Dual Buddy - SATELLITE INSTALLER'S SIGNAL METER, SAT FINDER The Dual Buddy sat finder is a satellite signal meter that measures relative RF signal strength when connected to a dish antenna. The Dual Buddy's two input connectors and switching capabilities allow the measurement of separate satellite feeds and simultaneously display their relative signal strength, alowing the installer to easily balance a multi-sat installation.

Companion - Installation Signal Level Meter ComSonics new SLM designed for installers. Very easy to use, lightweight, and features a vivid, easy to read color display, digital and analog measurement capabilities, cable modem and browser, scrolling touch pad user interface and rugged exterior built to withstand the rigors of field duty.

Sat Buddy 2 - SATELLITE INSTALLER'S SIGNAL METER, SAT FINDER The Sat Buddy 2 sat finder measures relative RF signal strength when connected to a dish antenna. It's great for aligning a dish antenna to receive maximum signal strength, and for verifying signal presence within the in-house cabling network.

E-CM1 - CCTV Test Meter This handheld battery operated meter is a must-have tool for CCTV installers. It measures five important camera signal attributes which allows the user to troubleshoot his CCTV system.

2001AD-C - Installers Meter Auto detects whether measuring Analogue or Digital signals on Cable TV systems. Measures signal level and Signal to Noise of digital carriers. Error corrected software. Specification <+- 2dB ( Typically <+-1dB.)

DisplayMaxJr Series - CATV Technician and Installer Meters DisplayMax Jr. Series offers a full range of meters allowing you to order only the features you need. From basic signal measurements to Ingress and Leakage testing. Digital Channel Testing QAM, QPSK, VSB.

IMdigital T203 - Installers Meter VHF & UHF operation, 50 to 860 MHz. Auto detects whether measuring Analogue or Digital Terrestrial signals. Measures signal level (A & D) and Signal to Noise of digital carriers. Error corrected software. Specification <+- 2dB ( Typically <+-1dB.)

RA2000 - Digital Signal Level Meter The Digital signal level meter Devic200 provides main functions installers and operators are looking for in a econormic signal level meter. Capable of analog and digital measurements of cable TV network, including channel level, C/N, V/A, trunk voltage, digital channel power, BER, MER, at an affordable price. Designed to easily test DVB-C channels.

VePAL CX100 - CATV Network Testing A next generation CATV installer meter to characterize and measure Analog and Digital video signals. For Analog carriers, Peak Video level, single or dual channel Audio levels and Carrier to Noise measurements are possible on NTSC, PAL, or SECAM video formats. Digital QAM16/64/256 carriers with or without deep Interleaving are measured accurately with MER, BER and Constellation diagram results being reported.

HS-CVT9 - CCTV Tester for Video Surveillance Function & Characteristic:
8 useful functions help installer test and check devices
Video test function, high resolution LCD screen
PTZ control and test function
Output DC12V power to camera
Video signal attenuation analyzing
Multi-meter function

All-in-one Battery-powered Tester with 2.5" Color LCD Monitor # Portable measuring device for all CCTV installers & professionals
# Multiple functions;
1. CCTV Field Monitor 2.5" color LCD monitor
2. Video Signal Generator to inspect color bar
3. Multi-meter to test both AC & DC
4. PTZ Controller to program PTZ cameras
5. Protocol Analyzer to determine PTZ protocol
6. UTP Cable Tester to test Cat.5 cable
# It's a portable video monitor to set up CCTV

RY-S200 - Signal level meter TV Field Intensity This product applies to the need of the television and cable television engineering installation and detection, it is the high-performance surveying instrument specially designed for the cable television technical personnel.

RY-S100 - Signal level meter RY-S100 Signal level meter TV Field Intensity applies to the need of the television and cable television engineering installation and detection, it is the high-performance surveying instrument specially designed for the cable television technical personnel.

Airbeeper Very small and handy meter for installation of DVB-T antennas. • Extremely easy to use, no buttons or knobs. • Pitch-tone indication in the earphone, stronger signal – higher tone. • Automatic attenuation of strong incoming signals. • Powersupplied by the DVB-T set-top box or external 9v battery. • Low price, very affordable! • CE-approved.

Horizon MiniSAT - Signal Strength Meter The "MiniSAT" is a simple to use, low cost signal strength meter for digital satellite installation. Features include a large easy to read backlit LCD, integral Ni-Mh battery pack, dual inputs, audible signal indicator, 22KHz tone and DiSEqC switch command generation and a receiver loop through.

RA2007 - Analog measurement, RA2007 signal lever meter is adapting for CATV installation and measurement which is designed specifically for high-performance measuring instruments. It adopts a wider LCD, the use of microprocessor makes the function enhanced much more. It supports single channel measurement, dual channel measurement, carrier difference measurement, carrier-to-noise ratio measurement, memory of last measurement status etc.

GAO 828B - CATV Signal Level Meter GAO828B Signal level meter is specially designed and manufactured for CATV system installation and testing. It's a portable device, easy to carry with many functions.GAO828B is the latest mode from GAOTEK and features with the compact dimension and the fashion design. It can be used to test CATV signal levels both at channel and frequency modes.

STEST-895 - CCTV Security Camera, DVR, CCTV Tester 3.5" TFT LCD (Supply 12V 1A Power to Camera) > CCTV system installation and maintenance > Dome camera and All in one camera testing > The CCTV transmitting channel testing > Digital multimeter / Optical power meter/PTZ controller/Video signal generator / UTP cable tester/Audio tester > Battery works 12 hours

083.034A - MultiMeter-Compact Reliable, fast and precise voltage, current and resistance measurement – Automatic continuity tester with acoustic signal – Diode test function for determining integrity and polarity – Fully protected design in all measuring ranges prevents operating errors – Automatic function and range changeover without reconnecting cables – CAT III - 1000 V – can be used for measurements throughout building installations

SH-500 - Multi-functional Meter Quick satellite signal finding Program play、video monitoring Rapid satellite cable and LNB detection Quick satellite antenna installation Automatically calculate angle of azimuth、elevation and polarization Analogue satellite position display Compatible with DVB-S、DVB-S2、CBS MPEG-4、ABS-S 7 Inch HD TFT LCD screen(16:9) Global satellite data preset

SH-500G - Multi-functional Meter Multi-purpose design Easy operation OSD design Quick satellite signal finding Program play、video monitoring Rapid satellite cable and LNB detection Quick satellite antenna installation Built-in GPS to locate longitude and latitude quickly Automatically calculate angle of azimuth、elevation and polarization by GPS Analogue satellite position display

Digiair PRO Frequency range of 45-860MHz. • The meter to use for easy Digital terrestial installations. • Very sensitive, easy to maximize weak and strong signals. • Signal level reads out in dBuV. • Presents one channel readout with high resolution or six channels. simultaneously or the complete spectrum. • Built in beeper (pitch tone) and maxhold function. • Aerial power output, 0, 5 and 12V. • Built in, rechargeable battery. • Power supply and car-charger enclosed. • Carrying-case enclosed. • Small and handy design. • Made in Sweden.

CPM-10 - Dual Display Multifunction Meter CPM-10 Multifunction meter product single phase, three phases high　accuracy measurement of parameters such as voltage, current, active　power, reactive power, apparent power, power factor, frequency,　effective energy, with display and remote communication function. Option 1 set relay output, 1 analogue and 1 RS485 (Modbus RTU　Mode) or 1 pulse output. Most suitable for power management, remote　input/output, alarm and remote signal control uses needs. Having　case depth 120mm only, easy panel mounting installation.