Microwave Meters

URV35 is a voltmeter and power meter for versatile applications in service and production as well as for precision measurements in RF and microwave labs. A large variety of probes and sensors allows voltage measurements up to 3 GHz and power measurements up to 40 GHz. ...more

High performing microwave frequency counter with integrated power meter. Ultra fast 250,000 measurements/sec of frequency and power. CW and burst measurement of frequency and power. 12 digits/sec frequency resolution. Short acquisition time of 25 ms (auto) or zero (manual). Modulation Domain Analysis with optional TimeView software. Frequency range ...more

Broadband field meter with data logger for electric and magnetic field measurements from RF to microwave. Available with isotropic probes to cover 100 kHz to 60 GHz. Large graphical display. Plug-and-play probe interface with automatic probe parameter detection ...more

Amitec model NAX10 is a low cost, high performance X band microwave network analyser using a power meter, reflectometer and microwave source. The power meter can measure power levels from -30dBm to +20dBm and cover frequencies from 8.2GHz to 12.4GHz. The power meter is designed to easily measure Gunn and Klystron Source outputs without PIN modu ...more

No matter whether you work in the lab or in production  the Microwave Power Meter R&S NRP is always the right choice. The versatility of the novel Power Meter Series R&S NRP is due to the newly developed sensors. These sensors are intelligent standalone instruments that communicate with the basic unit or a PC via a digital interfa ...more

Compact, easy to operate with thermometer, beaker and case. The center of the scale is at 5 mW/cm2 with a range from 0 up to 10 mW/cm2 , to measure the permitted limit values for microwave ovens in USA, Canada, and Europe ...more

Designed for use with bolometer elements to measure high frequency or microwave power from 10µW to 30 mW. Model 1806 also functions as a standard for the calibration of bolometers mounts, detectors, RF voltmeters, and for precision insertion loss measurements when used with the TEGAM System IIA, automatic power meter calibration system. ...more

No matter whether you work in the lab or in production - the Microwave Power Meter R&S NRP is always the right choice. The versatility of the novel Power Meter Series R&S NRP is due to the newly developed sensors. These sensors are intelligent standalone instruments that communicate with the base unit or a PC via a digital interface. T ...more

Available with Isotropic Probes to cover 100 kHz to 60 GHz. Plug-and-Play Probe Interface with Automatic Probe Parameter Detection. Fully Automatic Zeroing. Extra Small and Lightweight ...more

# Small and compact meter with clear analog indication. # Triple function: * Gauss meter, magnetic field, 50Hz - 500Hz. * Electric field meter, 40Hz - 100KHz. * RF field strength, 100KHz - 2.5GHz. ...more

Amitec Model FSM20 PLL synthesized Digital Field Strength Meter has been designed for experimentation and teaching of various commonly used circuits in L Band (Microwave band) in the laboratory for students of all levels. This equipment can be used as a very stable carrier receiver with internal demodulation facilities in a wide variety of appl ...more

AT437C is a low cost high performance microwave power meter for microwave power measurement. It can measure the frequency range from 50 MHz to 18.0 GHz. It can measure power levels 1uW 100mW. It's a portable design keeping in mind the bench and field service application. AT437 power indicator from its AT11801 power sensors and components. ...more

The CPMXXE series instruments are high precision broadband Calorimetric Sensors operating in millimeter and sub-millimeter wave range on a principle of substitution of microwave power by direct current power, using an autocompensating transistor transducer. Calorimetric Sensor is supplied with Calorimetric Power Meter M1-25M (indicator block), ...more

This Kit combines our two most popular quick-check devices: our Electrosmog Detector which detects any strong microwave fields which may be in your vicinity; and our Digital EMF/ELF meter which detects and measure electric and magnetic fields from electrical wiring and appliances. ...more

The Multiple Application Platform (MAP) RF switch cassette is a 50 Ohm coaxial switch for routing RF and microwave signals at frequencies up to 26.5 GHz. Comprising of single and dual 1 x 2 and bypass-type switches, these cassettes are an ideal solution for routing 10 Gb signals between power meters, receivers, and spectrum analyzers. The swit ...more

AV4942A Satellite Communication Integrated Tester is a multi-parameter and multi-task testing instrument, which has integrated multiple microwave measuring functions such as in spectrum analyzer, cymometer, power meter and synthesized signal source. ...more

Built in meter measures voltages up to 40KVDC ?Factory calibrated at 25KV (±2% accuracy); full scale ±3% accuracy ?Input impedence: 600Mohm ?Meets IEC1010 safety requirements ?35" ground lead ?Positive polarity only, not for microwave ovens ...more

This Kit combines our two most popular quick-check devices: our Electrosmog Detector which detects any strong microwave fields which may be in your vicinity; and our Digital EMF/ELF meter which detects and measure electric and magnetic fields from electrical wiring and appliances. ...more

MSI Time-Domain-Reflectometry (TDR) Structural-Health Monitoring probes the structural health of a composite part by propagating a fast electrical pulse along a distributed linear sensor which has been fabricated directly in the laminate. The sensor is formed from the native graphite fibers already used in composite manufacture, and constitute ...more

The AV2432 power meter is a new generation diode detectors' universal power meter, which based on DSP technology. With built-in 50MHz power sweep calibrator, it can trace standard of power and automatically calibrate the amplitude response of a power Probe. ...more

PICOPROBE MODEL 10 is a multipurpose, high speed, passive probe which can be used for driving as well as receiving signals. The Model 10 consists of a one meter length of flexible 50 ohm coaxial cable terminated by a carefully trimmed SMA on one end and by a miniature, high speed 50 ohm connector, specially developed to receive Model 10 replac ...more

The AV2434 microwave power meter a high accurate measurement instrument used for measuring average power, peak power, peak-to-average ratio of broad band microwave CW signals and complex modulated signals. ...more

The instrument is a combination of spectrum analyzer, synthesized generator, power meter, frequency meter. Its compact structure, advanced features and high reliability eliminate the difficulties when multiple test sets are transported and maintained. ...more

The AV4941 Digital Microwave Communication Complex Tester combines multi-path fading simulator, link measurement personality, power meter, frequency counter, scalar network analyzer and signal source into a portable system. It is used in the measurement of multi-path fading specifications in mobile communications, including dynamic, static M-curves ...more

AV43003 Power Meter Modulefeatures a wide frequenc band, a big power range, high precision and rapid measurement. It is a necessary module in the VXI Microwave Test System. ...more