Industrial Computers

Use two special cameras (CCD) to collect signal so that the high beam and low beam can be really reduced its image. The testing data can be given out promptly and accurately. Use a special image analysis card with high speed to digitize the image. An embedded industrial control computer with high performance and low power sumption performs the ...more

A MultEchem 8 Electrochemistry System with up-to-eight Gamry Series G Potentiostats installed in an industrial computer. You can also configure a MultEchem using our Reference 600 Potentiostat. ...more

The CR4310/11 series current-to-voltage transducer produces a 0-5 Vdc output signal that is directly proportional to the input AC current. The output signal is average-sensing, calibrated for RMS. This transducer is used with process control and industrial instrumentation equipment. The DC output signal can be connected directly to a high imped ...more

The L Series is part of Deltron's SlimLine group of 1U high power supplies. This series of single output self-cooled models is rated up to 250 watts, with each unit measuring 1.58?H x 1.86?W x 11.32?L. Uniquely packaged and highly compact, L Series modules fit a wide range of industrial, telecom and computer networking applications. ...more

The Raptor EBX is a compact industrial controller based on the Intel Pentium III and Celeron processor and the Intel 440BX AGPset. The Raptor EBX was designed to fit into tight and narrow spaces of diverse embedded applications, offering a compact, yet powerful single-board computer. It  ...more

The CPCI-48IN is the compliment to the CPCI-48OUT. The CPCI-48IN offers 48 channels of optically isolated input connections. For industrial applications were there is a need to monitor switches, interlocks, relays, etc. Will protecting the integrity of the computer is required. ...more

The LE Series is part of Deltron?s SlimLine group of 1U high power supplies. This series of single output self-cooled models is rated at 300 watts, with each unit measuring 1.58?H x 2.10?W x 11.32?L. Uniquely packaged and highly compact, LE Series modules fit a wide range of industrial, telecom and computer networking applications. These hot pl ...more

The CM 4024 is an analog output module in the CYMOD Series that provides 4 channels of ±10V signal. Digital commands issued from a host computer through an RS-485 network are used to control output parameters. Opto-isolators provide 5000Vrms isolation to the digital section and remote-controlled analog equipment. This, along with a built-in wa ...more

The DL Series is part of Deltron's SlimLine group of 1U high power supplies. This series of DC input, single output, self-cooled models is rated at 200 watts, with each unit measuring 1.58?H x 1.86?W x 11.32?L. Uniquely packaged and highly compact, DL Series modules fit a wide range of industrial, telecom and computer networking applications. ...more

PXI (PCI eXtensions for Instrumentation) defines a rugged PC platform for measurement and instrumentation. PXI products are compatible with the CompactPCI industrial computer standard but offer additional features, such as environmental specifications, software requirements, and built-in timing and triggering ...more

magnetic properties of permanent magnets on a confidential basis for industrial and government clients. As an independent test laboratory, KJSA can provide accurate B vs. H and (B-H) vs. H magnetization curves, measured on any type of permanent magnet material over a temperature range of -150ºC to +350ºC using computer-automated equipment. Tes ...more

Custom fixturing design and fabrication for many manufactures of wire harnesses and connectors for the automotive and heavy truck, agricultural, industrial, and construction equipment, and the medical, appliance, computer and telecommunication industries. Test fixtures are also used in place of mating connectors for "hot testing" sub-assemblies, f ...more

The RADOS RTM110 Hand, Foot, Clothing Monitor is used in circumstances not requiring a full body monitor. It is suitable for various applications due to the possibility of having different detectors. The system is based on an industrial personal computer. Extremely robust, real time and multi-tasking Unix-based, operating system, designed for ...more

The Practical Instrument Electronics (PIE) Model 521 Thermocouple Simulator simulates a standard thermocouple curve over the entire industrial temperature range. The Model 520/521 provides precise temperatures for inputs to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems.  ...more

PC7compact, a rugged all-in-one embedded computer designed for industrial embedded computing applications, provides a robust, flexible hardware platform. The all-in-one Intel® Pentium® III or Celeron® Processor PC with integrated power supply is installed in a very compact EMI-protected metal housing supporting DINrail mounting. A wide variety ...more

The Practical Instrument Electronics (PIE) Model 520 Thermocouple Simulator simulates a dedicated standard thermocouple curve over the entire industrial temperature range. The Model 520 provides precise temperatures for inputs to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer system ...more

StellarNet Inc. has announced the SSRack 8-channel spectrometer system. Eight independent fiber optically coupled spectrometers operate in parallel. Each channel contains it’s own detector and associated digitizer with scan memory for simultaneous measurement on all 8 channels in parallel. The instruments are installed inside a 700Mhz industrial co ...more

IP512 Industrial I/O Pack (IP) modules provide an isolated, high-performance serial communication interface for your computer. Large FIFO buffers on the transmit and receive lines of each serial port enable more efficient data processing. When the buffer is full, an interrupt is sent to the CPU to read the data. To  ...more

LPCEB2000-B processor board is a 16/32-bit ARM7TDMI-S based industrial-oriented core computer to be your next embedded design. The tiny board is built around Philips LPC2292/2210/2212/ 2214/2290/2294 microcontroller which is able to operate at up to 60MHz. It has extended the basic features of the core with more advanced embedded peripherals v ...more

The 905U-D radio modem module provides RS232 or RS485 connections by radio. It is a low cost wireless alternative for linking data loggers and supervisory computers.The 905U-D has been designed to be easy to use and simple to install. It uses a part of the radio spectrum which does not require a radio license in most countries. ...more

The model 9052 PC-based Spectrum Analyzer incorporates the design features and accuracy of other Morrow Technologies spectrum analyzers. The 9052 is designed to be installed in an industrial PC chassis with 16 bit ISA connectors. By using the power of today's personal computers, data can be processed, stored, displayed, transferred and printed ...more

Our customers rely on our vast experience and history of best-known methods to manufacture design and build and build-to-print specialized equipment for the front-end and back-end of semiconductor/microelectronics manufacturing processes. In addition, GEM's vertically integrated manufacturing capabilities combined with our strong global supply chai ...more

The GT7960 chassis is a fault-resilient, rugged, 19" 5U high rack-mount, PC-compatible chassis presenting a revolutionary breakthrough in the IPC chassis market. Never before has such a complete and flexible enclosure been designed to fit the exact requirements of the harsh industrial environment. ...more

IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels. Isolation protects your computer system from noise, transient signals, and field wiring faults. The inputs are grouped into four 8-channel ports. Ports are isolated from the logic and each other. ...more

The "IB Series" product line contains IBM PC/AT and ISA 2.01 compatible synchro/resolver/analog converters, and absolute encoder card systems. These cards are ideally suited to many serious: test, simulation, ATE, motion control, process control and data acquisition type applications for both industrial and military concerns using any ...more