Multifunction I/O

The KPCI-1801HC/1802HC multifunction data acquisition boards combine high performance with high channel capacity. They make it simple to gather analog data, read and output digital signals, provide analog stimulus, and much more. Both boards provide 32 differential or 64 single-ended inputs and two analog outputs. The KPCI-1801HC offers softwa ...more

This universal card eliminates the need for specialized, single function cards by providing an assortment of functions on one single card. The ?mother board? contains 3 independent module slots, each of which can be populated with a function specific module. The available functions are as follows: A/D, I/O Digital TTL, I/O Digital Defferential ...more

The 78C1 is a universal 6U cPCI Multifunction I/O Board that eliminates the complexity and size constraints of using multiple, independent, single-function cards. It contains 6 module positions, each of which can include the functions of A/D (10-channels), D/A (10-channels), Discrete I/O (16-channels), TTL I/O (16-channels), RTD (6-channels), ...more

These multifunction data acquisition cards are for use with notebook and other PCs equipped with a PCMCIA port. They are ideal for field applications such as in-vehicle test as well as for laboratory applications where space is at a premium or portability is required. ...more

The 64C1 is a universal Multifunction VME I/O Board that eliminates the complexity and size constraints of using multiple, independent, single-function cards. It contains 6 module positions, each of which can include the functions of A/D (10-channels), D/A (10-channels), Discrete I/O (16-channels), TTL I/O (16-channels), RTD (6-channels), Sync ...more

Reconfigurable Multifunction I/O Using the LabVIEW FPGA Module ...more

Reconfigurable Multifunction I/O Using the LabVIEW FPGA Module ...more

Low-cost, multifunction I/O devices for PCMCIA. It offers up to 50 kS/s, 12-bit performance on eight single-ended or four differential analog inputs; two 16-bit, 8 MHz counter/timers; and eight digital I/O lines. ...more

Low-cost, multifunction I/O device for ISA computers,24 digital I/O lines; 2 analog outputs ...more

The National Instruments DAQPad-6016, which delivers USB functionality equivalent to PCI and PXI DAQ devices, is designed specifically for mobile or space-constrained applications. Plug-and-play installation minimizes configuration and setup time, while direct screw-terminal connectivity helps keep costs down and simplifies signal connections. NI m ...more

Low-cost, multifunction I/O device for ISA computers, 8 analog inputs; 24 digital I/O lines ...more

The NI Measurement Hardware Driver Development Kit (DDK) provides development tools and a register-level programming interface for the development of custom driver software. The NI Measurement Hardware DDK is designed for OEM customers who are developing applications that require nonstandard OSs and provides access to the full device register map a ...more

PDXI-MFS boards build on all the power of the PDXI-MF Series including DSP control of all I/O subsystems. Here you have a choice of four or eight inputs running in either single-ended or differential modes. Three resolution grades and corresponding sampling rates are available: 16-bits (500 kS/s), 14 bits (500 kS/s, 800 kS/s and 2 MS/s) or 12 b ...more

Model PCI-A12-16A is a multifunction, analog-to-digital, digital-to-analog, and digital I/O card. It accepts up to 16 single-ended inputs or eight differential inputs. Inputs are protected against over-voltage conditions up to ±35 volts and typically survive static discharges beyond 4000 volts.  ...more

When you know you'll be setting up a stimulus/response test, a closed-loop system or if you just want to be ready for any kind of testing situation, a multifunction board is the logical choice. Our PDXI-MF PXI Multifunction boards pack everything you'll likely need: as many as 64 single-ended/32 differential analog to digital inputs running at s ...more

When you know you'll be setting up a stimulus/response test, when you know you'll be implementing a closed-loop system or if you just want to be ready for any kind of testing situation, a multifunction board is the logical choice. Our PD2-MF Series PCI multifunction boards pack everything you'll likely need: as many as 64 single-ended/32 differ ...more

IIRO4-2SM is a USB multifunction device, incorporating a USB 4-port hub internally to provide four optically isolated digital inputs, four electromechanical relay outputs and two ports of RS-232/422/485 serial communication in one small product. The digital portion is ideal for adding easy-to-install isolated input and relay output capabilitie ...more

PD2-MFS boards build on all the power of the PD2-MF Series including DSP control of all I/O subsystems. Here you have a choice of four or eight inputs running in either single-ended or differential modes. Three resolution grades and corresponding sampling rates are available: 16 bits (300 or 500 kS/s), 14 bits (500 kS/s, 800 kS/s and 2 MS/s) or ...more

The AD12-16 and AD12-16F are multifunction high-speed analog/digital I/O cards for use in IBM Personal Computers. They are full length cards that can be installed in expansion slots of IBM PC/XT/AT and compatible computers. With this card installed, the computer can be used as a precision data acquisition and control system or as a signal anal ...more

The 104-AIO16-16E is an economical 16-bit resolution board which provides speeds up to 250kHz for 16 single-ended or 8 true differential analog input channels. This multifunction board features an excellent price/performance value for precision PC/104-based data acquisition, control, or signal analysis of standalone environmental test station ...more

The Exacq Technologies XM Series of multifunction analog I/O boards was designed to provide high speed and 16 Bit precision at a low price to meet challenging PC-based instrumentation applications. All XM Series boards utilize an onboard processor, large local memory buffers, and PCI bus mastering to provide glitch-free capture and output of an ...more

The Al216E is a 3/4-1ength, multifunction, high-speed analog/digital I/O card for use in ISA-bus Computers and compatibles. With this card installed, the computer can be used as a precision data acquisition and control system or a signal analysis instrument. All connections are made through standard 37-pin D type connectors at the rear of the ...more

The high-speed Model LPCI-A16-16A provides 500k samples/second, with 16-bit resolution, for the board?s 16 single-ended or eight differential analog input channels. Also included are two 12-bit analog outputs, 16 digital I/O lines and an 8254 with three 16-bit counter/timers.  ...more

The CPCI-MFIO-6U is a 6U CompactPCI multifunction I/O board. The CPCI-MFIO-6U offers 32 channels of 16 bit A/D, four 16 bit D/A, 16 digital I/O, counter / timers, and one PMC expansion slot for additional I/O. There is a local 60 Mhz TMS320C31 DSP processor to supervise all the I/O activity. The DSP can be programmed by the end user to execute ...more

The PCI-20098C Carrier Boards are designed with flexibility in mind. All of the most popular analog/digital I/O features are already on board, plus you can expand the on-board I/O capabilities by adding up to two plug-in option modules. You can also increase the number of analog input and digital I/O channels and counters, or add analog output ...more