Link Test

The Vanguard Express family of Protocol and Link analyzers are designed for today's engineer working with PCI Express based development. Useful for debugging, testing and validating the PCI Express protocol, the Vanguard Express analyzer allows testing of x1, x4 and x8 PCI Express card-edge and XMC form factors. ...more

The Smartronix LinkUp? Ethernet Tester will provide the first response for troubleshooting network connectivity problems. The unit’s LEDs provide instant basic connection status. The LCD display allows more detailed link analysis through the menu system. Auto-negotiation capabilities can be scrolled through. Power-Over-Ethernet voltages can be read ...more

The Vanguard Express family of Protocol and Link analyzers are designed for today's engineer working with PCI Express based development. Useful for debugging, testing and validating the PCI Express protocol, the Vanguard Express AdvancedMC analyzer allows testing of x1, x4 and x8 PCI Express in the AMC form factor. ...more

The Noyes M200 from AFL Telecommunications offers unmatched OTDR capabilities in a handheld package weighing less than 1 kg (2 lb). Multimode, Single-mode, and Quad wavelength models are offered. With short dead zone and intermediate range specifications, the M200 is ideal for Tier 2 testing of premises (building and campus) networks or certif ...more

The NPRT 2200 performs Noise Power Ratio measurements to determine the dynamic range of optical transmitters, amplifiers and other active devices used in HFC networks. It has an internal broadband noise source, selectable filters and a measuring receiver. ...more

The LANMASTER 25 Link Tester provides LAN Installers and Maintainers a tool to quickly test Fast Ethernet (100baseTX) and Standard Ethernet (10baseT) links. Fast Ethernet LAN products have a wide range of new features and capabilities. Auto-sensing, Auto-negotiation and Full Duplex capabilities are optional requirements to the Fast Ethernet (I ...more

The LanMaster 35 is a new handheld tester used for installing and maintaining Local Area Networks (LAN) using Power over Ethernet (PoE). The LanMaster 35 Power and Link Tester conducts power tests with actual loads to ensure that when a powered device such as a VoIP phone, wireless access point or security camera is connected to the network it ...more

Manual ranging digital multimeter with temperature and capacitance for field service technicians. For more features and specs on Capacitance, Temperature, Frequency (autoranging), Diode Test, Continuity, Peak Hold, Overload Protection please click on the Detailed Specs link. ...more

The LANMASTER 20 Link Tester provides LAN Installers and Maintainers a tool to quickly test Fast Ethernet (100baseTX) and Standard Ethernet (10baseT) links. Fast Ethernet LAN products have a wide range of new features and capabilities.  ...more

True RMS digital multimeter with temperature and backlightfor contractors and field service technicians. For more features and specs on Capacitance,Temperature, Frequency, Duty Cylce, Diode Test, Overload Protection please click on the Detailed Specs link. Autoranging; Display: 3-3/4 digit LCD, 3999 counts with 41-segment analog bar graph. ...more

The LANMASTER 26 Link Tester provides LAN Installers and Maintainers a tool with the testing capability for Gigabit (1000baseTX) over copper, Fast Ethernet (100baseTX), Standard Ethernet (10baseT) links as well as VoIP/PoE detection.  ...more

For more features and specs on Resistance, Continuity, Diode Test, Battery Test, Overload Protection please click on the Detailed Specs link. Non-contact voltage detector. Separate door for easy battery and fuse access. Manual Ranging; Display: 3-1/2 digit LCD, 1999 counts. Display Update Rate: 2.5/sec, nominal. ...more

The essential link tester for today's Gigabit Ethernet, PoE, and 802.1X networks. Link at 10/100/Gig – identify device capabilities and confirm actual connected speed/duplex status. Ping key devices – measure response statistics of DHCP, default router, DNS server, and other key devices or URLs. Verify 802.1X settings – authenticate on 802.1X secur ...more

Quickly check for circuit voltage, or continuity! Indicates four voltage ranges from 6V to 24V. Quick check to test injector firing, primary ignition circuits, bad grounds, broken wires, fusible links and more! ...more

Quickly test on board computer and electrical circuits! Computer & air bag safe! Check for broken wires/fusible links, bad grounds, switches and more ...more

Certifies compliance of multimode fiber networks to industry standards. Look to CertiFiber to test more fibers in less time. With its one-button Autotest, CertiFiber allows you to measure fiber length and optical loss on two fibers at two wavelengths, compares the results to the selected industry standard and provides an instant PASS or FAIL i ...more

Qualify, Store, Print. Gigabit Performance Qualification- Test to IEEE 802.3 standards. Selectable Performance Testing- qualify performance of Data, Voice over IP, and IP Video applications. Performs Gigabit Ethernet link establishment test in 10 seconds. ...more

Fully compliant with Category 6/ISO E draft standards. Full Category 6/ISO E AutoTest with graphs in approximately 25 seconds. Tests Cat 7/ISO F limits up to 350 MHz. Advanced link adapter method provides more versatrility & reduces cost of ownership. Built in TDR ready for copper and fiber. ...more

Allows cable makers to configure custom cables. The BB-25 will visually let you know the status of lines 2, 3, 4, 5, 6, 8, 20 and 22 on the DTE side by utilizing red/green bi-color LEDs. Provides signal status at a glance (four states: mark, space, clocking and off). Complete cable "breakout" and reconfiguration exists with 24 in-lin ...more

Timing Extractor is an addition to the Wave Wizard design to ATE link toolset. The extractor allows fast extraction of timing from given VCD/EVCD file in a syntax that could be used on the ATE platform.  ...more

TV Test Transmitter R&S SFQ is a complete solution for testing digital TV links and receivers. The open-end software and modular hardware make the R&S SFQ future-proof. The standards for DVB-T, DVB-S/DVB-DSNG, turbocoding, DVB-C, J.83B and ATSC/8VSB are fully complied with. Thanks to its adaptability to future system changes, R&S S ...more

The HDG-20 portable video test generator offers an extensive list of advanced features at an affordable price. The HDG-20 provides still and moving test patterns in SD and HD formats at full broadcast quality. It also outputs audio tone, time code and closed caption characters. It even features a dual-link 2k resolution video output and an optional ...more

Provides comprehensive trigger, filter, display, and decode functions. Includes real-time performance monitor, statistical analysis, protocol error detection, pattern generation and integrated power connector for device testing. Front panel indications for OOB in Progress, Link Established, Speed Indicator, Errors, and Trigger. Ethernet and US ...more

The KD Optics Mini Multimode power meter and Mini LED source are designed for the 850nm and 1300nm testing of multimode links, fibre continuity testing, connector testing, transmitter power testing etc. ...more

Supports x8, x4, and x1 lane configurations. PCI Express exerciser with standard, integrated analysis system (capture, trigger, and display). Configurable as endpoint or root complex. Includes advanced error injection capabilities at all layers, comprehensive packet generation features, advanced filter and trigger functions, intuitive packet c ...more