Network Simulators

The PacketStorm2600E IP network emulator provides wan emulation and network simulation. The PacketStorm2600E emulates any network condition in a repeatable and controllable lab setting. To re-create any network condition, the emulator can impair IP and non-IP traffic, provide dynamic, time-varying impairments, and use a fully independent and f ...more

PacketStorm Communications has a full family of IP network emulators and network recording devices. Typical uses include WAN emulation and network simulation for Enterprises, network devices, and software applications. The family of IP network emulators ranges from the Tornado software to the 40 Gbps PacketStorm4XG. All of the hardware IP netw ...more

The Hurricane II IP network emulator provides wan emulation and network simulation. The Hurricane II emulates any network condition in a repeatable and controllable lab setting. To re-create any network condition, the emulator can impair IP and non-IP traffic, provide dynamic, time-varying impairments, and use a fully independent and flexible ...more

The Tornado WAN emulation software transforms a PC into a wide area network. More and more applications are becoming web based and prone to the effects of the WAN. With Tornado, IT network professionals are able to perform pre-deployment testing for applications such as: ERP, storage, VoIP, video conferencing, ecommerce, datacenter consolidati ...more

Anue GEM Advanced Ethernet Network Simulators are ideal for testing 10/100/Gigabit Ethernet or IP based networking solutions in a lab environment. Ethernet Network Simulators can reproduce the delay and impairments experienced by Ethernet signals across MANs and WANs regardless of the underlying transport mechanism. ...more

NetDisturb is an IP network emulator - simulator software that can generate impairments (latency, delay, jitter, limited bandwidth and lost packets) over IP networks. It works on 10/100 and 1 gigabit platforms. Download free trial. ...more

Anue XGEM Advance Ethernet Network Simulators are ideal for testing 10 Gigabit Ethernet or IP based networking solutions in a lab environment. Ethernet Network Simulators can reproduce the delay and impairments experienced by Ethernet signals across MANs and WANs regardless of the underlying transport mechanism. ...more

The PacketStorm4XG IP network emulator providesWAN emulation for multiple 1Gbps and 10Gbps ports. The PacketStorm4XG has over 64 million packets per second throughput. Up to four 10Gbps or thirty-two 1Gbps ports can be installed in one chassis. The PacketStorm4XG impairs IP and non-IP traffic. ...more

The PacketStorm1800E IP network emulator provides wan emulation and network simulation. The PacketStorm1800E emulates any network condition in a repeatable and controllable lab setting. To re-create any network condition, the emulator can impair IP and non-IP traffic, provide dynamic, time-varying impairments, and use a fully independent and f ...more

The Model 3540 is a two-channel DSP-based instrument that can be configured as a Central Office (FXS) on one or both channels, and/or as Telephony Equipment (FXO) on one or both channels. Central Office Simulation allows the Model 3540 to generate DC Voltage plus a wide range of country-specific SMS, Caller ID, FSK, Ringing, Call Progress, Noise, ...more

The Fibre Optic Network Simulator or FONS provides a technician with a true optical fibre path of different lengths which can be tapped to add or reduce the effects of attenuation and time delay to equipment under test. The FONS is simple to use and is available in standard 25, 50 and 100 Km. total lengths. The lengths can then b ...more

Telecommunication networks are exposed to lightning events. Therefore telecommunication equipment being connected to the outside world need to have appropriate protection to show an acceptable immunity to surge transients in order not to fail in case of lightning events. Telecom Surge Simulators of the TSS 500 series are used to proof the immunity ...more

Spirent Communications’ SX Data Link Simulators provides very realistic delay and error characteristics of actual network conditions, allowing engineers to stress test new equipment and network applications under repeatable and controllable conditions. Utilizing dual-channel, full-duplex operation, these simulators provide bi-directional ...more

Spirent Communications’ Avalanche product line simulates real-world user behavior, network conditions, and large web and application infrastructures. Avalanche eliminates the need for expensive testing infrastructures by emulating the behavior of up to two million users in a single, compact device. With Spirent’s range of next generation testing so ...more

Telecommunication networks are exposed to lightning events. Therefore telecommunications equipment being connected to the outside world need to have appropriate protection to show an acceptable immunity to surge transients in order not to fail in case of lightning events. Telecom Surge Simulators of the TSS 500 series are used to proof the immunity ...more

The Fortissimo is an analog network load generator that simulates telephony subscribers placing calls into the network. The unit gives the user flexibility to serve a wide range of applications associated with switch and network testing. ...more

Telecommunication networks are exposed to lightning events. Therefore telecommunication equipment being connected to the outside world need to have appropriate protection to show an acceptable immunity to surge transients in order not to fail in case of lightning events. Telecom Surge Simulators of the TSS 500 series are used to proof the immunity ...more

Electronic and electrical equipment may be affected by voltage dips, short interruptions and voltage variations of the power supply. Dips and interruptions are caused by faults in the public supply network, in installations or by sudden large change of load. Testing to such phenomena is required to proof that electronic and electrical equipment do ...more

The OCS 500M6 includes test capabilities for ringwave up to 6kV (as per IEC 61000-4-12) and the damped oscillatory waves at 100kHz and 1MHz up to 2.5kV (as per IEC 61000-4-18). The Ringwave is a non-repetitive damped oscillatory transient occurring in low-voltage power, control and signal lines supplied by public and non-public networks. ...more

The Fortissimo is an analog network load generator that simulates telephony subscribers placing calls into the network. The unit gives the user flexibility to serve a wide range of applications associated with switch and network testing. ...more

High performance synchronous satellite link simulator providing delay, error conditions and test facilities - ideal for testing routers and multiplexers prior to network deployment. ...more

The UCS 200N Ultra-Compact Simulator for Automotive Transients unifies the capabilites of an EFT/Burst simualtor, a Micropulse simulator and the required coupling network into one box. The UCS 200N is equiped to meet all international and car manufacturer specifications from around the globe. ...more

Telecommunication networks are exposed to lightning events. Therefore telecommunications equipment being connected to the outside world need to have appropriate protection to show an acceptable immunity to surge transients in order not to fail in case of lightning events. Telecom Surge simulators of the TSS 500 series are used to proof the immunity ...more

The Fortissimo is a network load generator that simulates telephony subscribers placing calls into the network by connecting through the IP telephone set. The unit gives the user flexibility to serve a wide range of applications associated with switch and network testing. ...more

The PDS Clarinet test system is a very well respected and established solution for a wide range of protocol analysis, simulation and development applications. Physical interface pods are available for E1/T1, S/T-U and LAN (Ethernet 10/100 Mbit/S). The Clarinet system includes a Run-Time software license and Clarinet pod(s) supporting the relevant i ...more