High Sensitivity Sensors

Model 6036 is a four-channel, programmable charge amplifier, filter and digitizer with a second input for piezoelectric sensors with integrated electronics (IEPE). The high-performance charge amplifier can be used to measure dynamic acceleration, pressure, force and strain from piezoelectric transducers. Two charge-to-voltage input ranges opti ...more

The SS-1 Ranger Seismometer, widely recognized as an excellent short-period field seismometer, is the terrestrial version of the "lunar seismometer" designed for the Ranger lunar program. The current SS-1 retains the original features of small size, high sensitivity, adjustable natural period and rugged watertight construction. ...more

Due to its high laser power and high optical resolution (better than 0.5 cm-1), extreme detection sensitivity can be achieved with a small size sensor. The unique design of these lasers will enable the development of low cost spectrometers. LaserChem™ is also capable of active standoff detection in conjunction with a suitable reflecting surface. ...more

The AQ2200-211 is a high-speed longwave sensor for theAQ2200 series. When it is installed in AQ2200 series frame controllers, it allows optical power to be measured with high speed and high accuracy. ...more

Northrop Grumman produces a high resolution sensor suite for the Kiowa Warrior's MMS. The suite has exceptional sensitivity and accuracy for day/night and adverse weather operation. The suite is comprised of a thermal imaging sensor for nighttime operation, a low light level television camera, a multimode tracker, and a laser rangefinder/desig ...more

Detects ALL halogenated refrigerants. Detect once power on, no need manual-adjustment. Van-speed sensitivity adjustment. Enter into the best state of detecting automatically while adjusting the sensitivity. Tricolor battery voltage indication. Equipped with quality sensor, high sensitivity, 6gr/yr. Inner precise IC with ultra-low consume circu ...more

The new Recon III ObservIR is a thermal binocular with a three field of view system that delivers excellent range performance from 45 to 220 mm. Superior to any night vision technology, the Recon III has a long-wave, uncooled imager and a high sensitivity, mid-wave InSb sensor for long range imaging. Recon III can be configured with a laser pointer ...more

SENSITIVITY 2100pc/psi. MAX PRESSURE 3,000psi. FREQUENCY RANGE 2Hz to 8KHz. ELECTRIAL ISOLATION Yes. CONNECTOR 10-32 Coaxial. MOUNTING 1.125-12 UNF-2A Straight Thread. Details High Temperature Sen ...more

SENSITIVITY 1 to 50mV/psi (Selectable). MAX PRESSURE 7,500psi. FREQUENCY RANGE 5Hz to 18KHz. ELECTRIAL ISOLATION Yes. CONNECTOR 6-Pin Connector. MOUNTING 1/4" NPT Male Thread. Details Self-Contained Measuring System ...more

SENSITIVITY 1200pc/psi. MAX PRESSURE 3,000psi. FREQUENCY RANGE 2Hz to 8KHz. ELECTRIAL ISOLATION Yes. CONNECTOR 10-32 Coaxial. MOUNTING 1" NPT Male Thread. Details Electrically Isolated ...more

SENSITIVITY 5mV/psi. MAX PRESSURE 3,000psi. FREQUENCY RANGE 1Hz to 15KHz. ELECTRIAL ISOLATION Yes. CONNECTOR 2 Pin MIL-C-5015. MOUNTING 7/8-14 UNF Straight Male Thread. Details High Temperature Sensor ...more

The J25LP-MB and L45LP-MB use a proprietary coating technology that delivers greater speed, sensitivity, scratch resistance and damage threshold than traditional black painted detectors. Large-Area High Damage Energy Sensors ...more

The 275HP is a high voltage proximity detector. It has eight voltage detection settings from 240VAC to275kVAC. The 275HP consists of an internal pickup sensor plate, a sensitivity selector, a visual and a sound annunciator. ...more

High-Sensitivity Semiconductor Sensors (to 50 mW).LM-2 and OP-2 Series Semiconductor Sensors offer four detector choices, a silicon sensor for 400-1064 nm (VIS), a UV-enhanced silicon sensor for 250-400 nm (UV) and a germanium sensor for 800-1800 nm in the infrared (IR). ...more

This hand-held, binocular-type EO/IR system provides consistent, high contrast imagery independent of lighting conditions and obscurants such as smoke, light fog and haze. Operators of the MilCAM Recon® III multi-sensor can toggle between daylight and thermal imagers or display the IR and TV images in a split-screen mode. This is the only system of ...more

SENSITIVITY 9pC/psi. MAX PRESSURE 10,000psi. FREQUENCY RANGE 2Hz to 10KHz. ELECTRIAL ISOLATION No. CONNECTOR 10-32 Coaxial. MOUNTING 1/8" NPT Male Thread. Details High Pressure Sensor ...more

SENSITIVITY 2100pc/psi. MAX PRESSURE 3,000psi. FREQUENCY RANGE 2Hz to 8KHz. ELECTRIAL ISOLATION Yes. CONNECTOR 10-32 Coaxial. MOUNTING 1.125-12 UNF -2A Straight Thread. Details Vibration Compensated ...more

High-Sensitivity Semiconductor Sensors (to 50 mW). LM-2 and OP-2 Series Semiconductor Sensors offer four detector choices, a silicon sensor for 400-1064 nm (VIS), a UV-enhanced silicon sensor for 250-400 nm (UV) and a germanium sensor for 800-1800 nm in the infrared (IR). ...more

SENSITIVITY 48mV/psi. MAX PRESSURE 8,000psi. FREQUENCY RANGE 2Hz to 18KHz. ELECTRIAL ISOLATION Yes. CONNECTOR 2 Pin MIL-C-5015. MOUNTING 1/4-18 UNF NPT Male Thread. Details Wide Frequency Response ...more

SENSITIVITY 25pC/psi. MAX PRESSURE 5,000psi. FREQUENCY RANGE 2Hz to 10KHz. ELECTRIAL ISOLATION No. CONNECTOR 10-32 Coaxial. MOUNTING 1/2" NPT Male Thread. Details High Pressure Sensor ...more

High-Sensitivity Semiconductor Sensors (to 50 mW).LM-2 and OP-2 Series Semiconductor Sensors offer four detector choices, a silicon sensor for 400-1064 nm (VIS), a UV-enhanced silicon sensor for 250-400 nm (UV) and a germanium sensor for 800-1800 nm in the infrared (IR). ...more

Best known current-imaging method for non-destructive, non-invasive measurements in nano- and microelectronic components, ICs, advanced packages, and full assemblies. Magnetic current imaging platform based on an ultra high sensitivity SQUID sensor for fault isolation in advanced packaged devices and full assemblies. ...more

The NR series sheathed resistance thermometers are the high performance resistance thermometers with high sensitivity, solidity, and durability required in a general industrial sensor. The thermometer is constructed by densely filling the gap between a protective tube and a resistance thermometer element with magnesium oxide. The thermometer h ...more

The NC series solidpak thermocouples are the high performance thermocouples that feature high sensitivity, solidity, and durability required in a general industrial sensor. The gap between a protective tube and a thermocouple wire is densely filled with magnesium oxide. The thick protective tube provides excellent response along with vibration ...more

High-Sensitivity Semiconductor Sensors (to 50 mW).LM-2 and OP-2 Series Semiconductor Sensors offer four detector choices, a silicon sensor for 400-1064 nm (VIS), a UV-enhanced silicon sensor for 250-400 nm (UV) and a germanium sensor for 800-1800 nm in the infrared (IR). ...more