NIckel Cadmium Battery - aka NiCd,NICAD

Sponsor Your Catalog
  • Chek-A-Cell 3276 - Multi-Battery Tester for Sealed Lead-Acid, NiMH, NiCad Li-Ion Batteries Load Tests 6 and 12 volt sealed lead acid, NiCad, Li-Ion, and NiMH batteries. Works for batteries from 1 to 10 Amp Hours. Measures within 0.01 volts. Economical and Easy to Use. Polarity Reversal Indication and Protection. Powered by battery being tested. Large, bright LED display (0.56″). Ohmmeter Voltage Mode detects either polarity voltage including AC. Padded Cordura Carrying Case Included. Selectable DC Amps Polarity. 1 year warranty.
    Triplett
  • MH-C9000 - WizardOne Battery Charger-Analyzer for 4 AA / AAA It's like having four charger-analyzers for AA and AAA NiMH / NiCD batteries. Refresh & Analyze: Charges the battery, rest for one hour, discharge, rest again, then recharges it. Selectable charging and discharging rate. Break-In: Also known as IEC capacity measurement and "Battery Forming". Charges battery at 0.1C for 16 hours, rest for one hour, discharges battery at 0.2C, then recharges again at 0.1C for 16 hours.
    Maha Energy
  • BT4 - BATTERY TESTER Full function tester from. 1.5V button cells to 22.5V photo & lantern cells. Tests nickel cadmium rechargeables
    All-sun
  • BT5 - BATTERY TESTER Full function tester from: 1.5V button cells to 22.5V photo & lantern cells. Tests nickel cadmium rechargeables
    All-sun
  • Superseder III - Battery Charger-Analyzer for large battery systems The Superseder III is a precision instrument designed to charge and analyze primarily NICKEL-CADMIUM batteries exactly as recommended by the battery manufacturers
    JFM Engineering
  • CAL-100 - Calibrator for Battery Charger-Analyzers The CAL-100 is an instrument designed to verify the performance and to calibrate Battery Charger-Analyzers used on Nickel-Cadmium, Lead-Acid and other types of batteries.
    JFM Engineering
  • MASTERCharger - Battery Charger-Analyzer for large battery systems The MASTERCharger is a precision instrument designed to charge and analyze primarily NICKEL-CADMIUM batteries exactly as recommended by the battery manufacturers (It can also test LEAD-ACID and other types of rechargeable batteries, 
    JFM Engineering
  • VCM-100 - Calibrator for Battery Charger-Analyzers The VCM 100 is an instrument designed to verify the performance and to calibrate Battery Charger-Analyzers used on Nickel-Cadmium, Lead-Acid and other types of batteries.
    JFM Engineering
  • Minicharger - Battery Charger-Analyzer for small battery systems The Minicharger is an instrument designed to charge, trickle charge and analyze (discharge) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries
    JFM Engineering
  • Supercharger - Battery Charger-Analyzer for large battery systems The Supercharger is a precision instrument designed to charge and analyze primarily NICKEL-CADMIUM batteries exactly as recommended by the battery manufacturers (It can also test LEAD-ACID and other types of rechargeable batteries,
    JFM Engineering
  • CD4000 - Luminaire Battery Tester The ACT CD4000 Luminaire Battery Tester is designed to reduce the time taken to test 2.4 - 12V rechareable Lead Acid, Lithium-ion, Nickel-cadmium and Nickel Metal Hydride batteries commonly used in stand-alone emergency lighting luminaires, security and fire alarm panels, battery powered tools, bicycles and toys etc.
    ACT Meters Ltd
  • Ultra-Max Plus Kit - IEEE/NERC Battery Compliance Testing Kit Eagle Eye's Ultra-Max Plus Kit is the complete solution for testing per IEEE and NERC standards. The Ultra-Max Plus Kit has three parts: an IBEX-Ultra Portable Ohmic Battery Tester, SG-Ultra Max Digital Hydrometer, and Exmons Ultra+ All-in-One Management Software. The Ultra-Max Plus Kit tests internal resistance (internal ohmic values), voltage, inter-cell resistance (connection resistance), temperature, DC current, ripple current, specific gravity (state of charge), and electrolyte temperature. Using the Ultra-Max Plus Kit is the fastest and most precise way to test batteries according to IEEE and NERC standards. Meet IEEE standards 450-2010, 1188-2005, and 1106-2005, which are the industry-recommended standards for maintenance, testing, and replacement of Vented Lead-Acid (VLA) stationary batteries, Valve-Regulated Lead Acid (VRLA) batteries, and Vented Nickel-Cadmium (NiCad) Batteries. NERC requires compliance with standard PRC-005-2, which requires utilities to document and implement programs for maintaining the reliability of the bulk electricity systems. The Ultra-Max Plus Kit meets these requirements for VLA and NiCad batteries. The Ultra-Max Plus Battery Testing Kit has been adopted by utilities nationwide to meet PRC-005-2 to avoid costly downtime and NERC-issued fines. The Ultra-Max Plus Kit Includes: IBEX-Ultra Battery Testing Kit SG-Ultra Max Digital Hydrometer Exmons Ultra+ All-in-One Software The IBEX-Ultra is the fastest portable battery tester in the industry today - accurate results are displayed in just 3 seconds. The IBEX-Ultra utilizes a patented ripple-removing algorithm to identify problematic or failing cells. Battery bank management is easy with the IBEX-Ultra. Store up to 4,800 results and 80 alarm settings. The SG-Ultra Max is the premier digital hydrometer in Eagle Eye's SG-Series digital hydrometer/density meter line. Configured to work with the IBEX-Ultra, the SG-Ultra Max is used to test the specific gravity and temperature of your electrolyte providing essential state-of-charge battery information. All the results are imported into the included Exmons Ultra+ Battery Management Software. This comprehensive software program is developed to ensure the integrity of your backup battery systems. Easily upload the results from the IBEX-Ultra and SG-Ultra Max into Exmons Ultra+ to track history, trend test data, view graphs, export to Excel, and create complete battery service reports with the click of a button. Easily print out, store and email accurate reports within minutes. Eagle Eye's IEEE/NERC Kits are completely customizeable to meet your specific battery testing requirements. Let us know your specific applications, testing requirements and budget, and we can tailor a battery testing kit to fit your needs.
    Eagle Eye Power Solutions
  • TCS-1 - Battery Trickle charger The TCS-1 Trickle Charger is a low current, constant current/constant voltage charger It can be used to trickle charge Nickel-Cadmium and Lead-Acid batteries. Its primary use is to maintain the batteries at full charge while the batteries are in storage (to compensate for the battery self-discharge). Adjustable float voltage and maximum charging current. Usable on batteries up to 100A-Hr The TCS-1 can also be used as a full charger for batteries of up to 5.0A-hr (@ C/10).
    JFM Engineering
  • Supersederxg - Battery Charger-Analyzer he SupersederXG is an instrument designed to charge, trickle charge and analyze (discharge) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries.

    With its multiple modes of operation of Constant Current Charge (dual and single rate), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge (analysis), Resistance Discharge (analysis) and Full Discharge (deep cycle), the SupersederXG can satisfy the requirements of most large (10 A-hr to 100A-hr) rechargeable battery systems.
    JFM Engineering
  • BITE2 and 2P - Battery Impedance Test Equipment The BITE 2 and BITE 2P Battery Impedance Test Equipment determine the condition of lead-acid and nickel-cadmium cells up to 7000 Ah. An advanced feature set has been developed that includes Pass/Warning/Fail calculations based on a user-entered baseline value, advanced printing functions and more. The case of the BITE 2P consists of both the transmitter and a carrying case for all of the standard accessories and some of the optional accessories, in an all-in-one unit. The BITE 2 and its accessories fit into a sturdy canvas case with a shoulder strap.
    Megger
  • 5095 - Traceable® Countdown Controller Turns any piece of equipment on or off at the end of a set time. Nicad backup battery.
    Control Company
  • SuperMasterCharger - Battery Charger-Analyzer for large battery systems (10A-hr to 100A-hr) The SuperMasterCharger is an instrument designed to charge, trickle charge and analyze (discharge) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries.

    With its multiple modes of operation of Constant Current Charge (dual and single rate), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge (analysis), Resistance Discharge (analysis) and Full Discharge (deep cycle), the SuperMasterCharger can satisfy the requirements of most large (10 A-hr to 100A-hr) rechargeable battery systems.

    The instrument features safety interlocks to protect the operator, the charger and the battery in the event of reversed polarity connection, short circuit, open circuit (no load) and Overvoltage conditions.
    JFM Engineering
  • miniMasterCharger - Battery Charger-Analyzer for small battery systems (up to 10A-Hr) The miniMasterCharger is an instrument designed to charge, trickle charge and analyze (discharge) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries. With its multiple modes of operation of Constant Current Charge (dual and single rate), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge (analysis), Resistance Discharge (analysis) and Full Discharge (deep cycle), the miniMasterCharger can satisfy the requirements of most small (0 to 10 A-hr) rechargeable battery systems. The instrument features safety interlocks to protect the operator, the charger and the battery in the event of reversed polarity connection, short circuit, open circuit (no load) and Overvoltage conditions.
    JFM Engineering
  • SG-3-A/B - Portable Telsa Meter SG-3-A/B Portable Telsa Meter is with cadmium nickel charge battery, which is rechargeable and used repeatedly. Lasting 10-25 hours at each time, suitable for occasion of without DC power device.
    Yuxiang Magnetic
  • 24-400xg - Battery Charger-Analyzer for small battery systems (up to 10A-Hr) The 24-400XG is an instrument designed to charge, trickle charge and analyze (discharge) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries. With its multiple modes of operation of Constant Current Charge (dual and single rate), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge (analysis), Resistance Discharge (analysis) and Full Discharge (deep cycle), the 24-400XG can satisfy the requirements of most small (0 to 10 A-hr) rechargeable battery systems. The instrument features safety interlocks to protect the operator, the charger and the battery in the event of reversed polarity connection, short circuit, open circuit (no load) and Overvoltage conditions. Two large LED digital meters permit the simultaneous monitoring of voltage and current, while eight indicator lights inform of the status of the operation.
    JFM Engineering
  • 4000001 - Battery Tester Tests all various batteries. Can be used with Alcaline, NiMH, NiCd-batteries. All sizes. Single batteries can be tested. Strength is shown on the meter of the tester.
    Ansmann AG
  • IP 3802-701G - DC withstand voltage tester Specifications power system, anywhere without the test voltage can be set • The actual output voltage of the battery charger is built-in, combined with a trickle charge and fast charge to control the charging current of up to five times the memory of NiCad batteries charging featured refreshed to eliminate the effect of grounding scheme / G · E grounding scheme
    Musashi Intek
  • 58250-1014 - CBA IV - Computerized Battery Analyzer True constant current battery capacity test with results graphically displayed, constant power testing supported with Extended software upgrade Discharge current is software and electronically regulated using a solid state switch and fan cooled electronic load Test any type of battery; coin cell to automotive or larger. Presets for NiCad, NiMH, Lead Acid, Li Ion, Li Poly, Alkaline, Carbon Zinc, Mercury etc.
    West Mountain Radio
  • 4000643 - Battery Check Battery Tester - AA/AAA/9V/CR-V3/2CR5 Compact battery tester for AA/AAA/9 V/CR-V3/2CR5/CRP2. For rechargeable NiCd/NiMHs as well as primary cells. Indication in 20% steps.
    Ansmann AG

Results 1 - 24 of 35

NIckel Cadmium Battery - Rechargeable batteries based on nickel oxide and cadmimum electrodes.