FPGA

GaGe's new eXpert on-board signal averaging technology allows users to detect a small repetitive signal in a noisy environment. This powerful new signal averaging capability takes advantage of GaGe's on-board FPGA technology and allows rapid signal averaging with absolutely no CPU loading. Using signal-averaging, small signals can be extracted ...more

The Phoenix VPF2 is a high performance heterogenous processing engine coupling a dual Power Architecture MPC8641D with two latest generation Xilinx Virtex-5 FPGAs. With its combination of high performance CPU and latest generation twin FPGAs, this DSP product provides leading edge performance with flexible high-bandwidth I/O. This VXS board is ...more

The AD3000 is a Xilinx Virtex-5 FPGA closely coupled to a high-speed analog input front end providing both processing and acquisition in a single XMC/PMC card. A Virtex-5 SXT or LXT FPGA is used to control the analog to digital converter and provides the off-board digital interfaces of PCI-X and the multi-Gbit serial I/O used for the XMC inter ...more

The PMC-FPGA05 is a Xilinx Virtex-5 XC5VLX110 platform FPGA based, PMC module with high speed digital I/O and PCI-X interface to the host computer. The PMC-FPGA05 is aimed at embedded application development. ...more

This FPGA+Linux Board employs the low cost Spartan-3 FPGA, with the MicroBlaze soft processor as the CPU core. The provided operating system environment is based on uClinux. Linux (uClinux 2.4) is employed as the standard operating system, offering proven stability and access to rich software resources. With Xilinx's FPGA (Spartan-3), various ...more

This FPGA+Linux Board employs the proven high performer Virtex-II Pro FPGA, with the PowerPC 405 as the CPU core. Linux is provided as the standard operating system environment. Linux (kernel 2.4) is employed as the standard operating system, offering proven stability and access to rich software resources. ...more

As a next generation platform, this FPGA + Linux Board provides an excellent embedded solution combining FPGA and Linux. Linux Ready - supports Linux (Kernel: uCLinux 2.4.x) as default operating system. Linux provides a mature code base and rich software support. Stable ISA - software processor core abstract underneath hardware. Software will ...more

The FAC is a plug-and-play IP solution for processor (Micro-controller, DSP or CPU), FPGA Users and ASIC/SoC designers who need to respond to customer demands for better Design-for-Test and improved support for programming external FLASH in a production environment.  The Fast Access Controller is covered by US Patent #6,594,802 and Canada paten ...more

The NI LabVIEW Reconfigurable I/O Software Development Kit includes all of the tools you need for building an embedded, customized CompactRIO system -- LabVIEW FPGA for synthesizing custom hardware in the user-configurable reconfigurable I/O FPGA core and LabVIEW Real-Time for building deterministic real-time applications. The NI LabVIEW Reconfigur ...more

The LabVIEW FPGA Module course prepares you to design, debug and implement efficient, optimized applications using the LabVIEW FPGA Module and NI reconfigurable I/O (RIO) hardware. You learn how to deploy your VIs to a RIO target and how to control timing, synchronization, and priority of operations on the target. The course also discusses how to u ...more

Pulse Code Modulation (PCM) Commutator is specifically designed for transmitting PCM telemetry data. National Instruments reconfigurable I/O hardware and LabVIEW FPGA software are used to develop the PCM Commutator. This provides for various parameters of the communication stream to be customized based on specific application needs.  ...more

DDS Technology and FPGA Chip Design. Frequency Range:0.1Hz~4MHz. High Frequency Accuracy : ± 20ppm. High Frequency Stability : ± 20ppm. Frequency Resolution :100mHz. Low Distortion Sine Wave:-55dBc,0.1Hz~200kHz. Front Panel Setting Save/Recall with 10 Groups of Setting Memories  ...more

Reconfigurable Digital I/O Using the LabVIEW FPGA Module ...more

Reconfigurable Multifunction I/O Using the LabVIEW FPGA Module ...more

DDS Technology and FPGA Chip Design. Frequency Range:0.1Hz~7MHz. High Frequency Accuracy : ± 20ppm. High Frequency Stability : ± 20ppm. Frequency Resolution :100mHz  ...more

VibroDAQ - advanced measurement and diagnostic system - allows one- and two-plane balancing as well analysis of vibrations. It offers also field balancing without deassembling of the rotor what shorten standstill of the machine to the minimum. This fully digital instrument is adapted to work with PC. Its modern construction based on programmable F ...more

The WildPackets family of Gigabit Analyzer Cards (GAC) uses state-of-the-art hardware and FPGA technology to provide the high-performance analysis of Gigabit networks. The GAC collects, classifies, and merges data in real time at 100% line rate- under all network traffic conditions. ...more

The ICX digital test interface VXI card is an intelligent digital interface capable of supporting development and validation testing. The ICX has on-board field programmable gate arrays (FPGAs) to support bus emulation, protocol simulation, test algorithm generation and other data conversion functions. The ICX VXI card supports 1-3 daughtercard mod ...more

The Fast-VIDEO2 is a performance frame grabber for analog signals. The board is capable of simultaneously digitizing two independent UXGA sources without multiplexing and four with multiplexing. The data can be processed in real-time using a Xilinx FPGA or the 440GP PowerPC processor. The output can either be an optional UXGA display RAMDAC an ...more

Reconfigurable Multifunction I/O Using the LabVIEW FPGA Module ...more

The NI LabVIEW FPGA Module extends LabVIEW graphical development to reconfigurable FPGAs on NI RIO hardware. With the LabVIEW FPGA Module, engineers create custom I/O measurement and control hardware without low-level hardware description languages or hardware board-level design. This hardware is used for unique timing and triggering routines, ultr ...more

The ICX digital test interface VXI card is an intelligent digital interface capable of supporting development and validation testing. The ICX has on-board field programmable gate arrays (FPGAs) to support bus emulation, protocol simulation, test algorithm generation and other data conversion functions. The ICX VXI card supports 1-3 daughtercard mod ...more

Gage?s new eXpert on-board FIR Filtering FPGA Technology is a powerful method for removing unwanted signal features (like noise) and emphasizing signal features of interest. Traditional analog filters are usually limited to rather simple filtering methods, such as low-pass filtering, high-pass filtering and band-pass filtering. Numerical filte ...more

DDS Technology and FPGA Chip Design. Frequency Range:0.1Hz~7MHz. High Frequency Accuracy : ± 20ppm. High Frequency Stability : ± 20ppm. Frequency Resolution :100mHz. Low Distortion Sine Wave:-55dBc,0.1Hz~200kHz  ...more

The ICX digital test interface VXI card is an intelligent digital interface capable of supporting development and validation testing. The ICX has on-board field programmable gate arrays (FPGAs) to support bus emulation, protocol simulation, test algorithm generation and other data conversion functions. The ICX VXI card supports 1-3 daughtercard mod ...more