EMC
More InfoAKA:
Electromagnetic Compatability
| Narrow Your Results: | Analyzers, Probes, Software, Test, Test Services, Leak Detectors, Surge, TEM Cells |
|---|---|
| Related Searches: | Anechoic Chambers, Antennas, Capacitor Test, Comb Generators, Compliance Test, Current Probes, EMF, EMI, ESD, Field Strength Meters, Filters, Flicker, Ground Resistance Test, Impulse Generators, Isolators, Magnetic Field Test, Magnetic Test, Microwave Amplifiers, Noise, Resistors, RF Amplifiers, RF Power Meters, RFI, Shielding, Signal Generators, Test, Transformers, Transient Recorders, Video Noise |
| Expand Your Results: | Electromagnetic Radiation |
-
NSG 4070 - EMC Immunity Test System Teseq AG Contact Info Send To Colleague
An advanced combination of signal generator and compact immunity test system. Its large frequency range from 9kHz to 1GHz and its modular set-up using internal or external amplifiers enable a large variety of applications including tests according to IEC 61000-4-6, various BCI applications as well as signal generator and power meter for test s ...more -
SMR 4518 EMI Measuring receiver 9kHz Teseq AG Contact Info Send To Colleague
Fully CISPR 16-1 compliant. Easy operation. 8.5' TFT-colour display. Frequency accuracy of 10 -6. Overranging protection by pre-selection and auto-ranging. Perform scalar analysis on quadripole networks with control of an external signal generator. 9kHz bandwidth usable in the GHz range ...more -
ProfLine 2100 - Emission & Immunity Test Solutions Teseq AG Contact Info Send To Colleague
ProfLine 2100 cost-effective emission and immunity test solutions. Key equipment under test electrical parameters updated continuously. User selectable test limits. Start and stop flicker tests with a single mouse click. User selectable test parameters and data display options. At the heart of ProfLine 2100 is an IEC-compliant power analyzer p ...more -
Modula - Power Quality Test Generator Teseq AG Contact Info Send To Colleague
Modula is the most convenient multifunction generator to simulate electromagnetic interference effects for immunity testing in conformity with international, national and in-house standards including the new IEC/EN standard. Modula, the easiest way to test EMC. ...more -
ELT-400 - Exposure Level Tester Narda Safety Test Solutions Contact Info Send To Colleague
The ELT-400 for measuring magnetic fields in occupational and public environments and in EMC laboratories is especially designed for use by health and safety professionals in industry and insurance. The instrument performs precise B-field measurements in the frequency range from 1 Hz to 400 kHz. The ELT-400 uses a standards-compliant 100 cm2 p ...more -
EMC Radio Frequency Test Equipment Teseq AG Contact Info Send To Colleague
A complete range of EMC radio frequency test equipment ranging from measuring receivers, power amplifiers, GTEM cells to very powerful software for the automation of EMC test houses, completed with a high number of accessories and system reference verifiers such as reference radiation sources. ...more -
HLP-2603 Hybrid Log Periodic 26 MHz - 3 GHz TDK RF Solutions Inc. Contact Info Send To Colleague Ultra Wide Range The TDK RF Solutions HLP-2603 Hybrid Log Periodic antenna offers unequaled performance over the ultra wide frequency range of 26 MHz to 3 GHz for EMC immunity and emissions measurements. ...more -
EMC Test and Design Course A.T.E. (Advanced Test Engineering) Solutions, Inc. Contact Info Send To Colleague Course introduces EMC compliance requirements and methods by which they can be tested. It covers techniques designers should use to improve compatibility. ...more -
MAINS HARMONICS and VOLTAGE FLICKER TESTING EMC Technologies Pty Ltd Contact Info Send To Colleague EMC Technologies is now able to provide state-of-the-art testing in-house, to the various Mains Harmonic emissions standards AS/NZS 61000.3.2 and the Voltage Flicker/Fluctuations standard AS/NZS 61000.3.3. These standards are mandated by EMC Directive 89/336/EEC for CE Marking purposes. They are also called up by the Generic Emission standard ...more -
PW16C3 / PW16C3-MR-Single point load cell HBM, Inc Contact Info Send To Colleague Off center load compensated (OIML R76). Meets EMC standards (EN 45 501). Reduced minimum LC verification interval for multi range applications (PW16C3-MR). Parallel connection of equal LC possible (PW16C3-MR) ...more -
DPS50 Series Astec Power division of Emerson Contact Info Send To Colleague Universal AC input. CE Mark EMC & LVD. Fully regulated output. Overload and short circuit protection. Blue Angel compliance. Constant voltage. High efficiency. High MTBF. IEC320 AC receptacle, 3 pin (type C14). ...more -
EMC 2004 - Pulse Generator System HILO - TEST Contact Info Send To Colleague The impulse generator system EMC 2004 has been designed for dielectric testing of electric components, overvoltage protectors and electronic circuits acc. IEC, VDE etc. The basic version generates impulse currents with wave form 8/20 µs and peak value 0-25 kA. In addition to that, various other plug-ins are available ...more -
CBA 9433 Power amplifier 80 - 1000MHz 200W Teseq AG Contact Info Send To Colleague Reliable. Tested and matched to EMC antennas. Protected outputs for EMC test loads ...more -
EMS-K1 - EMS Software Rohde & Schwarz Contact Info Send To Colleague The powerful Software Package R&S EMS-K1 forms the basis for the automatic control and monitoring of EMS test systems and also for the acquisition and analysis of the measurement data. The software is extremely user-friendly and has been optimized both for tests in development and acceptance tests. Predefined automatic test sequences and p ...more -
SPECTRAN HF-6060 Rev. 3 Aaronia AG Contact Info Send To Colleague Entrance level unit into PROFESSIONAL measurement up to 6GHz. Vastly extended range, high accuracy and yet again enhanced functionality including 256 point FFT. THE affordable solution for analysis of any kind of EMC problems. This NEW Revision3 offers a "cristal clear" display without "20MHz aliases" and offers a optiona ...more -
JB Series - Broadband Antennas 30 MHz - 6 GHz Sunol Sciences Corp. Contact Info Send To Colleague JB Series antennas are compact, high-performance instruments designed for EMC emissions and immunity testing. The broadband characteristics of these antennas enable them to operate over a wide frequency range - a must for automated test environments. ...more -
Professional test sequences - Audio, Video and EMC Measurement Professional Test DVDs Rohde & Schwarz Contact Info Send To Colleague The world's most comprehensive DVD set with test patterns and data streams. A new DVD set from Rohde & Schwarz is the world's first and unrivalled collection of professional test patterns and data streams. These test sequences are used for audio, video and EMC measurements in development and conformance testing as well as for objective tes ...more -
EMC Testing and Product Safety testing Acme Testing Co. Contact Info Send To Colleague Electronics testing service providing the finest in equipment and personnel. We offer a complete and automated independent test facility that specializes in validation of electronic equipment to meet international consumer and commercial EMC standards for the FCC, Industry Canada, BSMI (Taiwan), VCCI (Japan), and the European EMC Directive for the ...more -
GR-1089 National Technical Systems Contact Info Send To Colleague NTS has all the required expertise and facilities to perform all over-voltage, EMC, lightning, safety, and other requirements as specified in GR-1089. The NTS facilities contain six three-meter chambers, four ten-meter Open Area Test Sites (OATS), and two ten-meter chambers. The NTS facilities have the standard European Mark (CE) testing exper ...more -
PW10C3 / PW10C3-MR - Single point load cells HBM, Inc Contact Info Send To Colleague Off center load compensated (OIML R76). Meets EMC standards (EN 45 501). Reduced minimum LC verification interval for multi range applications (PW10C3-MR). Parallel connection of equal LC possible (PW10C3-MR) ...more -
SA1000 - 1.1 GHz EMC ANALYSER LAPLACE INSTRUMENTS LTD Contact Info Send To Colleague The SA1000 with EMCEngineer software offers the most powerful and affordable system available for both compliance and pre-compliance emissions measurements. It even includes a TestDirector mode which invokes an ?expert system? to help decide which EN standard and limit level applies to your product, then prompts you through the complete test p ...more -
CBA 9425 Power amplifier 150kHz - 230MHz 30W Teseq AG Contact Info Send To Colleague Reliable. Ideal for various types of conducted immunity testing. Protected outputs for EMC test loads ...more -
TP-02 Tri-Plate and Table TDK RF Solutions Inc. Contact Info Send To Colleague The TDK RF Solutions TP-02 Tri-plate and integrated table is specifically designed to generate fields for EMC testing in automotive component test environments. The TP-02 has a linear response in the operating range of DC to 500 MHz with extended operation to 1 GHz. ...more -
GTEM Test cells for EMC testing DC to 20GHz Teseq AG Contact Info Send To Colleague Emission and immunity testing in one fixed, shielded environment. Meets IEC / EN 61000-4-20 and FCC ANSI C63.4. Generated fields are largely homogeneous and simple to calculate. Efficient power conversion requires smaller power amplifier ...more -
Medical Device Testing National Technical Systems Contact Info Send To Colleague NTS can be your one-stop-shop for all test needs, including product testing for the medical industry. NTS has years of experience in Environmental and EMI/EMC testing. With our partnerships, NTS can offer certifications on medical products. Whether your product can experience changes in environmental conditions such as shock, vibration, temper ...more
|
Definition: Equipments immunity from and emmissions of EMI. |
Links:
|