements to determine the dynamic range of optical transmitters, amplifiers and other active devices used in HFC networks. It has an internal broadband noise source, selectable filters and a measuring receiver. ...more

The OFAC series of high performance, low noise and high output power amplifiers are specially designed for CATV network systems, where signal distortion must be minimized. ...more

Compact CCD Optical Sensor, Separate Amplifier ...more

Compact CCD Optical Color Sensor, Separate Amplifier ...more

The Benchtop Erbium-Doped Fiber Amplifier (EDFA) amplifies optical signals across the EDFA window (1528 to 1610 nm). Through optimization of amplifier gain, noise figure, and saturated output power, the EDFA will expand your test capabilities in systems, components or sub-assembly manufacturing as well as research and development (R&D) env ...more

Mini optical sensors / with separate Amplifier / through beam sensors. M3 x 0,5 mm x 8 mm; 800 mm sensing distance - infrared or red  ...more

Picosecond Pulse Labs Model 5882 40 Gb/s Broadband Amplifier is designed for driving electro-absorption modulators and for use in optical receivers. ...more

The JDSU Fused Coupler, PM Combiner enables the efficient combination of two orthogonally polarized sources of light at the same wavelength such that they are output through the same, single fiber output. In optical amplifiers this provides a doubling of pump power whilst ensuring pump redundancy should a pump failure occur. ...more

With optical data rates increasing at an unprecedented pace, guaranteeing optical signal integrity has never been more critical. That's why we developed the OE-2. This optical-to-electrical converter connects seamlessly with the Wavecrest SIA Family of Signal Integrity Analysis solutions, and eliminates the need for separate power meters, filte ...more

Mini optical sensors / Amplifier / with digital output / with teach in. 350Hz - 100% nominal sensing distance ...more

Mini optical sensors / Amplifier / with digital output / with teach in. 500Hz - 100% nominal sensing distance ...more

This hybrid device combines an input multi-mode 9xx nm pump with a 1550 nm single-mode signal and a double cladding fiber (DCF) output for high-power optical amplification applications. A single-stage isolator for a 1550 nm signal is integrated into the device to allow better performance and greater integration of the high-power erbium doped f ...more

The JDSU variable slope attenuator (VSA) equalizes uneven gain profiles inherent to the use of optical amplifiers. The VSA is Telcordia GR 1209 and 1221 compliant and uses hermetic sealing for increased resistance to environmental extremes. It is available in low contrast and high contrast variants, and offers excellent positive or negative sl ...more

JDSU 1480/1550+1590 nm filter wavelength division multiplexers (WDMs) use interference filter technology to separate or combine pump laser and optical signals.With wide bandwidth, low insertion, high isolation, and low temperature dependent loss, they are ideal for use in optical amplifier and CATV applications. ...more

Mini optical sensors / with separate Amplifier / through beam sensors. Ø 4 mm x 11 mm; 2 m sensing distance - infrared or red  ...more

The IQS-6100 Erbium-Doped Fiber Amplifier (EDFA) is part of the IQS-500 Intelligent Test System, EXFO?s unmatched modular-concept test unit. The addition of an optical amplifier offers considerable flexibility to a WDM active component test setup.  ...more

JDSU 1550/1590nm filter wavelength division multiplexers (WDMs) are specifically designed to multiplex or demultiplex C- and L-band optical signals in dual-band erbium doped fiber amplifier (EDFA) systems. ...more

Mini optical sensors / Amplifier / with digital output / with teach in. 5kHz - 30% nominal sensing distance  ...more

The LDC-3908 8-Channel Laser Diode Controller Laser Diode Controller is designed for simultaneous control of both laser current and temperature in a single mainframe for R&D or production test of optical amplifiers. Its high stability, low-noise current, and temperature controllers also makes it ideal for low-channel count burn-in systems. ...more

Newport's F-CIR Series Polarization Insensitive Circulators feature low insertion loss, high isolation, low Polarization Dependent Loss (PDL), and are the perfect solution for add/drop filters, erbium-doped fiber amplifiers (EDFA), dispersion compensation, bi-directional communication, and optical R & D. Available with or without fiber pig ...more

The EDR 51xx Series incorporates a 75 μm InGaAs PIN photodetector coupled with a low cost BiCMOS transimpedance amplifier (TIA) designed to operate at 155 Mb/s (EDR 512x) or 622 Mb/s (EDR 515x). The PIN transduces optical power into current with high efficiency. ...more

Mini optical sensors / with separate Amplifier / retro reflective. 9 mm x 17 mm x 23 mm; 5 m sensing distance - red ...more

Picosecond Pulse Labs Model 5881 40Gb/s Broadband Amplifier is intended for use in optical receivers or for driving electro-absorption modulators. It is extremely broadband, covering over 6 decades from 25 kHz to 43 GHz. ...more

In addition to our Specialty EDFA systems, Calmar Optcom is now offering high power erbium-doped fiber amplifiers (AMP-ST) in response to industrial and R&D applications. AMP-ST can provide up to 37dBm saturated optical power. It has RS232 and GPIB communication interfaces. ...more

Mini optical sensors / with separate Amplifier / through beam sensors. Ø 2 mm x 8 mm; 500 mm sensing distance - red - microSPOT LED ...more