Network Analyzers

Berkeley's Wi-Fi Power Analyzer is a low-cost, handheld sweeping receiver designed for 802.11(b,a,g) Wi-Fi frequency & power measurements. The receiver attaches directly to an Access Point, bridger or Network Interface Card via the included SMA antenna connection kit. The unit has a unique triggering capability to measure both 2.4 and 5 GHz frequen ...more

Yellowjacket® B/A/N/G is a wireless test receiver system that demodulates, sweeps, analyzes, and optimizes all popular 802.11 Wi-Fi network standards including 802.11b/g (2.4 GHz), 802.11n, 802.11h and even 802.11a (5 GHz). The calibrated receiver is a passive measurement device that is network independent so it remains "invisible" to any 802.11 Wi ...more

GL's UMTS analyzer is capable of capturing, decoding and performing various test measurements across various interfaces i.e. Iub, Iur, IuCs and IuPs interfaces of the UMTS network. In addition, it supports ATM as the transport layer. It helps in fault diagnosis and troubleshooting of UMTS network. Multiple instances of UMTS Analyzer can run si ...more

The ULTRA T1 (E1) Card transforms your PC into a sophisticated T1 or E1 analyzer. Prior versions of the Ultra T1(E1) Cards were designed for use in ISA slots, and the current Ultra T1(E1) cards are PCI. The newer PCI versions are available with either a single T1 (or E1) interface or with a dual T1 (or E1) interfaces. ...more

TRAU (Transcoder/Rate Adapter Unit) frames carry voice traffic and control information in a GSM network. The GSM/TRAU Analyzer when connected to monitor points (as depicted above) permits monitoring of TRAU frames in GSM networks. TRAU carries speech, data, O&M frames at full rate or half (8/16 kbps) rate. ...more

SS7 (Signaling System 7) separates the information required to set up and manage telephone calls in the Public Switched Telephone Network (PSTN) onto a separate packet switched network (Signaling Network). It uses Message Signal Units (MSUs), Link Status Signal Units (LSSUs), and Fill-In Signal Units (FISUs) as signal units. The main protocols ...more

The Route Analyzer provides OSPF analysis and recording capabilities for network management. It is designed to monitor traffic and provide fast diagnostics. The Route Analyzer includes intelligent error analysis and four settable alarm conditions ...more

Complete more installs faster and better using the Super Buddy satellite finder meter. Be "sure of your bird" with the positive ID feature or use the automatic scan to identify the unknown satellite. The Super Buddy's geo-sensitive "Field Guide" shows you just the birds visible to your install -- ALL of them, with their ind ...more

The ONA 600 Optical Network Analyser is a powerful and versatile tool for characterisation of optical fibers and networks. The system consists of a mainframe, plug-in modules for measurement of Chromatic Dispersion, Polarization Mode Dispersion and Spectral Attenuation with a full range of optical light sources. Designed to deliver superior pe ...more

BumbleBee-TABLET is a Windows XP tablet UMPC spectrum analyzer all-in-one system. The calibrated receiver measures a combo of popular wireless bands including Wi-Fi, Wi-MAX, ISM, Public Safety, Bluetooth and more. BumbleBee?-TABLET's interface offers a large 7" WVGA LCD touch-screen featuring Intel Pentium processor. In addition, the tabl ...more

YellowFin™ Mobile WiMAX analyzer is the world’s first truly portable calibrated, demodulating WiMAX test receiver. This handheld unit utilizes the Samsung Q1 Ultra tablet UMPC as an interface in conjunction with Berkeley’s precision receiver technology for complete spectrum analysis as well as WiMAX packet demodulation. The receiver sweeps the 2.0 ...more

Yellowjacket®-TABLET is both a Windows XP® tablet UMPC spectrum analyzer and 802.11b/a/n/g packet demodulator. The calibrated receiver measures between 2.0 - 5.9 GHz covering such popular wireless bands including Wi-Fi, Wi-MAX, ISM, Public Safety, Bluetooth and more. Powerful spectrum analysis features include user selectable power triggers, 3 pair ...more

The Model 3540 is a two-channel DSP-based instrument that can be configured as a Central Office (FXS) on one or both channels, and/or as Telephony Equipment (FXO) on one or both channels. Central Office Simulation allows the Model 3540 to generate DC Voltage plus a wide range of country-specific SMS, Caller ID, FSK, Ringing, Call Progress, Noise, ...more

Giga-tronics Model 8003 Precision Scalar Network Analyzer combines a 90 dB wide dynamic range with the accuracy and linearity of a power meter in a single instrument. The Model 8003 Precision Scalar Network Analyzer can make accurate, single sensor power measurements over a frequency range of 10 MHz to 40 GHz with a dynamic range of -70 to +20 ...more

VNA Master MS2024A is a handheld Vector Network Analyzer designed to make accurate vector corrected 1-port magnitude, phase, and Distance-To-Fault measurements and 1-path 2-port magnitude and phase measurements from 2 MHz to 4 GHz. For field engineers and technicians supporting aerospace & defense platforms, commercial wireless backhaul, a ...more

The Model 8220 is a single-phase AC + DC power meter with an electroluminescent backlit digital display and is rated to 600V Cat III. It is a measurement tool for electrical parameters and distribution network disturbances, enabling the user to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, powe ...more

The PowerPad® Jr. Model 8230 is a single-phase power quality analyzer that is easy-to-use, compact and shock-resistant. It is intended for technicians and engineers to measure and carry out diagnostic work and power quality work on single- or three-phase balanced load networks. Users are able to obtain instant waveforms of an electrical network’s p ...more

The Model 8220 is a single-phase AC + DC power meter with an electroluminescent backlit digital display and is rated to 600V Cat III. It is a measurement tool for electrical parameters and distribution network disturbances, enabling the user to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, pow ...more

The Model 8220 is a single-phase AC + DC power meter with an electroluminescent backlit digital display and is rated to 600V Cat III. It is a measurement tool for electrical parameters and distribution network disturbances, enabling the user to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, powe ...more

The PowerPad® Jr. Model 8230 is a single-phase power quality analyzer that is easy-to-use, compact and shock-resistant. It is intended for technicians and engineers to measure and carry out diagnostic work and power quality work on single- or three-phase balanced load networks. ...more

The PowerPad® Jr. Model 8230 is a single-phase power quality analyzer that is easy-to-use, compact and shock-resistant. It is intended for technicians and engineers to measure and carry out diagnostic work and power quality work on single- or three-phase balanced load networks. ...more

The Model 8220 is a single-phase AC + DC power meter with an electroluminescent backlit digital display and is rated to 600V Cat III. It is a measurement tool for electrical parameters and distribution network disturbances, enabling the user to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, powe ...more

The Model 8220 is a single-phase AC + DC power meter with an electroluminescent backlit digital display and is rated to 600V Cat III. It is a measurement tool for electrical parameters and distribution network disturbances, enabling the user to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, powe ...more

The PowerPad® Jr. Model 8230 is a single-phase power quality analyzer that is easy-to-use, compact and shock-resistant. It is intended for technicians and engineers to measure and carry out diagnostic work and power quality work on single- or three-phase balanced load networks. Users are able to obtain instant waveforms of an electrical network’s p ...more

First responders to network emergencies rely on the EtherScope Series II Network Assistant when it's time for action - a handheld portable network analyzer combining essential tools that help network professionals quickly solve the wide range of problems they encounter - 10,100 and Gigabit, twisted pair and optical fiber LANs and wireless LANs. ...more