Ethernet

NuStreams 85M is a stand alone Ethernet switch tester for testing 2, 4, 5, or 8 ports of 10/100 Mbps at wire speed. This compact and light-weight design unit has built-in tests ideal for small production test runs or for field service. ...more

With Anue's CHASSIS, LINE CARD, and SOFTWARE LOAD building blocks, many different combination systems can be configured. For example, a Network Emulator can contain both Gigabit Ethernet and Fibre Channel Signal Delay and impairment capability, or SONET Signal Delay and Path Delay capability, etc. • WAN testing • VoIP network testing • Ether ...more

Anue GEM Advanced Ethernet Network Simulators are ideal for testing 10/100/Gigabit Ethernet or IP based networking solutions in a lab environment. Ethernet Network Simulators can reproduce the delay and impairments experienced by Ethernet signals across MANs and WANs regardless of the underlying transport mechanism. ...more

The Patch Test quickly tests Ethernet patch cables for continuity and common wiring standards such as Gigabit Ethernet, Fast Ethernet, and fast Ethernet Crossover. Remote testing of longer cables whose ends are not co-located can be accomplished by using a Smartronix Gigabit SuperLooper Loopback jack to test for Gigabit and Fast Ethernet cables in ...more

The Smartronix LinkUp? Ethernet Tester will provide the first response for troubleshooting network connectivity problems. The unit’s LEDs provide instant basic connection status. The LCD display allows more detailed link analysis through the menu system. Auto-negotiation capabilities can be scrolled through. Power-Over-Ethernet voltages can be read ...more

Power over Ethernet (PoE) Tester, connected to an RJ-45 outlet, tests the cabling infrastructure for the presence of power, either IEEE802.3af standard compliant or pre-standard. The PoE Tester identifies the existence and type of Power Sourcing Equipment (either Endspan or Midspan) in your network. ...more

The EM405-8 easily interfaces up to eight (8) VITA 12-1996 standard M-Modules to a typical Ethernet (LAN) network. The carrier allows the numerous functions available in the M-Module mezzanine format to be remotely located near the unit-under-test, easing many system integration issues. ...more

Toronto, ON - GAO Tek Inc. has released a series of small form factor pluggable optical transceivers (XFP), which are fully compatible with Extreme’s original products. XFP modules support 10 Gigabit Ethernet IEEE standard interfaces as 10GBASE-LR, 10GBASE-ER and10GBASE-SR. Since the introduction of 10 Gigabit Ethernet, there has been a steady inc ...more

GAO Tek Inc. Releases Juniper compatible XFPs Toronto, ON - GAO Tek Inc. has released a series of 100% Juniper compatible small form factor pluggable optical transceivers (XFPs). GAO’s XFP modules support 10 Gigabit Ethernet IEEE standard interfaces as 10GBASE-LR, 10GBASE-ER and 10GBASE-SR. There has been a steady increase in enterprise and serv ...more

The NIC is a scalable solution for verifying and qualifying the performance of today's multiprotocol global communications networks.With a flexible software/firmware-based architecture, the scalable NIC Plus combines in a single platform the multitude of traditional hardware-based test sets required to install, maintain, and monitor high-speed ...more

G-MXL-18 is a development system based on Motorola MC9328MXL (ARM920T) DragonBall microprocessor. It has the following main functions: Help customers understand ARM processors and embedded LINUX operating system as an educational aid for embedded systems; Provide a platform for application software development and a reference for MC9328MXL app ...more

90MHz 32-bit Motorola Coldfire M5307 CPU, with a processing capacity of 75 MIPS; 16MB SDRAM, 2MB Flash Memory; One 10M Ethernet 10BASET Interface (RJ45), two Asynchronous Serial-ports (UART), one I2C Bus Interface, Real-time Clock, Watchdog Timer Hardware, Four-channel DMA and Dual 16-bit Timers; Two 84-line connectors connecting almost all da ...more

8065 Ethernet-to-GPIB Bus Controller lets you control GPIB instruments over a company network or over the Internet. Works on IEEE-802.11 10/100 Mb networks. VXI-11.2 and VXI-11.3 compliant. Works with all operating systems, WIN32, Unix, Linux, Sun OS etc and does not require special drivers. Works with LabView and Agilent VEE. Includes VXI-11 ...more

The JackRABBIT is special loop-back plug that supports high volume testing of network boxes with densely populated RJ-45 connections. ...more

ProbeStar's innovative MDF Series (Mechanical Docking Fixtures), relieves Operator fatigue while increasing efficiency when testing high-port-density devices (such as DSL modems, Ethernet Routers and others). ...more

The SuperLooper™ Ethernet Loopback Jack and Plug quickly and easily checks the RX/TX pairs of 10/100base network cables, helping a network technician determine if a network signal exists or if there are broken or shorted wires within the cabling (See Specifications). It can be plugged directly into an Ethernet wall port or can be attached to the en ...more

The LinkCheck can be used to test for the presence and speed of standard RJ45 10Mb or 100Mb Ethernet connections. With the push of a button, the LinkCheck will indicate connection status using three easily readable LEDs located on the face of the device. ...more

The Gigabit SuperLooper quickly and easily checks the RX/TX pairs of 1000base network cables, helping a network technician determine if a network signal exists or if there are broken or shorted wires within the cabling (See Specifications). It can be plugged directly into an Ethernet wall port or can be attached to the end of a network patch cable. ...more

The 230A tests thin Ethernet (BNC), 10BaseT (UTP/STP), 100BaseTx, RJ45, TIA 568A, TIA 568B, and Token Ring cables within a few seconds. It detects miswiring, polarization, and continuity. The 230A also tests the ground of shielded twisted pair cables. With the remote unit, you can remotely test installed cable either from the wall plate or pat ...more

Anue XGEM Advance Ethernet Network Simulators are ideal for testing 10 Gigabit Ethernet or IP based networking solutions in a lab environment. Ethernet Network Simulators can reproduce the delay and impairments experienced by Ethernet signals across MANs and WANs regardless of the underlying transport mechanism. ...more

The Dual/Quad 10/100-TX Mb/s Ethernet Adapter provides up to four Ethernet connections over twisted pair media. Options are available for Front-Panel RJ45 accessibility, or Rear I/O accessibility via a VITA 36 PIM module. The card is built around Intel 82551ER Ethernet controllers that provide an integrated media access controller (MAC) and physica ...more

The LANMASTER 26 Link Tester provides LAN Installers and Maintainers a tool with the testing capability for Gigabit (1000baseTX) over copper, Fast Ethernet (100baseTX), Standard Ethernet (10baseT) links as well as VoIP/PoE detection.  ...more

LANtest Pro is a small hand held tester that enables the user to quickly read the status of Ethernet twisted pair cables. It test for fault such as open circuit, shorts, crossed pairs, reversed pairs and split pairs in seconds. The tone generator function can sends a signal through your installed cables and the probe can then trace to locate t ...more

LANtest Pro is a small hand held tester that enables the user to quickly read the status of Ethernet twisted pair cables. It test for fault such as open circuit, shorts, crossed pairs, reversed pairs and split pairs in seconds. The tone generator function can sends a signal through your installed cables and the probe can then trace to locate t ...more

The network cable tester is a small hand-held cable tester, which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables. Test for open circuits, shorts, miswires, reversals, and split pairs  ...more