J6840 - Network Performance Tester The Network Analyzer - Wireline Protocol Test (J6840) is a wireline software application for full 7-layer protocol analysis and troubleshooting of LANs, WANs and ATM networks, delivering statistics, decodes, expert analysis, protocol vitals, connection stats, & extensive VoIP analysis.

Ethertest - Ethernet Protocol Analyzer & Network Sniffer Ethertest turns any network-ready Windows PC into an Ethernet analyzer that is optimal for both traditional enterprise LAN troubleshooting applications, and for the growing number of situations in which data communication professionals must support both Ethernet and serial applications or networks.

SuperLink network Tester - ISDN Analyzer According to ITU-T and the latest R&D standard of ISDN in China, the ISDN tester is a high-performance analyzer for ISDN users. Provide overall monitoring analysis for ISDN protocol including direct protocol test of ISDN and test for interface V5.1/V5.2 on ISDN.

fcXplorer - Fibre Channel Simulator & Analyzer Test Software fcXplorer, AIT's Fibre Channel Simulator and Analyzer Test Software provides an intuitive Graphical User Interface (GUI) for AIT's Fibre Channel Simulyzer™ interface modules. fcXplorer troubleshoots, optimizes, plans and configures Fibre Channel traffic loading. Low- and High-level protocol analysis features provide capture, filter, time stamp and interpretation of Fibre Channel traffic and generation of advanced statistics. fcXplorer can alert engineers to potential performance and configuration problems allowing users to quickly identify and remedy any anomalous network condition.

CCTV-25TEST - Multifunctional tester CCTV-25TEST combines the most important testers in one compact housing: LCD monitor with a diagonal screen size: 6.4cm (2.5") PTZ controller for testing high-speed dome cameras (PELCO P, PELCO D and other protocols) PTZ protocol analyser for displaying data sent via an RS-485 interface Cable tester for network cables RS-485 polarity tester

GF4600-check - IEC61850 protocol analyzer IEC 61850 Protocol Analyzer
> IEC 61850 Client Simulator
> IEC 61850 Server Simulator
> IEC 61850 GOOSE Simulator
> IEC 61850 SCL Checker
> IEC 61850 SCL Multi IED Simulator
> IEC 61850 MU Test
> IEC 61850 IED Test
> IEC 61850 Double Network Redundancy Test

LE-580FX - LAN Packet Tester The LE-580FX is a LAN analyzer that connects to a PC's USB2.0 port. In TAP mode, you can capture full duplex data on 10/ 100Base-TX and transmit to the PC at 480Mbps via the USB2.0 interface. In PG mode, you can generate test packets at up to 100Mbps line rate.

Use LE-580FX for :
Checking LAN protocols and data in the test devices.
Checking and analyzing traffic.
Providing statistical information, such as error rate etc.
Generate test packets for network test.
Measuring QoS, such as latency etc.
Studying network communication protocols.

AirMagnet WiFi Analyzer The only integrated network analyzer that gives you enterprise-wide vision. Complete network vision in seconds. All the network tools you need to see all seven layers of the network. Combines protocol analysis, active discovery, SNMP device analysis, and RMON2 traffic analysis into a mobile solution. See key enterprise data from multiple advanced network tests into an information-rich, easy-to-understand front page.

Investigator AFDX - Protocol Analyzer Interface, Analysis and Test Support Investigator™ AFDX Protocol Analyzer supports network interfaces capable of full-line rate, multi channel and multiple protocol testing. Hardware supports analysis, traffic generation, statistics, impairment test, and BERT for both copper and optical interface connections. State-of-the-art FPGA technology is leveraged to facilitate flexibility and protect capital investments, while providing continued capabilities for development and support.

Ethernet ComProbe® - Portable, Non-Intrusive, Aggregator Ethernet Tap Frontline Test Equipment is pleased to announce the release of a compact, portable, aggregating Ethernet network tap that interfaces to the PC via USB. This new device, the Ethernet ComProbe, is non-intrusive, passive and captures bi-directional Ethernet data. The Ethernet ComProbe is compatible with NetDecoder™ and Ethertest™ software protocol analyzers. The Ethernet ComProbe is also compatible with the free, open-source Wireshark protocol analyzer.

Investigator Ethernet Protocol Analyzer for Ethernet, iSCSI, IP, and FCoE Investigator™ Protocol Analyzer for Ethernet, iSCSI, IP and FCoE Protocols supports network interfaces capable of full-line rate, multi channel and multiple protocol testing. Hardware supports analysis, traffic generation, statistics, impairment test, and BERT for both copper and optical interface connections.

UMTS - Protocol Analyzer GL's UMTS analyzer is capable of capturing, decoding and performing various test measurements across various interfaces i.e. Iub, Iur, IuCs and IuPs interfaces of the UMTS network. In addition, it supports ATM as the transport layer. It helps in fault diagnosis and troubleshooting of UMTS network. Multiple instances of UMTS Analyzer can run simultaneously capturing data (real time and off-line) on several T1/E1 lines. The analyzer is also capable of capturing & reassembling frames that were transmitted with Inverse Multiplexing. IMA combines up to 8 T1/ E1 links to form a single high-speed connection with flexible bandwidth options.

Serialtest® - Asynchronous RS-232/422/485 Serial Protocol Analyzer and Packet Sniffer Serialtest Async is a PC-based analyzer for passively monitoring or actively testing serial asynchronous (async) communication circuits and networked equipment, at speeds up to 921.6 Kbps. The product offers an economical solution for debugging, testing, and troubleshooting equipment, circuits and software applications on serial data communication networks. Typical test application areas include utility meter reading, railroad signal and switch monitoring, PC-based control, lottery and gaming, credit authorization, and the Internet.

TLP-3C - Transmission Analyzer The 2M Transmission Analyzer TLP-3C is a multi-functional and full- featured digital transmission system test device, designed for the installation test, engineering check and acceptance, daily maintenance of digital networks, mainly performing channel test, alarm analysis, fault finding and signalling analysis. In addition, this instrument further provides various protocol converters with one-way and bi-directional bit error test function. These capabilities make it ideal for field use.

CA6038 - 2M Transmission Analyzer CA6038 is a multi-functional and full featured digital transmission system test device, designed for the installation test, engineering check and acceptance, daily maintenance of digital networks, mainly performing channel test, alarm analysis, fault finding and signalling analysis. In addition this instrument further provides various protocol converters with one-way and bi-direction bit error test function. These capabilities make it ideal for field use.

ST-2135 - E1 Analyzer ST-2135 E1/Datacom Transmission Analyzer is one multi-functional and full- featured digital transmission system test device, designed for the installation test, engineering check and acceptance, daily maintenance of digital networks, mainly performing channel test, alarm analysis, fault finding and signalling analysis. In addition, this instrument further provides various protocol converters with one-way and bi-directional bit error test function. These capabilities make it ideal for field use.

ST Handheld Signaling Protocol Analyzer Signaling Tester handheld signaling protocol analyzer is connected to the links by high resistance to monitor and analyze the signaling and not to affect the normal operation of the links. DS79 can simultaneously test multiple networks, multi-network segments, multi-time slots,

LTE (Long Term Evolution) - Protocol Analyzer GL's LTE analyzer is capable of capturing, decoding and performing various test measurements across various interfaces i.e. S1, S3, S4, S5 (or S8), S6a, S10, S11, S13 and X2 interfaces of the LTE network.

SIP - Conformance Analyzer SIP Conformance Analyzer is an advanced testing solution for SIP enabled products widely used in today's VoIP and 3G networks. Comprehensive tests, protocol simulation and analysis tools verify SIP compliance according to ETSI TS 102 027 / RFC 3261 ensuring high probability of interoperability.

FTS for NTCIP - Protocol Analyzer / Monitor FTS for NTCIP is a protocol analyzer jointly developed by Frontline Test Equipment, Inc. and Trevilon for monitoring and analyzing NTCIP data communication protocols associated with Intelligent Transportation Systems (ITS). It operates on both serial (RS-232/422/485/530) and Ethernet networks. Currently supported protocols include PMPP-232, PMPP-FSK, PPP-232, and Ethernet (NTCIP Subnet Level);

TUP/ISUP - Optimized Analyzer Support MTP, TUP, ISUP, TCAP, INAP and other protocol test;??good assistant for testing and maintenance of SS7?meanwhile effectively insure the connectivity of network.

Performer - Protocol Analyzer The Performer Protocol Analyzer, is a comprehensive high performance test solution for vendor R&D and QA labs, service provider QA labs and field service technicians. Providing protocol analyzer capabilities, it offers a range of interfaces and tools for troubleshooting and monitoring a wide range of technologies. It is an ideal tool for monitoring and troubleshooting performance of a wide range of networks at all seven layers. The Performer Protocol Analyzer is available in both portable and scalable rack-mount configurations.