|Sponsor Your Products|
SV-D1T - Headlight Tester(Manual) SV-D1T headlight tester (hereinafter referred to as "tester"), boasts the advantages of accuracy measurement and simple installation, is used to detect the luminous intensity and the illuminating position (or the axis deviation).It is suitable for the auto manufacturer, vehicle repair unit and environmental- protection department.
ZJ-2 - Manual Headlight Tester ZJ-2 Manual Headlight Tester is the instrument for automatically testing headlight’s light intensity and radiation direction.
HLT-800D-1 / KHL-120 - Headlight Tester It is the method by measuring on vehicle's headlight in the front of 1M or 3M. The headlamp is maintained automatically according to the image processing method of ramp pattern by using CCD camera. And it is measured the intensity of light and the optical axis. Also, the equipment is measurable the high-beam and low-beam.
12510442616 - AUTOMATIC HEADLIGHT TESTER Two headlight testers measure the headlights simultaneously on one testing line so that the testing speed can be raised. Use two special cameras (CCD) to collect signal so that the high beam and low beam can be really reduced its image. The testing data can be given out promptly and accurately. Use a special image collecting card with high speed to digitize the image.
ZJ-1 - Intelligent & Automatic Headlight Tester ZJ-1 Intelligent and Automatic Headlight Tester is the one which automatically follows and test radiation direction of the light intensity and light brightness.
12510413816 - HEADLIGHT TESTER Simultaneous measurement of luminous intensity and deviation from optical axis. The advanced configuration optical system is used, and the characteristic of light distribution for headlight under test can be shown in the screen.
12510431416 - CALIBRATER FOR HEADLIGHT TESTER Good stability and long life. Dual stabilized power, less power pulsation, light in weight and high efficiency. It is operated easily and conveniently, and calibrated quickly.
122211405916 - LOW BEAM CALIBRATER FOR HEADLIGHT TESTER FDJ-3 is one of the essential metrical instruments for the technical testing department of vehicle safety to calibrate headlight tester. It is used to calibrate the indication value of low beam optical axis deviation in the headlight tester.
ZJ-1A - Headlight Tester ZJ-1A Headlight Tester for High and Low Beams is the instrument for testing many kinds of parameters such as light intensity, offset of low beam, light intensity of dark area in low beam and headlight brightness.
12510382616 - HIGH / LOW BEAM CALIBRATER FOR HEADLIGHT TESTER It adopts the imported vacuum seal type bulb and the reference laser as the standard light source with good stability and long life. I adopts the dual stabilized power with less fluctuation. It is light in weight and high in efficiency. It is simple in operation and quick in calibration.
VLT 0936/MK2 - Automated Headlight Tester Fully computerized controlled CCD Head-light Beam Tester, with fully automated vertical and horizontal movements, with automated searching of the hot spot of the beam. This robot type Headlight Beam Tester is connected to the Vehicle Test Lane Computer system and displays instructions and results to one of the large overhead SVGA monitors of the Test Lane.
SV-D2T - Headlight Tester(Electric) SV-D2T –Headlight Tester (hereinafter referred to as "tester"), boasts the advantages of accuracy measurement, simple installation and control the upward-downward by electronic, is used to detect the luminous intensity and the illuminating position (or the axis deviation).It is suitable for the auto manufacturer,vehicle repair unit and environmental- protection department.
VLT 0938/MK2 - Automated Headlight Tester Unique new revolution of Headlight Beam Testing with our VLT patent pending vehicle position scanner system. This model has a fully computerized controlled CCD camera, has the same fully automated vertical and horizontal movements including automated searching of the hot spot of the beam as our VLT 0936, but scans the vehicle and measures the center line of the testing vehicle and makes adjustment of the measuring device if the angle is not the same.
12510401416 - AUTOMATIC HIGH/LOW BEAM HEADLIGHT TESTER With advanced CCD structure, it is able to test the deviation angle and the luminous intensity of high/low beam. The measurement and adjustment both are accomplished by computer software without adjusting any potentiometers. It only takes 10 minutes to finish the whole test process. Built-in advanced microprocessor, and externally equipped with high performance Industrial Control Computer (ICC) for testing and controlling.
LITE 1 / LITE 1.1 - Headlight Tester Exact and rapid testing of the headlight image
High quality, stable construction
Optimum precision during measurement due to use of an aluminium profile column
Various country variants are available
VLT 0939 - Manual Model for Integrated use in VLT Test Lanes Manual Headlight Beam Tester with Same measuring Techniques as our Fully Automated models. This Manual operated model for use in VLT Test Lanes, with cable boom connection to the Test lane Computer. Including rechargeable battery pack and charge.
VLT 0939TL01 - Manual Model for Integrated use in VLT Test Lanes Manual Headlight Beam Tester with Same measuring Techniques as our Fully Automated models. This Manual operated model for use in VLT Test Lanes, with cable boom connection to the Test lane Computer. Including rechargeable battery pack and charge.
CTS42V - Tester, Circuit Quickly finds broken wires, blown fuses, bad switches and more. •Microprocessor controlled current loading capability for a TRUE test of powers and grounds. •Unit features all the advantages of an incandescent Test Light while being computer and air bag safe. •Super bright LED headlamp for working under dash, under hood or behind door panels. •Dual audible tone and bicolor LED indicate power, ground or open circuits. •42 Volt hybrid compatible. •Includes 4" probe extension, screw-on alligator clip, banana plug and storage case.
Turning Radius Tester This tester can measure the turning angle of the front wheel and adjust the turning radius. It is alsoutilized for the Equalizer in front of headlight tester. It consists of main body, rear wheel equalizer, control panel, process indicator, and operation panel.
VLT 0939TL02RF - Advanced Manual Model for Integrated use in VLT Test Lanes Manual Headlight Beam Tester with Same measuring Techniques as our Fully Automated models. This Manual operated model for use in VLT Test Lanes. This model comes with RF (Radio Frequency) communication with the Test Lane Computer. Including extend Battery pack and battery charger (charging over night) .
Results 1 - 20 of 20
- Beam (11)
- Brightness (2)
- Cable Testers (2)
- Calibrators (3)
- Cameras (3)
- Computer (6)
- Control (3)
- Environmental Test (2)
- Image (3)
- Instruments (3)
- Line (2)
- Luminous Intensity (4)
- Measurement (3)
- Optical (3)
- Power (3)
- Power Testers (3)
- Radiation (2)
- Repair (2)
- Testing (7)
- Vehicle (6)
- »See All 71 Features