Nano

The DG101 Digital Delay Generator is a compact PCI module designed to furnish four precisely timed outputs when triggered by an external input. Each output delay and terminal pulse width is independently programmable. Delays up to 167 ms may be programmed with one nanosecond resolution, while extremely low jitter operation makes each cycle pre ...more

The new d-Drive line in the program of piezo nano-controllers from piezojena combines the highest positioning accuracy with a unique handling comfort. This means that all features can be controlled by a PC and the main functions can be directly handled with the front panel too.  ...more

The PDL-200A combines dual electromechanical trombones internally in series to extend the total delay range to a maximum of 1.25 nanoseconds.  In one single unit, the PDL-200A offers the same resolution (to 0.50 ps step size) as the PDL-100A while doubling the total delay range of the instrument.  The PDL-200A is equivalent to two PDL-100A's ...more

This hand-held digital logic probe provides convenient and precise use in the measurement of logic circuits. It displays logic levels (high or low), pulses and voltage transients down to 25 nanoseconds.  ...more

The unique design of the DS45-40 makes it a tool of choice for OEM application such as in nano-indentation, optical and electron microscopy. It can also be used as a stand-alone tool for surface charaterization of virtually any type of materials. ...more

Solar Model 9355-1 Pulse Generator is designed to provide impulse excitation by means of an injection probe placed around interconnecting cables or power wires. The unit uses a charged transmission line (50 ohms) to generate a pulse with less than 2 nanoseconds rise and fall time, and duration of approximately 30 nS, calibrated in a 50 ohm ...more

The Nanovea Nano Scratch Tester exploits a normal force range to 500 mN, and is well suited for adhesion failure studies of thin films and coatings with thickness below 500 nm. With its long scratch path and very precise load control, the Nanovea Nano Scratch Tester is an important tool for the study of crack initiating and marring application ...more

The Model 233 is a large Faraday Cup designed to measures charge on large samples when used in conjunction with the ETS Model 230 or equivalent Nano coulomb meters. The Model 233 includes a double-walled shielded bucket, cover and 36? BNC-BNC cable. ...more

The Model 232 Faraday Cup is a medium size (ID 6? x 3?) bucket that measures charge on medium size samples when used in conjunction with the ETS Model 230 or equivalent Nano coulomb meters. The Model 232 includes a double-walled shielded bucket, cover and 36? BNC-BNC cable.  ...more

The 2011 X-ray nanotomograph from Skyscan provides non-destructive 3D microscopy of the internal structures of small objects with spatial resolution down to ~400 nanometers. It is now possible to achieve the spatial resolution of a synchrotron in the convenience of your own laboratory. ...more

The new TRITOR 200/20 is a new basic element of the ultra compact nano positioner series TRITOR. These piezoelectrically driven stages are based on piezosystem jenas well-known stiction / friction free flexure hinges design. This principle provides ultra-high resolution and remarkable guiding precision. A special feature is the integrated ...more

The Nanovea Nano-Indentation Tester with IBIS technology is a high precision instrument for the determination of the nano mechanical properties of thin films, coatings and substrates. Micro Photonics collaborated with renown nano-mechanical expert Dr. A.C. Fischer-Cripps to offer this advanced technology. With the Nanovea Nano-Indentation Teste ...more

The answer to modern nano science challenges is the unique GEMINI® field emission SEM column, a sophisticated solution recognised by microscopists worldwide as the leader. The new SUPRA series, based on the 3rd generation GEMINI® column, offers a complete range of ultra high resolution FESEMs models to cover all fields of applications in nano t ...more

Basic Hawk Co-Processor card set with 2.0 Mbyte memory and microcoded instructions for Nova 4X and Eclipse S280. Executes ALU instructions in 275 nanoseconds. ...more

Hand-held digital logic probe provides convenient and precise use in the measurement of logic circuits. It displays logic levels (high or low), pulses and voltage transients down to 25 nanoseconds. High intensity LED readouts provide instant response to the logic state. ...more

The ORTEC Model 425A Nanosecond Delay provides a calibrated delay for any type of signal in 1-ns steps from 0 to 63 ns. Longer delays can be obtained by cascading several Model 425As. The delays are accomplished with RG-58A/U coaxial cables that are interconnected by stripline sections. ...more

Aerotech?s ANT-20RA is a high-performance rotary actuator specifically designed to be attached to ANT, FiberAlign 90 and 130 series nano-positioners. ...more

The IST-8800 is a fully programmable, low cost tester that provides parameter measurements or parametric GO/NO GO test for transistors, diodes, MOS-FETs, Regulators, Triacs, Zeners, SCRs, and J-FETs. These devices can be tested up to 5 amps or 1200 volts with a measurement range down to the nano amp range. Only four universal test fixtures are requ ...more

The PCX-7410 is a high power CW and pulsed current source designed to drive diode lasers, bars and arrays. It delivers current pulses variable from 2A to 10A, pulse widths variable from 50 nanoseconds to 500 milliseconds with rise times <30 nanoseconds, and pulse repetition frequencies variable from single shot to 100KHz (1MHz when external ...more

The PCO-7810 is a compact, economical OEM laser diode driver module designed to provide extremely fast, high current pulses to drive laser diodes in range finder, LIDAR, atmospheric communications and other applications requiring high current, nanosecond pulses. ...more

FB-2100 is a Focused Ion Beam nano mechanical probing system. S)TEM/SEM specimen can be prepared with rapidity and accuracy. High milling rate with accelerating voltage up to 40kV. In-situ microsample extraction from specific site with Hitachi's patented "Micro-sampling" (optional accessory). ...more

Aerotech?s Nano-Translation (ANT) stages are clearly the best in class in combining speed, accuracy, resolution, repeatability, reliability, and size. ...more

The PCO-7120 is a compact, economical OEM laser diode driver module designed to provide extremely fast, high current pulses to drive laser diodes in range finder, LIDAR, atmospheric communications and other applications requiring high current, nanosecond pulses. It offers variable output current from 5A to 50A, with continuously variable pulse ...more

32 Data Channels from DC up to 25MHz. RS-232 standard interface. 100MHz maximum acquisition speed. 5 nanosecond glitch capture. 4 step multi-level trigger sequencing with delay & restart ...more

Aerotech?s NanoTranslation Crossed-Roller (ANT-LX) stages are the best in class in combining speed, accuracy, resolution, repeatability, reliability, and size. As an evolution of the popular ANT stage family, ANT-LX linear stages exhibit enhanced motion performance over Aerotech?s first generation ANT series. ...more