Network Delay

Anue Path Delay Network Emulators are ideal for SONET and SDH VCAT testing in a lab environment. Path Delay network emulation allows you to create individual path-layer delays identical to those that occur during the transmission of SONET/SDH signals. Anue Path Layer Delay Network Emulation tools create individual path level delays identical t ...more

NetDisturb is an IP network emulator - simulator software that can generate impairments (latency, delay, jitter, limited bandwidth and lost packets) over IP networks. It works on 10/100 and 1 gigabit platforms. Download free trial. ...more

Anue CPRI Signal Delay Network Emulators simulate the impairments that can occur on a CPRI link. Like all Anue emulators it is supported by a flexible hardware platform that enables very accurate and highly repeatable testing and includes automation capabilities to increase testing efficiency. The CPRI Signal Delay Network Emulator can emulate ...more

Anue OTN Signal Delay Network Emulators provide WAN simulation for testing transport solutions in a lab environment. OTN Signal Delay Network Emulators can reproduce the delay and impairments experienced by Optical Transport Network signals across MANs and WANs. ...more

The Linktropy Mini emulates wide-area network bandwidth, delay, jitter, packet loss, and other link impairments at speeds of up to 100 Mbps. ...more

Call Analyzer is an easy to use analysis software package which automates problem isolation and optimization of SS7 based signaling networks. The revolutionary software tracks the message sequences of all calls across all interfaces and displays the results for each flow. Using this method each call can be analyzed to show where the transaction bro ...more

The Linktropy 4500 WAN Emulator combines unsurpassed precision with unbeatable prices. The Linktropy 4500 simulates wide-area network bandwidth, delay, jitter, packet loss, congestion, and other important link impairments at speeds of up to 155 Mbps. ...more

The Linktropy 10-G WAN Emulator brings the ease-of-use and cost-effective prices of the Linktropy product line to the emulation of high-speed links up to 10 Gbps. The Linktropy 10-G simulates wide-area network bandwidth, delay, jitter, packet loss, congestion, and other important link impairments to test the performance of applications in the lab. ...more

The Linktropy 7500 PRO WAN Emulator simulates wide-area network bandwidth, delay, jitter, packet loss, congestion, and other important link impairments at speeds of up to 1 Gbps per link. The Linktropy 7500 PRO can emulate up to 4 separate individual links simultaneously to an aggregate throughput of 4 Gbps, making it ideal for both multi-link ...more

The Fibre Optic Network Simulator or FONS provides a technician with a true optical fibre path of different lengths which can be tapped to add or reduce the effects of attenuation and time delay to equipment under test. The FONS is simple to use and is available in standard 25, 50 and 100 Km. total lengths. The lengths can then b ...more

The Linktropy 7500 WAN Emulator combines unsurpassed precision with unbeatable prices. The Linktropy 7500 simulates wide-area network bandwidth, delay, jitter, packet loss, congestion, and other important link impairments at speeds of up to 1 Gbps at full line rate. The compact 1U-sized appliance includes both copper and modular fiber/copper G ...more

The new Digital Speech Level Analyser II extends the performance of the earlier DSLA. It predicts a speech quality score and measures the characteristics of the speech channel. It generates a linguistically motivated artificial speech test signal and evaluates the resultant signal after it has been processed by any network or network element, even ...more

The Router Delay Simulator with long data delays(RDS-LDD) allows DCE to DTE connections at data rates up to 5Mbps while simulating network delays. The user selectable delays are for bi-directional data and range from 10 milliseconds(mS) to approximately 2560 mS, in 10 mS increments. The RDS-LDD allows users to test and pre-configure critical DTE eq ...more

The RDS-PLUS is a modular, network link error and delay simulator that provides a realistic simulation of physical network behavior with respect to time delays and bit errors. The RDS-PLUS supports a wide range of interface types and speeds, ranging from 1200bps to over 50Mbps. ...more

FaxLab automates testing for timing delays, dropped packets or other network anomalies that corrupt fax calls. You can create an end-to-end test system that plays both originator and answering party in a fax call using FaxLab and multiple ChannelTraps. This system identifies fax message degradation caused by the network transport, as well as f ...more

Connectivity Fault Management (CFM) as defined by the draft IEEE P802.1ag as well as the ITU-T Y.1731 standard, is a key functionality in the implementation of Ethernet Operations, Administration and Maintenance (E-OAM) capability in carrier networks.  With CFM, Service Providers gain end-to-end diagnostic capabilities essential for rapi ...more

For testing network transmission delays. The Router Delay Simulator (RDS) allows Router-to-Router connections at data rates up to 2.048Mbps while simulating network delays. The user selectable delays are for both data and control signals and range from 5 milliseconds(mS) to approximately 1250 mS, in 5 mS increments. The RDS allows users to test and ...more

For testing network transmission delays utilizing an external clock source. The Router Delay Simulator (RDS-ECO) allows Router-to-Router connections at data rates up to 5Mbps while simulating network delays. The user selectable delays are for both data and control signals and range from 5 milliseconds(mS) to approximately 1250 mS, in 5 mS increment ...more

The IPTV Test Option for the QuickTest 100 is ideal for the installation, maintenance and commissioning of IPTV services. The QuickTest 100 IPTV Test Option helps you quickly find service problems such as: Excessive Network Jitter. Packet Loss. Bandwidth Issues. Channel Change Delay. Missing Channels. Poor Quality of Service ...more

Network Analyzers R3765 and R3767 measure amplitude, phase and group delay. Thanks to high-speed signal processing, the analyzers can perform measurements at a high rate of 0.15 ms per test-point. Models have a TFT colour LCD allowing simultaneous display of up to four diagrams and eight traces. A programmable sweep function is provided in all ...more

Network Analyzers R3765 and R3767 measure amplitude, phase and group delay. Thanks to high-speed signal processing, the analyzers can perform measurements at a high rate of 0.15 ms per test-point. Models have a TFT colour LCD allowing simultaneous display of up to four diagrams and eight traces. A programmable sweep function is provided in all ...more

Can test the Transmission parameters ( the amplitude-frequency characteristics, insertion loss, amplifier gain, antenna gain, group delay, option for the antenna orientation chart measurement) and Reflection testing ( test standing wave, return loss, impedance, reflection phase, electric length, display the smith circuital chart function, opt permi ...more

AV3618 series microwave integrative vector network analyzer is a combination of synthesized swept frequency signal source, multi-channel amplitude and phase receiver and S parameter measurement device, with the compact structure, measurement frequency broadband, fast measurement speed and convenience to carry about. In one frequency sweep, you can ...more

The AV4941 Digital Microwave Communication Complex Tester combines multi-path fading simulator, link measurement personality, power meter, frequency counter, scalar network analyzer and signal source into a portable system. It is used in the measurement of multi-path fading specifications in mobile communications, including dynamic, static M-curves ...more

AV3634 Pulsed-RF Vector Network Analyzer is a new model of vector network analyzer developed by the Institute on the basis of AV3630 4-channel Amplitude and Phase Receiver. It can measure the amplitude, phase and group-delay of microwave networks under the CW state, as well as the transient response of microwave networks and components under the st ...more