Magnetic Test

The ELT-400 for measuring magnetic fields in occupational and public environments and in EMC laboratories is especially designed for use by health and safety professionals in industry and insurance. The instrument performs precise B-field measurements in the frequency range from 1 Hz to 400 kHz. The ELT-400 uses a standards-compliant 100 cm2 p ...more

Need to stick to a good ground or test point? Get the Mag Lead, a great new product. Mag Lead features a magnetic disconnect near the test probe end. Just disconnect the test probe and you can ?stick? to any metallic ground or test point.  ...more

Inter magnetic version to prevernt interference from magnetic field. Double protection of diode and fuse, less malfunction. Transistor hFE test function ...more

An advanced, multi-capability, low-cost EMC immunity test system to address a broad range of testing capabilities including Bellcore, UL, IEC, ANSI/IEEE, CCITT and ETSI. Designed to test well beyond the requirements of the CE Mark, users can configure the EMCPro Plus to meet specific test requirements using the full line of options and accesso ...more

The ST33 is a PC based system that will test electrical windings of motors, actuators and other electro-magnetic devices. It generates a high voltage, low current energy pulse across coil winding leads and samples the resulting waveform. ...more

The Helmholtz coil system concept, developed by a German physicist over a century ago, is a system that is normally used to generate magnetic field levels of specified volume and uniformity, allowing scientists and engineers to perform numerous experiments and test functions that require a known ambient magnetic field. Helmholtz field generatio ...more

Ideal for characteristic measurement and analysis in the high performance magnetic heads. Adopting the high frequency circuit and the spin stand aim for narrow track, the characteristic of magnetic head (GMR/TMR/Perpendicular) can be measured and analysis by the tester. ...more

The RF 1 probe set contains magnetic field probes and an E-field probe for precompliance tests of printed circuit boards. Measuring the magnetic fields in the area of the module, conducting tracks, components and the modules of the supply system is the basis for selective measures to reduce disturbance emissions. ...more

PMM 1008 is a magnetic immunity test system for making tests according to IEC 1000-4-8 and EN 61000-4-8 normatives. The system is composed by a programmable current generator and an induction square coil with mast and truck. ...more

Rhein Tech Laboratories (RTL) provides Telecom EMC testing for the United States and European telecommunication industry in accordance with Network Equipment Building Systems (NEBS) Generic Requirements GR-1089-CORE (Electromagnetic Compatibility and Electrical Safety Generic Criteria for Network Telecommunications Equipment standard) and Euro ...more

Shielded transformer jaw opens to 1.2". 100uA high resolution. Least affected by external magnetic field,providing wide measuring range from very small to large current. Designed to safety standard IEC 61010-2-032:over-voltage CAT.III,300V and pollution degree 2. Data hold function to allow for easy reading in dimly lit or hard-to-reach l ...more

MAGNETIC TEST SYSTEMS: KJSA is a manufacturer of magnetic hysteresigraphs, search coil fixtures, magnetic calibration standards, coercimeters, electromagnets, magnetizing coils and custom magnetic testing equipment. An area in which KJSA has particularly distinguished itself is in developing commercial methods and fixtures for measuring accura ...more

MET Laboratories boasts proven, superior capabilities in Electro-Magnetic Compatibility (EMC) compliance testing. Our EMC laboratory as grown over 300% in the last 6 years, and has become one of the most respected labs in the U.S. ...more

The RF 2 probe set contains magnetic field probes for precompliance tests of printed circuit boards. Measuring the magnetic fields in the area of the module, conducting tracks, components and the modules of the supply system is the basis for selective measures to reduce disturbance emissions. ...more

Since introducing the first hysteresisgraphs in the 1960's, Walker Scientific has been leading the development of automatic hysteresisgraphs for magnetic material analysis that meet or exceed ASTM and other international magnetic standards. The ease of use of the Walker Scientific AMH Series Hysteresigraphs renders them ideal for both R&D a ...more

4040MB is a test system based on the magnetic suspension flying probes technology; expressly conceived to test passive and active back panels. The 4040MB mechanical architecture allows to contact both pads (test and device soldering) and connectors pin. This allows to contact every backpanel configurations. The high accuracy axis assure the co ...more

Ideal for measurement in the Coercive Force of magnetic disks. A high speed, precision assembly and gap forming line for 5th generation 1200mm x 1350mm substrate. Process cells in 40 seconds when configured with a single aligner and 8 gap-forming stations. Precision, non-contact alignment and single-press recipes enhance control over assembly proce ...more

Electrical Test. Microscopc Inspection. We have manufactured over 5,000 different head designs. If we don't have one to suit your requirements, we will design and prototype it quickly and economically.  ...more

  KTL facilities support a wide range of accredited Electro Magnetic Compatibility (EMC) and wireless testing services. Our experienced staff can assist with all EMC requirements for compliance testing to European and international standards, and can advise on pre-compliance investigative testing, which is invaluable in product developmen ...more

magnetic properties of permanent magnets on a confidential basis for industrial and government clients. As an independent test laboratory, KJSA can provide accurate B vs. H and (B-H) vs. H magnetization curves, measured on any type of permanent magnet material over a temperature range of -150ºC to +350ºC using computer-automated equipment. Tes ...more

Measuring equipment suitable on-site to measure the iron loss value of magnetic steel plate used for electric equipment. It displays digits of the iron loss value per 1kg or 1lb by only one sample magnetic steel plate. Since the RS232C interface is equipped , you can handle this by PC. You can also print the result by thermal printer which is ...more

Are designed for checking the quality of PVC coated wires during manufacturing at shop floor. The PVC wire is passed through brass ball chains which carry high voltage. If any pin hole comes in PVC, a spark develops and electro magnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit. ...more

The Single Phase TTR, Transformer Turns Ratio Test Set, measures the turns ratio and exciting current of windings in power, potential and current transformers. Deviations in turns ratio readings indicate problems in one or both windings or the magnetic core circuit. ...more

The LDS V9 electrodynamic shaker is designed to test heavy loads at high levels over long continuous periods. It uses a revolutionary design of two magnetic gaps driven by one field coil to provide displacement up to 75 mm (3 in) with a peak velocity of 3 m/s (118 in/s ...more

The ability to generate controlled, high-intensity electric and magnetic fields over the frequency range of 10 kHz to 100 MHz and a unique design make the EFG-02 the best choice for conducting immunity testing on large, heavy, or bulky DUTs. ...more