|Sponsor Your Catalog|
ESA615 - Electrical Safety Analyzer The automated ESA615 performs all primary electrical safety tests, including mains (line) voltage, protective earth (ground wire) resistance, MAP (insulation) resistance, device current, and applied parts (patient leakage) tests. It also offers ECG simulation and point–to-point voltage, leakage, and resistance tests. The ESA615 is an all-in-one solution with a multimeter, electrical safety analyzer and ECG simulator in a single test instrument
950i - Hipot Electrical Safety Compliance Analyzer Vitrek has incorporated advanced DSP technology into the new 950i series to bring you the fastest, most capable, feature rich hipot testers available for a surprisingly low price. Vitrek’s new 950i Series combines high output power, with a wide range of AC & DC voltage outputs and extremely low leakage current measurement. Then we added a 4-wire milli-ohmmeter with dynamic range up to 100K ohms and an overlapping Tera-ohm class Insulation Resistance function. Top that off with an available 40 Amp Ground Bond capability and you’re just beginning to get a feel for what the new Vitrek 950i Series Hipot Testers can do for you.
7742 - Electrical Safety Compliance Analyzer Six most common safety tests (ACW,DCW,IR,GB,LLT and RUN TEST). All-in-one display screen with flexibility in veiwing test parameters and results. Date and Time Setting allows the operator to set calibration due date and alert
LKG 601 - Comprehensive Electrical Safety Analyzer The LKG 601, Electrical Safety Analyzer is an extremely easy to use portable Electrical Safety Analyzer designed specifically for testing non-ECG equipment. Ground resistance, leakage current, and instrument current test measurements are displayed on its large LCD.
Model 8204 - 4-in-1 Electrical Safety Compliance Analyzer OMNIA® II Model 8204 provides AC Hipot, DC Hipot, Insulation Resistance and Ground Bond / Continuity tests in a single DUT connection. An optional built-in 8 port scanner is available on the 8204. The 8204 comes standard with an USB/RS-232 interface but is also available with optional Ethernet or GPIB.
V4 - Hipot Electrical Safety Analyzer The new Vitrek V4 Hipot Electrical Safety Analyzer combines AC & DC Hipot with high current ground bond and insulation resistance testing, all in one feature rich, fully automated, easy to use instrument.
19032/19032-P - Electrical Safety Analyzer 5 In 1 (ACV/DCV/ IR/GB/LC Test) 500VA Power Rating Twin-Port function Open / Short Check(OSC)
Model 8257 - 7-in-1 500 VA Electrical Safety Compliance Analyzer OMNIA® II Model 8257 provides AC Hipot (500 VA), DC Hipot, Insulation Resistance, Ground Bond / Continuity, Functional Run, and Line Leakage tests in a single DUT connection. The 8257 also includes a built-in 500 VA AC Power source. This feature, unique to OMNIA II, makes Functional Run and Line Leakage testing more productive and efficient. It provides a true one box solution for Line Leakage testing.
OMNIA II - Electrical Safety Compliance Analyzers OMNIA II, our next generation of Electrical Safety Compliance Analyzers, was designed around the way you test. We understand that every testing application is unique and finding the right tester can be difficult. OMNIA II is a multi-function Electrical Safety Compliance Analyzer that provides you with customizable features and unmatched functionality!
19032 Series - Electrical Safety Analyzers All manufacturers have to solve the issues of error connection and test cable unconnected. Chroma's Guardian 19032 is equipped with up-to-date open/short check function (OSC) for products testing.
LKG 610 - Comprehensive Electrical Safety Analyer The LKG 610, Electrical Safety Analyzer is designed to test any piece of medical equipment. The full featured Electrical Safety Analyzer is microprocessor controlled and has a full compliment of ten leads. The LKG 610, Electrical Safety Analyzer measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current.
MULTI-PRO 2000 - Full Function Electrical Safety Analyer The MULTI-PRO 2000, Electrical Safety Tester is a micro-processor based, full function electrical safety analyzer with a built-in 12 lead ECG Simulator. The combination instrument is designed to test the electrical safety of all types of medical equipment by hospital and field service biomedical technicians. In addition, the built-in ECG Simulator allows performance testing of ECG equipment.
Electrical Safety Tester / The robust, fully automatic Electrical Safety Tester ST400 ensures fast testing cycles incl. documentation (backtracking of data – Traceability). In addition to that, the ST400 Electrical Safety Tester also disposes two USB- Interfaces, LAN, RS232 and digital, as well as analogue I/O ports. I/O tests are ideally used to automatically pilot external systems. The test procedure with an Electrical Safety Tester results as follows: Connect the testee (device under test), chose the settings for the test program (automatic barcode if provided), test and save test protocol. The Electrical Safety Analyzer can of course also be operated manually through a spin-press button, similar to GPS systems used in automobiles. The following operating modes are available: Manual, Remote RS232/USB, Digital and Ethernet. Each Electrical Safety Analyzer can be remote controlled through a comfortable testing software. The GOOD-BAD results will be saved automatically on your databank. Electrical Safety Analyzers will be delivered including a leakage current test in case the device needs to be used in accordance with the medical-technical norm EN 60601. The Electrical Safety Testers of the 60335 series are easy to integrate at the workplace and laboratory.
R7000 - Electrical Receptacle Analyzer The R7000 is an advanced device that will drastically simplify your electrical receptacle testing! It will enable compliance and promote safety while dramatically reducing time spent testing and generating required reports. An electrical receptacle is tested in a matter of seconds! Outlet test results are displayed as well as a notification of whether the results comply with safety standards. The substantially larger display enables you to view multiple results as you are testing
6100 Plus - Analyzers The Guardian 6100 Plus Electrical Safety Analyzer performs AC and DC hipot (hy-pot), insulation resistance, ground bond and leakage current measurements for a complete electrical safety testing solution. The built-in leakage current scanner provides up to 20A input current capability for functional run testing, and, in addition, the connections for earth, enclosure, patient and line leakage current testing to meet IEC 60601-1 compliance requirements
6000 Plus - Analyzers The Guardian 6000 Plus Electrical Safety Analyzer performs AC and DC hipot (hy-pot), insulation resistance, ground bond (continuity) measurements for a complete dielectric testing solution. A fully automated tester, the G6000 Plus performs both high voltage electrical safety tests including dielectric withstand and dielectric breakdown and high current ground bond tests in accordance with the requirements of UL 60950 and other product safety compliance standards.
Rigel 266 Plus - Medical Safety Analyzer The Rigel 266 Plus is a highly compact, easy-to-use medical electrical safety analyser, designed to test in accordance with IEC/EN 60601-1, MDA DB9801, and AS/NZ 3200.
Rigel 288 - Hand Held Safety Analyzer The Rigel 288 is the FIRST universal truly hand-held medical electrical safety tester to combine the features of an automatic / manual tester with a data logging / asset management facility. In addition to IEC 60601-1 and AAMI / NFPA 99, the Rigel 288 tests to the new standard for in-service and after repair testing of medical electronic devices, currently drafted in as the IEC 62353.
944i - Hipot / Dielectric Tester The Vitrek 944i combines AC dielectric strength testing (AC Hipot) with DC dielectric strength testing (DC Hipot), insulation resistance (to 65 Gigohms) and earth continuity measurement all in one feature-rich automated instrument. This compact dielectric analyzer lets you measure four electrical safety test parameters from a single test connection-all with the touch of a button.
Results 1 - 19 of 19
- Electrical Safety Analyzers x
- AC (7)
- AC/DC Hipot (7)
- Compliance Test (8)
- Current (8)
- DC (7)
- Ground (10)
- Ground Bond (6)
- Ground Resistance (9)
- Hipot (7)
- Insulation (8)
- Insulation Resistance (8)
- Insulation Test (8)
- Leakage (7)
- Resistance (10)
- Resistance Test (10)
- Safety (16)
- Safety Compliance (7)
- Safety Test (16)
- Testers (7)
- Testing (10)
- »See All 114 Features