Industry Pack Modules

DC DC Module. Single output with total power of 100 watts. -40°C to +100°C Baseplate operating temperature (with no derating). Fixed frequency switching (375kHz). Industry standard package 1.45" x 2.28" x 0.5" ...more

DC DC Modules. High efficiency (96% Typical). Industry standard quarter brick package. 12V @ 25A Intermediate Bus Voltage for DPA application. Input UVLO and Overvoltage Protection. ...more

DC DC Modules. 10 W, Single output. 2:1 Input range . 1.0" x 2.0" x 0.33 case. Replaces AA10B. Industry standard package. ...more

DC DC Modules. 25W single output and 30W dual output. Open Frame package (Industry Standard). Positive and Negative enable Option. ...more

DC DC Modules. 10 W, Dual output. 2:1 Input range. 1.0" x 2.0" x 0.33 case. Industry standard package. Low Cost. ...more

This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. Five IP module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board. Or, combine modules of the same type for hundreds of channels on a single card. ...more

This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis. ...more

This series of plug-in mezzanine modules provides a user-customizable FPGA on an Industry Pack (IP) module. The module allows users to develop and store their own instruction set in the FPGA for adaptive computing applications. Typical uses include specialized communication systems over RS422/485 networks, test fixture simulation of signals ove ...more

The MP1000 power module and system is ideal for distributed power requirements or applications where a DC power supply is required and only wall-outlet AC is available. A proven module, the MP1000 is employed by many leading Network Equipment companies to provide a simple reliable power source for their equipment. The MP1000 offers industry leading ...more

DC DC Modules. -40degC to +100degC baseplate operating temperature. OCP, OVP, OTP (Autorecovery). Industry standard package 1.5" x 2.3" x 0.5". ...more

DC DC Modules. 15 W, Single and Dual output. High Efficiency. 2:1 Input range. 1.0" x 2.0" x 0.4 case. Industry standard package. ...more

5 Industry Pack Sites Supports single /dual widths Meets ANSI Vita 4 8/32 MHz operation Support ID, I/O, Int. & mem spaces 2 Interrupts Supports 1 & 8MB addressing Hardware self timed per IP module Triggered via system reset and software control ...more

The IPM-ASCB-MRT provides four transceivers capable of supporting Avionics Standard Communication Bus (ASCB) versions A, B, C1, and C2 bus requirements. Available as a 16-bit 32MHz single-size Industry Pack (IPack) module, the IPM-ASCB-MRT offers message scheduling and 32-bit time-tagging with a precision of one microsecond. An on-board 8MB SD ...more

The CPCI-4pack-6U module provides a high performance flexible I/O scheme, that supports industry standard Industry Packs. For application requiring low cost, high density I/O or unique combinations, the CPCI-4pack-6U is the perfect solution. The Local DSP can be used to simply move data to and from the CPCI bus or provide pre proces ...more

4 Industry Pack Sites Supports single /dual widths Meets ANSI Vita 4 8/32 MHz operation Support ID, I/O, Int. & mem spaces 2 Interrupts Supports 1 & 8MB addressing Hardware self timed per IP module Triggered via system reset and software control ...more

The CPCI-SIP module provides a 3U high performance flexible I/O scheme that supports industry standard Industry PacksÔ. For application requiring low cost, high density I/O or unique combinations, the CPCI-SIP is the perfect solution. The CPCI-SIP is also available with the Industry Pack lines routed to the CompactPCI P2 connector f ...more

The IPM-ASYNC provides a high-channel-density solution to your ASYNC RS422/485 and CSDB Avionics Protocol requirements. Available as an 8MHz single-size Industry Pack (IPack) module, the IPM-ASYNC offers message scheduling and time-tagging with a precision of one microsecond.  ...more

The IPM-ADC provides a fast 16-bit resolution Analog to Digital (A/D) conversion. Available as a 32 MHz single-size Industry Pack (IPack) module, the IPM-ADC offers programmable scan control and up to four scanning modes. ...more

The IPM-708 provides two transmit and two receive ARINC 708 display bus channels. Available as a 32MHz single-size Industry Pack (IPack) module, the IPM-708 offers 32-bit transmit and receive time tagging with a precision of one microsecond. Flexible status and interrupt flags fully support both polling and interrupt-driven software strategies ...more

The ATC-optoOUT module provides 16 digital Output lines with three 16 bit counter/timer an 4 general purpose interruptible lines. Isolation is provided via Optical Isolators with 100mA drive capability. ...more

The ATC-ALTERA is a user programmable FPGA with memory single wide Industry Pack module. There is a ALTERA 10K series FPGA and 512 kilo Bytes of external SRAM that can be accessed directly via the Industry Pack interface. The Industry Pack interface is decoded prior the ALTERA, so that the application has complete use of the ALTE ...more

The PXI-400 carrier board is a high performance, multiprotocol PXI solution to your communication requirements, supporting up to two 8/32MHz Industry Pack (IPack) modules. This new generation of intelligent carrier boards is powered by a StrongArm 200MHz RISC processor and comes with 2 MB of SRAM and 16 or 64 MB of shared memory, permitting it ...more

The ATC-SCC04 module is a quad channel serial communication controller. The ATC-SCC04 module is based on two enhanced Z85230, with larger FIFOs and several SDLC improvements from Zilog. This module provides four asynchronous ports up to 115 kbaud and synchronous ports up to 2 Mbaud full-duplex channels, with an independent baud r ...more

The ATC-SCC08 module is a octal channel serial communication controller. The ATC-SCC08 module is based on Signetics 26C198. This module provides eight asynchronous ports up to 115 kbaud full-duplex channels, with an independent baud rate generator for each channel. The large transmit and receive buffers make this one of the best ...more

The PCI-4IPM module provides a high performance flexible I/O scheme, that supports industry standard Industry Packs. For application requiring low cost, high density I/O or unique combinations, the PCI-4IPM is the perfect solution. The Local DSP can be used to simply move data to and from the CPCI bus or provide pre processing funct ...more