Flash

The 866B is a universal device programmer with a constantly updated extensive device library. It has been designed for ease of use and reliable performance and it is ideal for use with Laptop/Notebook computers that do not have parallel port interfaces. Whether you are working with PLCC, SOIC, TSOP, DIP, TQFP, SSOP, PSOP or QFP, B+K Precision has a ...more

The model 2542 dual channel Digital Storage Oscilloscope delivers an unmatched combination of performance and value. Analog style controls combined with an Auto measurement function make this oscilloscope easy to use. Advanced features such as FFT function, digital filtering, waveform recorder, delayed sweep/zoom, mask testing and automatic measure ...more

onTAP provides comprehensive boundary-scan test development tools with powerful run time software including pin-level diagnostics. onTAP provides everything required for robust JTAG test solutions. Robust ATPG for high fault coverage and precise pin-level diagnostics. Interconnect, Bus Wire, Pull-up/Pull-down, TAP Infrastructure tests, Shorts ...more

The model 2540 dual channel Digital Storage Oscilloscope delivers an unmatched combination of performance and value. Analog style controls combined with an Auto measurement function make this oscilloscope easy to use. Advanced features such as FFT function, digital filtering, waveform recorder, delayed sweep/zoom, mask testing and automatic measure ...more

The model 2534 dual channel Digital Storage Oscilloscope delivers an unmatched combination of performance and value. Analog style controls combined with an Auto measurement function make this oscilloscope easy to use. Advanced features such as FFT function, digital filtering, waveform recorder, delayed sweep/zoom, mask testing and automatic measure ...more

GAO S3CEB2410 ARM Evaluation Board is a development platform based on Samsung?s S3C2410X processor. The S3C2410X consists of a 16/32-bit RISC (ARM920T) CPU core, a 16KB instruction cache, a 16KB data cache, MMU to handle virtual memory management, an LCD controller (STN & TFT), a NAND flash boot loader, System Manager (chip select logic an ...more

Applications: Debug hardware, Debug software, Flash programming. Hardware Features: Supports TI DSP and Microcontrollers with JTAG interface (C2xx, C24x, F240x, F28xx, VC33, C4x, C5x, C54xx, C55xx, C6xxx, C64xx, TMS470, OMAP). Compatible with XDS510 from TI Operates with parallel port on PC or laptop, no internal adapter required. ...more

On-board TMS320F2812 DSP, 32-bit fix-point Flash DSP, operating at 150Mhz. 128K*16 bits on-chip Flash program memory, Flash encryptable. 18K*16 bits on-chip SRAM. 64K*16 bits extended SRAM as program/data RAM (upgradable to 512K*16 bits). 2Kbit serial EEprom. 10M Ethernet interface, compatible with NE2000. LCD interface(driver compatible with ...more

GAO ARM Flash Programmer is designed to program the flash chip which is based on ARM7 and ARM9 processors. The ARM Flash Programmer can be purchased as a part of GAO IDE Package for ARM development, or as an individual software for your flash programming. Attention: JTAG cable is not included if you purchase the flash programmer ONLY. ...more

ARM Processor Card Mini2410-II: The GaoTek Mini2410-II processor card is another processor card based on Samsung's S3C2410 processor. It has a super tiny design measuring only 58mm by 36mm. The memory system of the board is mainly including. 32M SDRAM and 64M Nand Flash. The processor card extends the basic features of S3C2410. Other periphera ...more

90MHz 32-bit Motorola Coldfire M5307 CPU, with a processing capacity of 75 MIPS; 16MB SDRAM, 2MB Flash Memory; One 10M Ethernet 10BASET Interface (RJ45), two Asynchronous Serial-ports (UART), one I2C Bus Interface, Real-time Clock, Watchdog Timer Hardware, Four-channel DMA and Dual 16-bit Timers; Two 84-line connectors connecting almost all da ...more

VP480 Universal Programmer Features: Dimensions: 168×108×26mm, weight: 300g 48 Pin ZIF socket with universal pin-drivers. Supports more than 16000+ devices Interface with any laptop, PC, PS/2 or compatibles through USB port. Accepts standard file formats: JEDEC, INTEL (Extended) HEX, Motorola S record Manages 16 and 32-bit word split (Set Prog ...more

GAO USB Universal Device Programmer supports from 4000+ to 22000+ devices to meet your different needs for device programming or IC testing. Check out the device support list of our universal programmer to match the chip you want to program or the adapter you may need. ...more

GAO PXA270 XScale Development Board is based on Intel?s XScale PXA270 processor. There is CPU, 128MB SDRAM, 64 MB Flash, 1 10/100M Ethernet interface, 1 MMC interface, 1 PCMCIA interface, 1 audio I/O, 1 320x240 TFT LCD interface, TOUCH, CPLD programmable, 1 JTAG interface and 1 bus. Users have the freedom to develop the board with their own ap ...more

GAO USB Universal Device Programmer supports from 4000+ to 22000+ devices to meet your different needs for device programming or IC testing. Check out the device support list of our universal programmer to match the chip you want to program or the adapter you may need. ...more

ARM Single Board Computer:SBC2410-II. The SBC2410-II is a full-featured single board computer (SBC) using the Samsung S3C2410A processor with most controller interfaces such as Ethernet, USB, RS232, LCD, Keyboard, Jtag, SD/MMC, etc . The board has rich software resource, providing with Linux2.4/2.6 and WinCE4.2/5.0 BSP and is designed combinin ...more

There's no faster way to measure and compare peak kV, or verify the proper firing of the secondary ingnition system, than with the kV/Arc Quick Probe. The kV/Arc Quick Probe is easy to use ? simply place the probe over the ignition wire. Each time the unit detects a spark firing, it will flash the Super Bright LED strobe indicating a spark-firi ...more

his hard working timing light is accurate up to 8,000 RPM. An extremely bright flash will help you time the engine. The break and shock resistant plastic housing, reduces damage from accidental drops. ...more

Gives a Visual Check of the Ignition System. Quickly diagnose problems with all ignition systems. Connect the tool between the spark plug and the plug wire. The tool is double-ended to offer a straight boot and a 90° boot on one tool. With the engine running, the tool flashes a mirror image of ignition spark. ...more

Tests Spark Plugs, Spark Plug Wires and Coils Without Puncturing the Wire. With the engine running, place the grooved end of the tool over the plug wire. The bulb will flash to indicate spark. ...more

Includes the OTC Tech 2 Flash, vehicle power cables, CANdi module, vehicle adapters, and 32 MB ’92–’06 GM PC diagnostic card. Packed in a heavy-duty storage case. ...more

Advance Timing Light allows accurate adjustment of base and advance timing reading. Adjustable knob measures centrifugal, vacuum and computer advance. All metal inductive pickup. Super bright Xenon flash ...more

Spot & Incident Light Readings Under Flash and/or Ambient Lighting Conditions Calibrated to match the Sensitivity of Your Camera?s Imaging Sensor. ...more

Here is the ultimate Maintenance Monitor:  SenDEC's top quality DC Hour meter (8V-32V input) with Flash Alerts, along with a Service Lamp that lights when Service is Due!  The lamp provided is an LED Lamp module that can be easily mounted anywhere on your equipment!    ...more

SenDEC panel mounted, DC hour meters (8V-32V input) are self-powered, keeping total run hours displayed at all times.  These meters are also available with SenDEC Flash Alert which flashes the required maintenance at OEM selected intervals.  Epoxy encapsulation protects these meters from shock and vibration and seals out the harshest environmen ...more