Search Results for Network Test / Analyzers

  • OTP6800 - Scalable Network Test Platform OTP6800 is an advanced, modular and flexible platform build for network experts. It accommodates four/eight field-interchangeable modules ranging from OTDRs and loss testers to SDH and Ethernet analyzers, OTP6800 offers network experts an all-in-one test set for FTTx, access and metro network’s installing, monitoring and troubleshooting.
    OPWILL Technologies
  • OTP6200 - Intelligent Network Test Platform OTP6200 is a smaller, lighter platform built for network experts. It accommodates two field-interchangeable modules ranging from OTDRs and loss testers to SDH and Ethernet analyzers. OTP6200 is the ideal test set for FTTx, metro and access network installing, monitoring and troubleshooting.
    OPWILL Technologies
  • CMA 5000a - Multi-Layer Network Test and Measurement Platform est Gigabit Ethernet, DWDM, SONET, OTDR, ORL, PMD, and CD all with the same easy-to-use multi-layer test platform.

    * EXtended Transport Analysis (XTA) Application
    * Universal Transport Analyzer (UTA) Application
    * Gigabit Ethernet Application
    * Optical Time Domain Reflectometer (OTDR) Application
    * Polarization Mode Dispersion (PMD) Application
    * Chromatic Dispersion (CD) Application
    * Optical Spectrum Analyzer (OSA) Application
    Anritsu
  • PSYS200 - Network Analyzer Performance Test System A.Frequency Accuracy Test B. Harmonics Test C. Non-Harmonic Spurious Test D. Phase Noise Test E. Sourse Level Accuracy Test F. Sourse Power Lincarity Test G. Receiver Noise Level Test H. Absolute Amplitude Accuracy Test
    Protronix Instrument
  • OBZOR-304/1 - Network Analyzer (2 test ports, 300 kHz to 3.2 GHz) OBZOR-304/1 is an S-parameter network analyzer designed for operation with external PC. This analyzer is an excellent low cost solution for performing the full range of magnitude and phase measurements over the frequency from 300 kHz to 3.2 GHz. OBZOR-304/1 provides a wide variety of analysis capabilities in frequency and time domains as well as frequency offset mode feature.
    Planar
  • Test cable kit for Vector Network Analyzers The flexible and Rosenberger reinforced sheath test cable has outstanding phase and amplitude stability. The cables are available as sets containing two cables with 60 cm standard length each. The range is optimized for frequencies up to 26.5 GHz, 40 GHz or 50 GHz. Test cable sets are supplied in high-quality wooden boxes.
    Rosenberger Hochfrequenztechnik
  • OBZOR-804/1 and OBZOR-808/1 - Network Analyzer (2 and 4 test ports, 300 kHz to 8.0 GHz) OBZOR-804/1 and OBZOR-808/1 are S-parameter network analyzers designed for operation with external PC. These analyzers are an excellent low cost solution for performing the full range of magnitude and phase measurements over the frequency from 300 kHz to 8.0 GHz. OBZOR-804/1 and OBZOR-808/1 provide a wide variety of analysis capabilities in frequency and time domains as well as frequency offset mode feature.
    Planar
  • LANEXPERT - Network Analyzer The LANEXPERT™ Network Analyzer is an essential tool for installing, monitoring, maintaining, upgrading or troubleshooting any network. The LANEXPERT™ utilizes a color touch screen interface to access one of the most complete suites of test and analysis functions available in a portable test tool.
    Psiber Data Systems
  • CN-100 - Network Analyzers CN-100 network analyzers offer an extremely powerful yet cost effective solution for today's complex networking requirements. Test Ethernet or ATM networks with the multi-port CN-100 portable or rack mount chassis which provide a standard platform that is easy to use, reducing training time and the expense of multiple testers.
    Compass Networks
  • PROPOWER - PLC network evaluation New PROPOWER range is made up of two basic elements: a PLC Spectrum Analyser and a PLC test signal Generator. All instruments have been designed for field use and combined use allow to test the network response to PLC test signals.
    PROMAX Electronica
  • J6840 - Network Performance Tester The Network Analyzer - Wireline Protocol Test (J6840) is a wireline software application for full 7-layer protocol analysis and troubleshooting of LANs, WANs and ATM networks, delivering statistics, decodes, expert analysis, protocol vitals, connection stats, & extensive VoIP analysis.
    JDSU
  • N5250C - PNA Millimeter-Wave Network Analyzer The N5250c PNA Series vector network analyzer system provides performance, connectivity, and flexibility in millimeter-wave component design and test. 
    Agilent Technologies
  • UTRAN - Network and Service Analyzer ?Automatic UTRAN topology discovery? provides a graphical map of the network reducing the overhead time needed to understand the configuration of the environment under test. 
    Tektronix
  • 99-0591 - Voice Network Analyzer The VNA-70A Voice Network Analyzer is a smart DVOM, loop tester and baby TMS with 8 vital test functions, perfect for troubleshooting subscriber loop & premise equipment.
    Metro Tel
  • E8357A - RF Vector Network Analyzer The E8357A Vector Network Analyzer is a member of the PNA Series network analyzer platform and provides the combination of speed and precision for the demanding needs of today's component test requirements. The PNA Series meets this testing challenge by providing the right combination of fast sweep speeds, wide dynamic range, low trace noise and flexible connectivity. The E8357A provides TRL/LRM calibration (four-receiver enabled) for in-fixture and on-wafer devices, standard bias-tees for active devices and standard direct receiver access for extended dynamic range. Powerful automation and self-help tools make the instrument well suited for both R&D and manufacturing. The PNA Series features sixteen independent measurement channels, built-in hard drive and supplied mouse.
    National Test Equipment
  • 1826 NA - Electrical Network Analyzer Loop Impedance Range L - E , L - N: 0.03-2000 Ohm (Software Ctrl). Test Currents In Each Loop : 11.76A at 230V/50Hz. Voltage Measurement L-N, L-E : 50 to 280V AC (Sine). Earth wire / path Return Resistance : 0.01-2000 Ohm (Software Ctrl).
    Standard Electric
  • AV3629 - Integrated Vector Network Analyzer It is the new generation network analyzer of the 41st Institute of CETC,on the basis of years of experience in the design of test and measurement instruments. It is designed to provide fast and accurate microwave measurement. With its friendly user interface, it is suitable for production line, service workshop, educational training and R&D.
    CETC
  • NM500 - LF Large-signal Network Analyzer The NM500 low-frequency large-signal network analyser (LSNA) is a combination of sensing modules and test set with integrated low-frequency bias tees, aimed at the accurate characterisation of the low-frequency voltage and current in time- and frequency-domain, possibly in a non-50 Ohm environment.
    NMDG NV
  • LA19-13-02 - Vector Network Analyser The LA19-13-02 is a PC-driven Vector Network Analyser suitable for measuring a wide range of devices from 3 MHz to 3 GHz with 100 Hz resolution. Its full s-parameter test set includes bias-Ts for biasing active devices. It is housed in a small lightweight package making it very portable.
    LA Techniques Ltd
  • N1958B - PNA-X Microwave Network Analyzer The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
    Agilent Technologies
  • N5242A - PNA-X Microwave Network Analyzer The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
    Agilent Technologies
  • N5244A - PNA-X Microwave Network Analyzer The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches
    Agilent Technologies
  • N5245A - PNA-X Microwave Network Analyzer The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
    Agilent Technologies
  • ZVx - Vector Network Analyzer Family The family comprises the five Vector Network Analyzers ZVRL, ZVRE and ZVR as well as ZVCE and ZVC which extend the frequency range to 8 GHz. All models are compact instruments with integrated generator, test set and receiver, each tailored to a different field of application. All analyzers can be subsequently upgraded to the higher-class models.
    Rohde & Schwarz GmbH

Results 1 - 24 of 105

Search Filters

  • Analyzers x

Manufacturers

View All (67)Hide List

Features