Infrared Sensors

10:1 Distance to Target Ratio, 32 to 932°F. Dwyer Series ILA Non-Contact Sensors, measure temperatures from 32 to 932°F (0 to 500°C) and provide a linear 4 to 20 mA, 0 to 5 VDC or thermocouple output. The 2-wire signal is compatible with almost any indicator, controller, recorder, data logger, etc., without the need for special interfacing or ...more

The MO-4 comes standard with our cutting edge "Smart" technology.This technology consists of a computerized proximity sensor ,digital controls and a long-range infrared illuminator.The proximity sensor will automatically turn the unit on and off when it is brought to the viewing position.Total darkness tech. Standard, Total darkness tech. Standard ...more

# CO 2 : 0 ~ 6,000 ppm range, Diffusion sampling mode.# Three LCD Display for CO 2 , %RH Humidity and Air Temperature.# Maintenance free dual wavelength NDIR infrared CO 2 sensor (non-dispersive infrared).# Continuous or manual data logging (20,000 sets).# Data hold & Maximum / Minimum with Time stamp.# Data Memory and READ function.# Alarm an ...more

Infrared Sensor : Fast, accurate, & versatile. Long life expectancy. * Superior sensitivity : Toggle between three levels of sensitivity down to 0.1oz/year. * Fast warm up : Only 30 seconds between start up and detecting. * Automatic recalibration : Finds leaks even with refrigerant in the air surrounding the leak. * Peak hold : Pe ...more

Auto DATA HOLD function after releasing Meas button With SET, Hi, Lo, limits beeper function Use thermopile detection sensor (6-14mm) Automatic adjustable emissivity (e) 0.1 to 1.00 Thermocouple offset adjust  ...more

CO 2 : 0 ~ 6,000 ppm range, Diffusion sampling mode. Three LCD Display for CO 2 , %RH Humidity and Air Temperature. Maintenance free dual wavelength NDIR infrared CO 2 sensor (non-dispersive infrared). ...more

This Digital Non Contact type Infra Red Thermometer with laser sensor uses temperature sensor of Thermopile 6 - 14 mm and measures temperature from -50 to 280 Degree C and also in Fahrenheit scale. ...more

The LI-6400 was the first photosynthesis measurement system to put the CO2 and H2O gas analyzers in the sensor head. These dual path, non-dispersive infrared analyzers feature an open path design with the optical bench of the sample analyzer open directly to the leaf chamber mixing volume. Leaf dynamics are measured in real time, preventing co ...more

This Digital Non Contact type Infra Red cum Contact type Thermometer with laser sensor uses temperature sensor of Thermopile 7 - 14 mm to measure temperature from -18 to 1000 Degree C in the Non Contact Infra Red Mode and -20 to 1300 Degree C in the contact mode using K type Thermometer and also in Fahrenheit scale. ...more

Portability and simplicity one-hand operation. Dual display Back-Light feature. With MAX, MIN record function. Auto DATA HOLD function after releasing MEASURE button Use thermopile detection sensor (6-14mm) Adjustable emissivity (e) 0.1 to 1.00  ...more

The thermoMETER CTlaser temperature sensors are used in industry for precision measurement tasks. Both the laser beams mark the actual measuring spot for any distance. Faulty measurements due to imprecise adjustment are thus avoided. Temperature ranges from -40 °C to +1800 °C. ...more

Portability and simplicity one-hand operation Display Back-Light feature Auto DATA HOLD function after releasing MEASURE button Signal output function (output impedance 10KW) Use thermopile detection sensor (6-14mm) Fixed emissivity (e) 0.95 for most substances Auto power off function  ...more

4- 1/2 digit 19999 Dual LCD display,16-bit A/D,Waterproof: IP66. Temperature sensor + TC types (option). LCD display --The five sections battery electricity shows symbols. Alarm Hi/Lo,MAX/MIN. Express the state of the battery electricity. The infrared transmitted interface with USB (standard accessories) or RS232 transmission wire & window software ...more

Non-Dispersive Infrared (NDIR) CO2 sensor ensures long-term stability and durability. - 4 Measurements: CO2, CO2 Ventilation Rate, Temperature and Humidity. - Datalogging 75,000 records with fast USB download. - Large, easy-to-read display: ºC, ºF, %RH, CO2 (PPM). - CO2 reading adjusted for altitude changes. - Measurement range from 0~10, ...more

4- 1/2 digit 19999 Dual LCD display,16-bit A/D,Waterproof: IP66. Temperature sensor + TC types (option). LCD display --The five sections battery electricity shows symbols.Alarm Hi/Lo,MAX/MIN. Express the state of the battery electricity. The infrared transmitted interface with USB (standard accessories) or RS232 transmission wire & window software. ...more

DAC-CM-3, introducing a testing source not of an intensity at as much as signal levels conventionally but of AC100 voltages, allows reliable and repeatable measurements of specimen like high voltage machines even under induced or residual voltages. ...more

High-Sensitivity Semiconductor Sensors (to 50 mW).LM-2 and OP-2 Series Semiconductor Sensors offer four detector choices, a silicon sensor for 400-1064 nm (VIS), a UV-enhanced silicon sensor for 250-400 nm (UV) and a germanium sensor for 800-1800 nm in the infrared (IR). ...more

High-Sensitivity Semiconductor Sensors (to 50 mW).LM-2 and OP-2 Series Semiconductor Sensors offer four detector choices, a silicon sensor for 400-1064 nm (VIS), a UV-enhanced silicon sensor for 250-400 nm (UV) and a germanium sensor for 800-1800 nm in the infrared (IR). ...more

High-Sensitivity Semiconductor Sensors (to 50 mW). LM-2 and OP-2 Series Semiconductor Sensors offer four detector choices, a silicon sensor for 400-1064 nm (VIS), a UV-enhanced silicon sensor for 250-400 nm (UV) and a germanium sensor for 800-1800 nm in the infrared (IR). ...more

SICK ISD systems together with infrared light can be used to form cable-free transmission links for serial data in full-duplex mode. A link consists of one device pair (2 device units) with different carrier frequencies. ...more

SICK ISD systems together with infrared light can be used to form cable-free transmission links for serial data in full-duplex mode. A link consists of one device pair (2 device units) with different carrier frequencies. ...more

High-Sensitivity Semiconductor Sensors (to 50 mW). LM-2 and OP-2 Series Semiconductor Sensors offer four detector choices, a silicon sensor for 400-1064 nm (VIS), a UV-enhanced silicon sensor for 250-400 nm (UV) and a germanium sensor for 800-1800 nm in the infrared (IR). ...more

Radiator temperature up to 400°C Excellent homogeneity, precision & long-term stability Compact and rugged design Perfect for calibrating and testing infrared sensors ...more

Testing Low-voltage CCDs and IR FPAs; Military, science-grade and medical CCDs or IR FPAs; CMOS ROICs and multiplexers; CMOS sensors. Whether your application is characterizing a massive mosaic of CCDs for the next great observatory, designing a faster FLIR for a weapons-guidance system, or production-testing a CMOS image sensor for a digital cam ...more

The Comet 3 station is the Operator’s favorite Mass Wafer Transfer System. This Comet is fast, clean, reliable and accurate. Customized for your different boats and carriers. Compatible with your communication requirements and other manufacturer’s processing equipment. Integrated Infrared Heat Sensor Simple to use and easy to maintain. ...more