Light

All purpose demodulator probe, usable with most oscilloscopes. Features light weight design and 48" (1.2m) coaxial cable. 100KHz to 950MHz Bandwidth# +3dB Accuracy# 200V Max input voltage# 50VeffHF Voltage# 250mV Actuating voltage# 5pF Input capacitance ...more

The G2000 hAs been designed specifically for manufacturers of lighting products to allow complete electrical safety testing in a production environment and to the relevant national and international standards. Comprehensive Electrical Safety Tester: Performs Continuity, Polarity, Light up, Ground Bond and Hipot Test for Class I and Class II lig ...more

RS MM-3 series intelligent Multi-meter is an updated version of RS MM-2 with adjustable light source, be designed with portable and ease-to-operate, which verify the frequency automatically. It can be used as an optical power meter, and stabilized light source. ...more

With safe and credible Great curve tech ST820 Optical Fiber Identifier could identify transmission directions without interrupting service and cutting fiber. The measure signal will not affect the normal signal because of low loss. And it can also test the speed with help of comparison light. There are 5 grades indication for identified signal ...more

The NIC is a scalable solution for verifying and qualifying the performance of today's multiprotocol global communications networks.With a flexible software/firmware-based architecture, the scalable NIC Plus combines in a single platform the multitude of traditional hardware-based test sets required to install, maintain, and monitor high-speed ...more

The Noyes OPM5 optical power meter from AFL Telecommunications may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 5 also measures insertion loss of multimode or single-mode cables. The OPM5 offers Wave ID, automatic wavelength identification and switc ...more

The Noyes OLS7-FTTH and OLS7-3 laser sources from AFL Telecommunications are cost-effective, rugged, handheld instruments designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, both models may be used for fiber identification. The ...more

The Noyes HiLite and VFI 2 products from AFL Telecommunications are compact but powerful visible red laser sources designed to troubleshoot faults on fiber optic cables. Light generated by these units will escape from sharp bends and breaks in jacketed or bare fibers, as well as poorly mated connectors. They can identify faults in fiber optic ...more

The OWM is a cost-effective solution for optical monitoring of DWDM networks including DWDM optical power, wavelength, and OSNR. The OWM available in 50 GHz or 100 GHz configurations with up to 8 ports. The OWM is the first shelf-level, intelligent sub-system for centralized management of remote DWDM wavelengths that can also be used as a port ...more

This low cost, reliable, miniature sensor and amplifier module converts IR radiation into 4-20mA or mV/degree linear signal. Models for range of 0°C to 500°C (0°F to 1000°F) are available. An optional protective cooling jacket and air purge sight tube assembly is available to protect the sensor in light industrial environments. ...more

The Model 2520 Pulsed Laser Diode Test System with Remote Test Head is an integrated, synchronized system for testing laser diodes early in the manufacturing process, when proper temperature control cannot be easily achieved. The Model 2520 provides all sourcing and measurement capabilities needed for pulsed and continuous LIV (light-current-v ...more

GAO08611 Handheld Optical Multi Meter integrates both optical power meter module and optical light source module which can implement loop-around test by using both modules , and also can work individually by function switch operation in the menu . It is specifically designed for technical support personnel to take tests on a variety of instruments ...more

GAO08311 Optical Talk Set is a latest self-developed intelligent instrument that combines functions both of digital optical phone and stabilized light source in one set.It's widely used in operations of Installation, optical testing, maintenance and fiber attenuation value testing in Data network, CATV and Telecommunication network. GAO08311 Talk S ...more

GAO08241 Series three wavelength light source includes three wavelengths at two ports,and one of the default wavelength is 650nm red laser.It enables GAO08241 not only provides the continuous or modulated laser output for the measurement of the 1310/1550nm SM fiber or 850/1300nm MM fiber,but also easily identifies the cutting of all kind of the fib ...more

FCST08231 advanced stability handheld optical light source is an updated version of FCST08222 series handheld optical light source enhanced with adjustable frequency. Which is integrated abroad test instruments advantages and mainly aim to high requirements of the users. With features of large LCD display, friendly operation interface and opti ...more

GAO08232 optical light source is one of the latest self developed test instrument.It can provide 1 to 4 wavelength output according to the specific requirements including the 650nm red source,1310/1550nm wavelength for the single mode fiber and 850/1300nm wavelength for the multimode fiber. Together with GAO08232 optical power meter, it acts as a p ...more

FCST08112 mini handheld optical power meter is the most compact in size and lightest in weigh self-developed test instrument, with features of easy-to-use and economy advantages which be used for absolute power measurement of fiber optic. FCST08112 accompanies with FCST08221 mini handheld light source to become the most portable and advantages ...more

FCST08232 optical light source is one of the latest self developed test instrument.It can provide 1 to 4 wavelength output according to the specific requirements including the 650nm red source,1310/1550nm wavelength for the single mode fiber and 850/1300nm wavelength for the multimode fiber. Together with FCST08232 optical power meter, it acts ...more

The GAO-9A Adjustable Digital Light Attenuator is mainly used for the attenuation of continuous optical signal power, whose core components are imported high-performance ones to enable it to have the ability of quick regulation of attenuation value with good linearity, high accuracy, low insertion loss and attenuation locating, etc. ...more

LP-226 optical light source is one of the latest self developed test instrument.It can provide 2 to 4 wavelength output according to instrument. the specific requirements including the 650nm red source,1310/1550nm wavelength for the single mode fiber and 850/1300nm wavelength for the multimode fiber. Together with LP-226 optical power meter, it act ...more

FCST08221 Mini optical light source is the most rugged size instrument in the industry. It integrates the super small size and strong function in one unit. With 3 pieces of 1.5v alkaline batteries, can work 40 hours continuously, the total weight is only 80g .Together with FCST08221 Mini optical power meter, they provide a excellent solution f ...more

Applied in parameter test in optical transmission, with high sensitivity and accuracy. Detection of optical transmission system, attenuation, optical core check, etc; Compatible with international optical instrument. ...more

LP-236 Handheld Optical Multi Meter integrates both optical power meter module and optical light source module which can implement loop-around test by using both modules,and also can work individually by function switch operation in the menu.It is specifically designed for technical support personnel to take tests on a variety of instruments with a ...more

GAO08612 handheld optical multi meter is an upgrade version of GAO08611, it integrates functions of both intelligent optical power meter module and high stable light source module which can implement loop-around test by using both modules,and also can work individually by function switch operation in the menu.Perfect combination to make your fiber ...more

GAO08222 Handheld Optical Light Source is an essential instrument for field or laboratory testing of optical communication which can be used with an optical power meter for measuring optical loss on Single-mode or Multi-mode fiber cable. GAO08222 is the earliest light source model in GAO, It features compact size, high output power, stable output p ...more