Ethernet Switches

NuStreams 85M is a stand alone Ethernet switch tester for testing 2, 4, 5, or 8 ports of 10/100 Mbps at wire speed. This compact and light-weight design unit has built-in tests ideal for small production test runs or for field service. ...more

Validator-NT measures and presents fast and clear SPEED and PERFORMANCE CERTIFICATION results up to 1 gigabit. Speed certification assures the cabling will do the job it is rated to do. Network components such as switches, hubs, routers and systems will then operate at maximum efficiency. Wire maps up to 8 locations with the network remote identifi ...more

The recent growth in communication services has led to a convergence of data and voice networks, requiring multiple communications services from a single platform. The ZX4900P provides a fully redundant embedded Ethernet subsystem to control communications between PICMG 2.16 chassis devices. The ZX4900P with OpenArchitect provides OEMs with th ...more

NTS is capable of performing all the required tests in the latest versions of GR-63-CORE "NEBS Requirement: Physical Protection", GR-1089-CORE "EMC and Electrical Safety  GR for Criteria for Network Telecommunication Equipment", along with GR-487, GR-78, and Passive Fiber Optic Components requirements and understands t ...more

The ZX5000 is a 16-port AdvancedTCA Base Fabric switch based on the Intel IXE5416 switch silicon. Providing Gigabit Ethernet service for 12 payload slots, the ZX5000 uses the ZNYX Networks OpenArchitect 3 running on its embedded MPC8255 to provide complete and flexible switch management. Three switch egress ports are provided, and one port is ...more

INE Compact is a small form factor (book-size) embedded Windows appliance which can be used to replicate the network conditions applications are likely to encounter when running over WAN Networks from Windows, Unix or Linux based systems or online games consoles. It can work through switches or routers too ? in fact any Ethernet based environme ...more

The ZX4300P CompactPCI Ethernet 10/100 Mbps switch is the most cost-effective and flexible solution to Embedded CarrierClass Layer 2 switching requirements. ZNYX Networks' ZX4300P is the first switch designed to support the PICMG 2.16 specification for a CompactPCI Packet Switching Backplane (CPSB), but it can also be deployed in a standard Co ...more

OpenArchitect is an extensible open software platform for the routing, control and management of embedded Ethernet switches. The platform includes the Linux operating system, IP protocol stack, control applications and the OA Engine. By using OpenArchitect with CompactPCI embedded Ethernet switches, application integrators and OEMs can build p ...more

The Cisco MDS 9000 Port Analyzer Adapter enables effective, low-cost analysis of Fibre Channel traffic anywhere in the network at any time. The device is a standalone Fibre Channel-to-Ethernet adapter that allows for simple, non-disruptive, transparent analysis of Fibre Channel traffic in a switched fabric. ...more

The Geminus Platform from IneoQuest is a modular, scaleable, real-time Video over IP monitoring, analysis and test solution. Based on powerful FPGA technology the Geminus platform provides a complete solution for monitoring, maintaining and troubleshooting a switched IP network for streaming Video quality over Gigabit Ethernet and 10GE rates. B ...more

The ZX4500P with OpenArchitect is the most advanced and flexible embedded CompactPCI switch in the world. No other switch can match its state-of-the-art management software suite, featuring the latest Request For Comment (RFC) protocols and switching applications. No other switch can approach the High Availability features employed in the Open ...more

The Architect Model 961 sixteen channel amplifier offers discrete zone equalization controls plus an optional Ethernet port that allows designer/installers to monitor the status of various channels and perform channel switching and muting. In addition the Model 961 produces 60 watts per channel into all 16 channels, simultaneously, making this ...more

The Ballard AFDX family of products interfaces various computer platforms with Ethernet based aircraft data networks. They enable computers with PCI, cPCI, or PMC expansion slots to receive and transmit data over an Avionics Full Duplex Switched Ethernet (AFDX) network. ...more

AdvancedTCA is fast becoming the standard of choice for Carrier-class communication infrastructure. With mounting competitive pressures, OEMs are looking for ways to stay flexible in their design and yet address time-to-market with quicker products to market.  ...more

The recent growth in voice and data services has led to a convergence of data and voice networks, requiring multiple communications services from a single, tightly integrated platform. The ZNYX Networks ZX4920P Gigabit Ethernet switch is an integral building block to any PICMG 2.16 design, delivering Gigabit Ethernet service for up to 19 paylo ...more

Conforms to PICMG 2.16 specification. Moves data via switched Ethernet fabric (10/100/1000 Mbit/s). One (Star topology) or two (Dual Star) fabric slots versions available. ...more

Troubleshoot and document local or remote gigabit segments without leaving your desk. Network Instruments offers both Hardware and Software-based Probes to accommodate all network speeds and specific network configurations. Hardware-based Probes are specific to administrators that require wire-speed, full-duplex gigabit capture, analysis, tren ...more

Net-O2 ATTEST SwitchTester Functional Test Suites provide cost-effective, comprehensive Layer 2 bridging and IP protocol functional testing of Fast Ethernet and Gigabit Ethernet switches. ...more

pAXAS is a fully integrated portable Avionics Full Duplex Switched Ethernet (AFDX) Bus Analyzer & Simulation system with a Linux or Windows-based GUI supporting AFDX monitoring, recording, protocol error injection, dynamic parameter manipulation, and the complete simulation of AFDX End Systems (ES). ...more

BusTools/AFDX is a Windows XP/2000-based GUI application solution from Condor Engineering that establishes new levels of power, flexibility and ease-of-use for AFDX (Avionics Full Duplex Switched Ethernet) traffic monitoring, analysis and simulation. ...more

network monitor and protocol analyzer for Ethernet, Wireless 802.11b & 802.11a, Token Ring and FDDI. Observer provides metrics, capture and trending for both shared and switched network environments. Observer is a cost-effective, software-only, Microsoft Windows-based network monitoring and troubleshooting tool. Observer can monitor single ...more

The 60-750/751 is an LXI Microwave Switching platform controlled through an LXI compliant Ethernet connection. The matrix is available in a variety of configurations and frequencies up to 20GHz (60-751). The matrix is characterized for 50 ohm applications, for 75 ohm versions please consult your local sales representative. ...more

Net-O2 ATTEST SwitchTester Layer 2 Functional Test Suites provide cost-effective, comprehensive protocol coverage for testing Fast Ethernet and Gigabit Ethernet switches. The test suite performs functional testing of switches supporting STP, RSTP, VLAN, LACP and IGMP Snooping protocols. ...more

5MHz - 2,500MHz Input Range 4-Input Switching Capability Meets Sprint/NEXTEL Monitoring Requirements Competitively Priced for the BAS Relocation Project Serial and Ethernet Control ...more

The 60-750/751 is an LXI Microwave Switching platform controlled through an LXI compliant Ethernet connection. The matrix is available in a variety of configurations and frequencies up to 20GHz (60-751). The matrix is characterized for 50 ohm applications, for 75 ohm versions please consult your local sales representative. ...more