Integrated Circuit

Photon Dynamics is a leading supplier of rapid thermal processing (RTP) equipment for the flat panel display industry, and in particular, for the fast emerging technology of low-temperature poly-silicon (LTPS). Low temperature poly-silicon is made from amorphous silicon deposited onto glass substates. The amorphous silicon is crystallized usin ...more

Skyworks silicon Schottky diode chips are intended for use as detector and mixer devices in hybrid integrated circuits at frequencies from below 100 MHz to higher than 40 GHz. Skyworks "Universal Chip" design features a 4 mil diameter bond pad that is offset from the semiconductor junction preventing damage to the active junction as ...more

Skyworks silicon hyperabrupt junction varactor diode chips are processed using established ion-implantation technology resulting in low RS wide tuning ratio devices with high Q values. These planar chips have a small outline size (12 x 12 mils nominal) and are fully passivated resulting in low leakage current and high reliability. These varact ...more

The board is designed as part of Tx demo as well as an independent unit.The board consists integrated circuit for complete process from signal input to AF output with de emphasis.  ...more

The MicroMag3 is an integrated 3-axis magnetic field sensing module designed to aid in evaluation and prototyping of PNI Corporation?s technology. The MicroMag3 combines PNI Corporation?s patented Magneto-Inductive (MI) sensors and measurement circuit technology for unparalleled cost effectiveness and performance. The MI sensors change inducta ...more

Skyworks' APD Series of silicon PIN diode chips are designed for use as switch and attenuator devices in high performance hybrid microwave integrated circuits.These PIN diode designs are useful over a wide range of frequencies from below 100 MHz to beyond 30 GHz. These devices utilize Skyworks' well established silicon technology resulting in ...more

Skyworks' APD Series of silicon PIN diode chips are designed for use as switch and attenuator devices in high performance hybrid microwave integrated circuits.These PIN diode designs are useful over a wide range of frequencies from below 100 MHz to beyond 30 GHz. These devices utilize Skyworks' well established silicon technology resulting in ...more

Skyworks silicon hyperabrupt junction varactor diode chips are processed using established ion-implantation technology resulting in low RS wide tuning ratio devices with high Q values. These planar chips have a small outline size (12 x 12 mils nominal) and are fully passivated resulting in low leakage current and high reliability. These varact ...more

Teradyne provides integrated program-development software and run-time software with all test and inspection systems and instruments, such as Spectrum in-circuit and functional testers, M9-series digital instruments, Ai7-series analog instruments, and so on. Product-specific software is described in the appropriate product section. ...more

Skyworks silicon hyperabrupt junction varactor diode chips are processed using established ion-implantation technology resulting in low RS wide tuning ratio devices with high Q values. These planar chips have a small outline size (12 x 12 mils nominal) and are fully passivated resulting in low leakage current and high reliability. These varact ...more

Micro-Cap 9 is an integrated schematic editor and mixed analog/digital simulator that provides an interactive sketch and simulate environment for electronics engineers. ...more

Skyworks' APD Series of silicon PIN diode chips are designed for use as switch and attenuator devices in high performance hybrid microwave integrated circuits.These PIN diode designs are useful over a wide range of frequencies from below 100 MHz to beyond 30 GHz. These devices utilize Skyworks' well established silicon technology resulting in ...more

The Paragon is a multi-capability ESD and Latch-up test system for testing advanced integrated circuits. The Paragon system allows users to test devices from 256 pins up to 1024 pins. With such a broad pin count range, users are given the opportunity to test both simple and complex components, such as system-on-chip devices, using one test syst ...more

The MicroMag is an integrated 2-axis magnetic field sensing module designed to aid in evaluation and prototyping of PNI Corporation?s technology. The MicroMag combines PNI Corporation?s patented Magneto-Inductive (MI) sensors and measurement circuit technology for unparalleled cost effectiveness and performance. The MI sensors change inductan ...more

The CX74041 is a single supply, monolithic integrated circuit designed for use in WCDMA and UMTS voice/data applications in the IMT-2000 frequency band. The device is also intended for use with CDMA portable phones in the PCS band. This highly integrated superheterodyne receiver comprises all the critical components needed to implement the rec ...more

PICOPROBE MODELS 28 and 29 have been designed to serve the needs of integrated circuit engineers working in the most advanced high speed, submicron, MOS technology. These high frequency instruments include the attractive features of the Models 18B and 19 including full dc capability, negligible dc current drain, and extremely low input capacit ...more

ETBoundary provides a complete solution for the creation and integration of boundary scan cells and related control logic for embedded test and diagnosis of integrated circuit (IC) semiconductor I/O as well as test and diagnosis of board-level interconnect nets between ICs. Access to the boundary scan cells is provided through LogicVision's Te ...more

The LDX-3200 Series Precision Laser Diode Drivers are a best-in-class family of high precision microprocessor-based instruments that offer a high stability, low noise current source with integrated laser diode protection circuits, specifically for controlling laser diodes. ...more

T-4 tips are for use in most standard commercial micropositioners for probing integrated circuits, pads, or lines. ...more

The CMR-25 current sensor builds on patented company technology to offer superior sensor performance and accuracy in current measurement applications. The current sensor utilizes an ASIC (Application Specific Integrated Circuit) and a Magnetoresistive (MR) magnetic sensor to provide extremely low offset drift with temperature, resulting in sta ...more

THE DONAR, Model A35 DC AMPERE-HOUR METER displays accumulated direct current in an electrical circuit. An electromechanical counter totalizes integrated current values as ampere-hours (the product of instantaneous current values and time). Retains reading after complete power failure. ...more

The Agilent Technologies N5391A Low-Speed Serial Data Analysis (SDA) software for I2C and SPI provides a fast and easy way to debug the Inter-Integrated Circuit (I2C) and 2-wire or 3-wire Serial Peripheral Interface (SPI) serial communication busses found in a wide variety of embedded designs. It provides protocol-level debug information to Ag ...more

The PICOPROBE MODEL 12C is a high speed, high input impedance active probe for measuring the internal node voltage of integrated circuits. The input is 1 megohm shunted by 0.1 pf and the rise/fall times are 0.8 ns. This instrument has full dc capability and can be used with any oscilloscope.  ...more

The PICOPROBE MODEL 12C is a high speed, high input impedance active probe for measuring the internal node voltage of integrated circuits. The input is 1 megohm shunted by 0.1 pf and the rise/fall times are 0.8 ns.  ...more

PICOPROBE MODELS 28 and 29 have been designed to serve the needs of integrated circuit engineers working in the most advanced high speed, submicron, MOS technology.  ...more