Energy Meter Test

Single phase site energy meter test instrument type KP-P1001-A (without voltage and current source) is an ideal instrument to test all kind single phase energy meters accuracy below 1.0, especially for meters on site. During tests, the tested meter must be on load condition (that means the tested meter must be working). The instrument tests the ...more

ngle phase round energy meter test bench, type KP-S1024-B, is a special calibration equipment for testing Round (ANSI Socket type) energy meter and normal energy meter with bottom terminal block.  It is an ideal testing equipment for energy meter factory or R&D institute, especially for testing ANSI Socket type energy meters. All the testin ...more

Single-phase portable test bench,Type KP-P1001-C, is an ideal device to test all kind single-phase energy meters accuracy below 1.0. The equipment can generate single-phase voltage, current and all power factor. ...more

The type of LJR-15~50(25) of the heat energy gauge (including the hot water gauge) is designed by national conditions and international relevant technology; It is a economical and practical equipment in our country at present. The result that it is Signed by technology and used by many users to indicate , the products of our factory have a lot ...more

The HC 3100 is a new generation of advanced electronics intelligent instruments. Based on digital signal processing (DSP) technology, the HC 3100 is a multi-function precision power meter for three phase systems of 3 or 4 wires and single phase measurements ...more

Three-phase site energ meter test instrument KP-P3001-B (with current source) is an ideal device to test all kind three-phase energy meters accuracy below 0.2, especially for testing installed meters on site, the tested meter could be without load(not working). The equipment can generate suitable current and supply a dummy load to the tested m ...more

Three-phase portable energy meter test instrument type KP-P3001-C with current and voltage source is an ideal device to test all kind three-phase energy meters accuracy below 0.2. The equipment can generate 3-phase voltage, 3-phase current and any power factor signal, the standard meter inside the equipment is class 0.05. ...more

Three phase energy meter test bench, type KP-S3016-A, is a new generation, high precision calibration equipment to test three phase energy meters. It is an ideal testing equipment for energy meter factory or R&D institute. All the testing procedures can be automatically operated by PC or by Keyboard manually. ...more

Multi wavelength test. Adapters supporting different ports (FC,ST, SC). Absolute power test in unit of dBm or ¦ÌW. Relative power test in unit of dB. 100 groups memory & record management. Low power indication. Auto shut off to save energy. LCD with backlit display ...more

Single phase test bench, type KP-S1024, is a new generation, high precision energy meter calibration equipment.  It can test mechanical energy meter and electronic energy meter, in spite of open or closed test link (I-P link).  It is an ideal testing equipment for energy meter factory or R&D institute. All the testing procedures can be auto ...more

LCD display : It can simultaneously display with the parameters of voltage, current, power, power factor. On-line energy test : Use the photo pick up or pluse input to test the accuracy 1 or 2 of energy meters. Clamp CT : Current input use clamp CT, which can be set up for several kinds of measure, and it is very convenience and safety for fie ...more

Three phase closed I-P link energy meter test bench, type KP-S3016-B, is designed for testing three-phase energy meters, especially for testing Closed I-P Links three-phase energy meters. It is an ideal testing equipment for energy meter factory or R&D institute ...more

Measure the value of single or three phase parameters as voltage, current, frequency, energy, power factor etc. Vector diagram: Real time display for 3 phase voltage and current. Wiring: Capable of recognize 48 different kinds of basic wiring for 3P3W system. Harmonic analysis: Capable of 63 times harmonic analysis and test the distortion. Als ...more

Three-phase site energy meter test instrument type KP-P3001-A (without voltage and current source) is an ideal instrument to test all kind three-phase energy meters accuracy below 0.2, especially for meters on site. When we want test a meter errors, the tested meter must be on load condition (or we can say the tested meter must be working). The ...more

The Rotek Model 8100 is a precision source of AC voltage, current and phase angle used in the calibration and test of a wide range of electrical metering instrumentation. It has been designed to be nothing less than the ultimate electrical power calibration standard in both accuracy and flexibility. This single instrument replaces the complicated c ...more

Vasavi LCR Meter Ideal for automatic and fool proof testing of Toroidal coils, Energy meter CT's and Bobbins, Low Tan delta Power capacitors,  Vasavi LCR Meter for testing SMALL TRANSFORMERS like SMPS transformers, Telecom Transformers (HYBRID, POT CORE, RM-CORE), Pulse transformers etc ...more

Multi-Function System for Testing Substation Equipment. The T/3000 is a unique solution for all testing operations during commissioning and maintenance of substations. Testing can be performed on both relays of all types and on current and voltage transformers! The unit is also able to test energy meters and transducers. ...more

Six Digit KWh LCD Display (no multipliers). Displays L1 and L2 Power Readings. (Three Digits, Volts, Amps, KW) Remote C.T. Operated. RS 485 Modbus and Pulse Output, Plug in Terminals for Field Testing. LED Indicates Relay Operation ...more

The U.S.I.T. Automatic Calibration System automates the calibration procedure for any instrument presently calibrated manually using the Model 8000, Model 5000, Model 4800A and Series 800A. The U.S.I.T. software will control the Model 8000 via the IEEE-488 interface. All measurements are made using the Model 8000's optional, built in pulse counters ...more

The Model 880B is an amplifier which provides a current gain of 10 for use in high current calibration applications. It can be used as a stand alone amplifier to boost current from 1 to 10 ampere sources to the 10 to 100 ampere level. High, two-volt compliance allows for voltage losses in switches and connections, as well as in the ultimate loads, ...more

Ideal for automatic and fool proof testing of Toroidal coils, Energy meter CT's and Bobbins and Ratio Tester for any transformers in built with 8 Pin Scanner for Automatic testing of multi winding transformers. ...more

Six Digit KWh LCD Display (no multipliers). Displays L1 and L2 Power Readings. (Three Digits, Volts, Amps, KW) Remote C.T. Operated. RS 485 Modbus and Pulse Output, Plug in Terminals for Field Testing. LED Indicates Relay Operation ...more

Components: PL 60/1 ? single-phase electronic phantom load. PEWM 1/1 S ? single-phase energy standard class 0.1. EH 11 ? scanning head for reading the pulses (rotations) of the electricity meter ...more

SCR Elektroniks have developed a panel for calibration of Energy Meters with SOFTWARE CALIBRATION FACILITY. This is PC based, with latest micro controller technology for communication with METER UNDER TEST. The Blinking Rate of `LED' on MUT, which is proportional to the energy registered is compared with Reference standard pulses. ...more

The 440 RF/D is a highly sensitive, low energy, RF shielded survey meter suited for fast, accurate measurements of background and other low radiation levels. This unit is perfect for X-Radiation testing of products incorporating cathode ray tubes (i.e. televisions, monitors, etc...) to most safety standards. Also complies with U.S. Federal Gove ...more