Gauges - aka Gages

Sponsor Your Products
  • Accu-Cal Plus - Digital Test Gauge The Accu-Cal Plus Digital Test Gauge from 3D Instruments incorporates the ultimate in pressure measurement technology to address the calibration requirements of current process monitoring and control instrumentation. The Accu-Cal Plus combines the accuracy of digital technology with the simplicity of an analog gauge and achieves performance, ease-of-use and a feature set unmatched in the pressure measurement world!
    3D Instruments
  • Series A - Standard Test Pressure Gauge D. 60 mm Range: - 10 ? 200 bar - 200 ? 2000 psi - 10 ? 200 kg/cm2 Uncertainty: 0,25%
    Scandura & FEM S.r.l.
  • 1082 - Test Gauges, ASME B40.1 Grade 3A The standard Ashcroft® test gauge case style features a solid-front aluminum case with a hinged ring. The dial has a polished mirror band for pointer reflection to prevent parallax error and is available in 4.5", 6" and 8.5" dial sizes in both lower and back connection. Pointer is a balanced-friction adjustable design with red knife -edge tip for easy reading.
    Ashcroft
  • Precision Test Gauge The best Precision Test Gauge for your high accuracy test/calibration requirements. The 3D Instruments Precision Test Gauge is certified for industrial and laboratory pressure transfer measurement in the U.S. and worldwide. Incorporating 3D Instruments' well known expertise in test gauge design and application, the Precision Test Gauge provides unsurpassed long term accuracy.
    3D Instruments
  • HLT Truck & Transport Classic II - Hall's Trailer Light Testers The Hall’s Truck & Trailer Classic II Is A Superior Air Brake & Electrical Diagnostic Tool Which Greatly Reduces Inspection Time. The Only Tester that is built from Heavy Gauge Metal,75 Amp Switches,10 & 12 Gauge Wiring, Circuit Protected, Heavy Flexible Rubber D.O.T. Air Lines, and Built to Last a Lifetime & Never Leave Your Shop for Repair. Remote Control on Air Brake Tests
    HALL'S Instrumentation
  • 3385 - Universal Gauge and Component This is the fast way to pinpoint problems in fuel, oil, temperature, and vacuum electrical gauges. This tester includes a test light and switch to also test instrument voltage regulators on Ford vehicles and the GM Spectrum, Sprint, and Nova. You can use it as an instrument gauge tester by attaching the alligator clips to sensors and wiring harnesses on a variety of vehicles. Included is an instrument gauge application data sheet listing resistance set points for GM, Ford, Chrysler, Toyota, Nissan, VW, Mack, Navistar, and John Deere.
    OTC
  • M5-2-COF - COEFFICIENT OF FRICTION GAUGE The M5-2-COF coefficient of friction (COF) gauge is an integral part of a COF testing system, typically including a motorized test stand and COF fixture. With a capacity of 2 lbF [10 N], the gauge can be used to measure friction for a wide range of materials, ideal for conformance to ASTM D1894 and other relevant standards. Static and kinetic coefficients are displayed on the backlit LCD, and are calculated from a user-programmable sled weight.
    Mark-10
  • SERIES TT03 - torque gauges & TORQUE TESTERS Data Sheet User's Guide Series TT03 digital torque gauges are designed for clockwise and counter-clockwise torque testing applications in virtually every industry, with capacities from 10 ozFin to 100 lbFin (7 to 1,150 Ncm). A dedicated remote torque sensor with Jacobs chuck can be used to grip a sample, bit, or fixture. The gauges' rugged aluminum housing allows for hand-held use or test stand mounting for more sophisticated testing requirements.
    Mark-10
  • Series 5 - Digital FORCE GAUGEs Series 5 advanced digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 1,000 lb (0.5 N to 5,000 N). The gauges feature an industry-leading sampling rate of 7,000 Hz, producing accurate results even for quick-action tests. Accuracy is ±0.1% of full scale ±1 digit, and resolution is 1/5000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges' many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.
    Mark-10
  • 34650 - Power Steering Tester in Storage Case Gives fast, accurate power steering analysis. Test for defects in power steering pumps, gears and lines. Large heavy duty gage reads from 0-2,000 PSI and 0-140 BAR. Use to rule out power steering problems before expensive suspension or steering linkage problem is attacked. Includes 13 adapters. Supplied with instructions in a durable, plastic molded storage case.
    S & G Tool Aid
  • 33980 - Fuel Injection Pressure Tester with 2 Gages in Case Test gasoline fuel pump pressure on most domestic and imported fuel injection equipped vehicles. Kit contains adapters to test all GM vehicles with multi-port and some throttle body injection (TBI). Test all Chrysler cars with multi-port turbos and some TBI. Use on most Ford TBI systems equipped with or without small Schrader test valve. Test all Ford vehicles with multi-port fuel injection systems.
    S & G Tool Aid
  • 33600 - Exhaust Back Pressure Tester Use to test for clogged or obstructed catalytic converters and mufflers. Fast and easy to use - threads into Oxygen Sensor Port. Includes 12mm and 18mm adapters to fit most domestic and imported vehicles. Gage measures 2 1/2" diameter and has dual scale: 15 PSI and 1.00 Kg/Cm2. Hose is 41" long.
    S & G Tool Aid
  • Series MG - FORCE GAUGEs The Series MG Digital Force Gauge is an economical solution for push and pull testing of up to 500 lb. A rugged reversible aluminum housing allows for hand-held use or test stand mounting. Three pushbuttons allow the user to easily select units of measurement, reset zero, and recall tensile and compressive peak loads. Use the MG with a test stand and gripping fixtures to create a complete testing solution.
    Mark-10
  • 53900 - Fuel Injection Pressure Tester with Quick Couplers Quick couplers provide for fast and easy hook-up. Kit contains adapters to test all GM vehicles with Multi-port and some Throttle Body Injection (TBI). Tests all Chrysler cars with Multi-port turbos and some TBI. Use on Ford older TBI systems not equipped with small Schrader test valve. Includes Large Gage with hang-up hook calibrated from 1-100 PSI (0-7.0 BAR). Supplied with instructions in a vinyl pouch.
    S & G Tool Aid
  • 3640 - Fuel Injection Pressure Tester * Large, easy-to-read 2 ½" dial face with 0-100 PSI scale * Durable 16" gauge hose and 6-foot bleed-off hose with solid brass fittings * Includes Ford, GM and Chrysler test adapters and a "Tee" adapter for import vehicles * Helps identify and diagnose low fuel pressure, a faulty fuel pressure regulator, leaking injector(s), fuel leaks and/or clogged fuel filters.
    Equus Products
  • 42160 - Gas Manifold Pressure Test Kits Use these handy kits to Measure Natural gas or LP gas pressure across appliance manifolds Test gas stoves, furnaces, dryers and other gas appliances Economical and accurate – easier to use than a manometer Manifold Pressure Test Kit, Pressure measurements from 0 – 35" of water column Diaphragm gauge is calibrated in inches of water column, also shows ounces per square inch Includes fitting for quick connection to the appliance manifold Packed in high impact plastic case for protection during transit and use
    TIF
  • 42162 - Gas Manifold Pressure Test Kits Use these handy kits to Measure Natural gas or LP gas pressure across appliance manifolds Test gas stoves, furnaces, dryers and other gas appliances Economical and accurate – easier to use than a manometer Manifold Pressure Test Kit, Pressure measurements from 0 – 10" of water column Diaphragm gauge is calibrated in inches of water column, also shows ounces per square inch Includes fitting for quick connection to the appliance manifold Packed in high impact plastic case for protection during transit and use
    TIF
  • #8029 - 7 Round Pin Tractor Trailer Circuit Checker / Maintenance Kit Test, clean and restore 7 round pin connections. Tester will verify tow vehicle is sending proper signal to the connector, while cleaning tools remove corrosion and verify proper pin size on both male and female truck/trailer plugs. For use with 7 round connectors. • Tests tractor electrical circuits • Removes corrosion from truck and trailer connectors • Enhances electrical contact points • Extends harness life • Use as a pin wear gauge Patented Kit Includes: #7865L: 7 Round Pin Tractor Trailer Circuit Checker, #8024: 7 Round Pin Cleaner, and #8030: 2 ml DeoxIT® Cleaner
    Innovative Products
  • 840099 - Datalogging Manometer 15 PSI Automatically log up to 12,000 readings with date and time stamps and download them to your computer or manually record and review 99 readings on the meter's display. Features a user friendly menu, backlit dot matrix display, auto power off and a tripod screw. This portable meter is ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals. Reads gauge and differential pressure in 11 units of measure. Comes in a hard shell carrying case complete with 4 standard AAA batteries, pressure connection hose, instructions, computer cable and software. N.I.S.T. traceable certificate of calibration available
    Sper Scientific
  • 840098 - Datalogging Manometer 2 PSI - Automatically log up to 12,000 readings with date and time stamps and download them to your computer or manually record and review 99 readings on the meter's display. Features a user friendly menu, backlit dot matrix display, auto power off and a tripod screw. This portable meter is ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals. Reads gauge and differential pressure in 11 units of measure. Comes in a hard shell carrying case complete with 4 standard AAA batteries, pressure connection hose, instructions, computer cable and software. N.I.S.T. traceable certificate of calibration available
    Sper Scientific
  • 840086 - Datalogging Manometer 5 PSI Automatically log up to 12,000 pressure readings with date and time stamps and download them to your computer or manually record and review 99 readings on the meter's display. Features a user friendly menu, backlit dot matrix display, auto power off and a tripod screw. This portable meter is ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals. Reads gauge and differential pressure in 11 units of measure. Comes in a hard shell carrying case complete with 4 standard AAA batteries, pressure connection hose, instructions, computer cable and software. N.I.S.T. traceable certificate of calibration available.
    Sper Scientific
  • 840080 - Manometer 5 PSI Sper Scientific Manometers are ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals. Portable, and weighing only 5 oz (150 g) including the battery, these manometers are convenient for use in the lab, field or factory. Five models are available covering a wide range. All read gauge, and differential pressure in up to 11 units of measure and feature large backlight display, min/max, hold, and auto power off functions. The RS232 port enables communication with a computer. High accuracy of ±0.3% fs at 25ºC, repeatability: ±0.2% (max ±0.5%) FSO, and combined linearity and hysteresis: ±0.2 (Max ±1.0%) FSO. All Sper Scientific Manometers come ready to use with connection hose, instructions, and a 9V battery, in a hard shell carrying case. N.I.S.T. traceable certificate of calibration available.
    Sper Scientific
  • 840081 - Manometer 15 PSI Ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals. Portable, and weighing only 5 oz (150 g) including the battery, these meters are convenient for use in the lab, field or factory. Five models are available covering a wide range. All read gauge, and differential pressure in up to 11 units of measure and feature large backlight display, min/max, hold, and auto power off functions. The RS232 port enables communication with a computer. High accuracy of ±0.3% fs at 25ºC, repeatability: ±0.2% (max ±0.5%) FSO, and combined linearity and hysteresis: ±0.2 (Max ±1.0%) FSO. All Sper Scientific Manometers come ready to use with connection hose, instructions, and a 9V battery, in a hard shell carrying case. N.I.S.T. traceable certificate of calibration available.
    Sper Scientific
  • 840083 - Manometer 100 PSI Ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals. Portable, and weighing only 5 oz (150 g) including the battery, these meters are convenient for use in the lab, field or factory. Five models are available covering a wide range. All read gauge, and differential pressure in up to 11 units of measure and feature large backlight display, min/max, hold, and auto power off functions. The RS232 port enables communication with a computer. High accuracy of ±0.3% fs at 25ºC, repeatability: ±0.2% (max ±0.5%) FSO, and combined linearity and hysteresis: ±0.2 (Max ±1.0%) FSO. All Sper Scientific Manometers come ready to use with connection hose, instructions, and a 9V battery, in a hard shell carrying case. N.I.S.T. traceable certificate of calibration available.
    Sper Scientific

Results 1 - 24 of 48