MMIC

The MICRO LAMBDA broadband switched YIG Tuned Oscillators are signal sources covering the Frequency range of 2 to 20 GHz. These oscillators are two YIG circuits assembled under a single magnetic structure. The circuits share a single MMIC amplifier to guarantee +14 dBm over 2-18 GHz and +13 dBm over 2-20 GHz. A MMIC switch is used to switch between ...more

This line of low-power, compact frequency synthesizers employs a single module design, implemented with CMOS ASIC, advanced RF MMIC, and a dedicated microcontroller. A KU-band synthesizer with 1 KHz step, 2.2 GHz bandwidth and integrated L-band LFLO consumes only 8 Watts. This 65% saving over competing units translates into lower operating tem ...more

The UA5M15MP is a two-stage pHEMT amplifier MMIC in a Pb-free leadless plastic QFN package. The IC features a positive gain slope that offsets package loss, resulting in a SMT part with excellent gain flatness across a broad bandwidth. ...more

SMALL AND SMART DESIGNED satellite. SIGNAL STRENGTH METER. ANALOG METER for easier readouts. Frequency range 900MHz to 2,050MHz. Highest input sensitivity through MMIC technology. Built in integrator for BROAD BAND FREQUENCY scanning. LED indicator for horizontal (18V) or vertical (13V) polarization ...more

Analog Meter for Easy Readout. Audible Tone Changes Pitch with Signal Strength. Fast Response Speeds Adjustment. Expanded Scale Meter for Precise Alignment. 950MHz to 2050MHz Operation. Sensitive MMIC Meter Amplifier  ...more

The RM807 PAM for is a fully matched, surface mount module for TDMA / PCS and WLL applications. Small and efficient, it packs a full 1850-1910 MHz bandwidth coverage into a single compact package and meets the stringent spectral linearity requirements of TDMA / PCS transmission with high power-added efficiency to output power of 29.5 dBm. A si ...more

Farran offers its capability in the custom design and manufacture of Mm-Wave Active Multipliers. We specialize in custom designed MMIC based amplifiers, multipliers and sub-assemblies. These active multiplier products use MMIC based or hybrid components to offer the highest performance at lowest cost. The nominal output frequency range is 10-1 ...more

SKY77147 System Smart PAMa fully matched, surface mount module developed for PCS and WLL applications. Small and efficient, it packs full 17501805 MHz coverage into a single compact package and meets the stringent spectral linearity requirements of CDMA PCS transmission with power output of up to 28 dBm. A single GaAs MMIC contains a ...more

FLNA series low noise amplifiers are constructed with discrete or MMIC PHEMT devices that operate at the frequency range from 18 to 96 GHz. These amplifiers are especially designed for low noise applications. The amplifiers are offered in two categories, namely, standard and custom build. ...more

The AS130-73 is a high isolation GaAs MMIC FET IC SPST Switch in the SOT-6 low cost plastic package for commercial applications. Switch is matched on J2 port and reflective on J1 port when in isolation state. ...more

A sample of broadband MMIC-based block upconverter modules is shown below. The units feature extensive filtering to provide a very clean output signal with low spurious response. Below is a sample of the Upconverters available in the BUC Series. Variants of these designs are possible; please contact Farran Technology for details.  ...more

SKY77149 System Smart PAM, a fully matched module for CDMA / PCS applications, meets stringent spectral linearity requirements of CDMA PCS and maintains high PAE for power output up to 28 dBm. A single GaAs MMIC contains all on-board bias circuitry and input and interstage matching circuits. Output match, realized off-chip within the module pa ...more

FGA series high power amplifiers are discrete and/or MMIC PHEMT devices based amplifiers that operate at the frequency range between 18 to 96 GHz for gain added applications. The amplifiers are offered in two categories, namely, standard and customer build. The customer build amplifiers are offered in various RF interfaces, including standard ...more

CX77112 PA is a small and efficient surface mount module for PCS and WLL applications with full coverage of the 18501910 MHz bandwidth. It meets the stringent spectral linearity requirements of CDMA / PCS transmission, with high power added efficiency up to power output of 29 dBm. The single GaAs MMIC contains all active circuitry, on-boa ...more

FPA series high power amplifiers are discrete and/or MMIC PHEMT devices based amplifiers that operate at the frequency range between 18 to 96 GHz for high output power applications. The amplifiers are offered in two categories, namely, standard and customer build. The customer build amplifiers are offered in various RF interfaces, including st ...more

SKY77152 PAM, a fully matched surface mount module for WCDMA, packs full coverage of the 19201980 MHz bandwidth into a single compact package. It meets stringent spectral linearity requirements of WCDMA transmission with high PAE and improves efficiency for the low RF power range. The single GaAs MMIC contains all active circuitry, includ ...more

RM806 dual-mode PAM is a fully matched, LCC surface mount module for TDMA /AMPS mobile units operating in the 824-849 MHz cellular bandwidth. It meets stringent IS-136 linearity requirements beyond 30 dBm output power and can be driven to power output levels beyond 31 dBm for high efficiency FM mode operation. A single GaAs MMIC contains all a ...more

SKY77156 System Smart PAM, a fully matched, surface mount module developed for CDMA/AMPS and WLL applications. Small and efficient, it packs a full 824849 MHz coverage into a single compact package. It meets stringent IS95 CDMA linearity requirements to and exceeding 28 dBm output power and can be driven beyond 31 dBm for high efficiency ...more

CX77105, a dual-mode PAM for CDMA/AMPS and WLL applications, packs full coverage of the 824-849 MHz bandwidth. It meets stringent IS95 CDMA linearity requirements to and exceeding 28 dBm output power and can be driven beyond 31 dBm for high efficiency FM mode operation. The single GaAs MMIC contains all active circuitry, on-board bias circuitr ...more

RM805 PA is a fully matched, surface mount module designed for PMR, WLL, and TDMA/AMPS mobile units operating in the 806-849 MHz cellular bandwidth. MMICs comprised of GaAs and CMOS contain all active circuitry in the module, which includes on-board bias circuitry as well as input and interstage matching circuits. The output match into a 50 oh ...more

SKY77154 System Smart PAM for CDMA / AMPS and WLL applications meets stringent IS95 CDMA linearity requirements to and exceeding 28 dBm output power and can be driven to levels beyond 31 dBm for high efficiency in FM mode. A low current pin (VCONT) provides improved efficiency for the low RF power range. A single GaAs MMIC contains all on-boar ...more

CX77106 PAM is a fully matched surface mount module for CDMA Korean PCS and China SCDMA applications for full coverage of the 1720-1780 MHz bandwidth. The single GaAs MMIC contains all active circuitry, on-board bias circuitry, input and interstage matching circuits. Output match to a 50 ohm load within the module optimizes efficiency and powe ...more

SKY77161 PAM is a fully matched, surface mount module for TD-SCDMA applications including multi-slot operation. It packs full 2010-2025 MHz bandwidth coverage into a single compact package and meets the stringent spectral linearity requirements of TD-SCDMA, with high power added efficiency for power output of up to 28 dBm. A single GaAs MMIC c ...more

CX77107, a fully matched surface mount PAM for PCS and WLL applications, packs full coverage of the 1850-1910 MHz bandwidth meeting stringent spectral linearity requirements of CDMA/PCS with high PAE up to 28 dBm power output. The single GaAs MMIC contains all active circuitry, on-board bias circuitry, input and interstage matching circuits. O ...more

Auriga has the RF & Microwave experience to help companies achieve never-before-seen MMIC designs and non-linear models with unparalleled performance. Supplementing customers’ design and modeling resources or delivering turnkey solutions. ...more