EEPROM

GAO USB Universal Device Programmer supports from 4000+ to 22000+ devices to meet your different needs for device programming or IC testing. Check out the device support list of our universal programmer to match the chip you want to program or the adapter you may need. Interface with any laptop, PC, PS/2 or compatibles through USB port or prin ...more

VP480 Universal Programmer Features: Dimensions: 168×108×26mm, weight: 300g 48 Pin ZIF socket with universal pin-drivers. Supports more than 16000+ devices Interface with any laptop, PC, PS/2 or compatibles through USB port. Accepts standard file formats: JEDEC, INTEL (Extended) HEX, Motorola S record Manages 16 and 32-bit word split (Set Prog ...more

GAO USB Universal Device Programmer supports from 4000+ to 22000+ devices to meet your different needs for device programming or IC testing. Check out the device support list of our universal programmer to match the chip you want to program or the adapter you may need. ...more

On-board TMS320F2812 DSP, 32-bit fix-point Flash DSP, operating at 150Mhz. 128K*16 bits on-chip Flash program memory, Flash encryptable. 18K*16 bits on-chip SRAM. 64K*16 bits extended SRAM as program/data RAM (upgradable to 512K*16 bits). 2Kbit serial EEprom. 10M Ethernet interface, compatible with NE2000. LCD interface(driver compatible with ...more

Cablescans line of microprocessor-based testers/build aids is designed to enable you to select from a wide variety of configurations number of test points, optional printer, optional PC, program storage by EEPROM or Floppy, etc. They do, however incorporate a number of features that are common to all of them. ...more

Cablescans line of microprocessor-based testers/build aids is designed to enable you to select from a wide variety of configurations number of test points, optional printer, optional PC, program storage by EEPROM or Floppy, etc. They do, however incorporate a number of features that are common to all of them. ...more

Cablescans line of microprocessor-based testers/build aids is designed to enable you to select from a wide variety of configurations number of test points, optional printer, optional PC, program storage by EEPROM or Floppy, etc. They do, however incorporate a number of features that are common to all of them. ...more

Cablescans line of microprocessor-based testers/build aids is designed to enable you to select from a wide variety of configurations number of test points, optional printer, optional PC, program storage by EEPROM or Floppy, etc. They do, however incorporate a number of features that are common to all of them. ...more

Design, Analyze, Debug and Pre-compliance Test HDMI CEC Products with the CEC-TME (Consumer Electronic Control-Test Management Environment) Test Suite. EEPROM emulator - emulates two HDMI CEC sources and one HDMI CEC sink device for Auxiliary Channel testing. Features re-programmable E-EDID. Analyzes incoming video, sync and field timing and rates ...more

Cablescans line of microprocessor-based testers/build aids is designed to enable you to select from a wide variety of configurations number of test points, optional printer, optional PC, program storage by EEPROM or Floppy, etc. They do, however incorporate a number of features that are common to all of them. ...more

The latest Memory Modules come with a small EEPROM call the Serial Presence Detect (SPD) which the computer uses to identify the characteristics of the memory modules. Computer manufacturers identify modules through SPD signatures written on the DIMM Module. Some computers cannot work with memory modules having mis-match SPD.  ...more

SystemBIST is a complete plug-and-play IC for flexible FPGA configuration and embedded JTAG test built upon several unique patent-pending architectures. SystemBIST is a code-less processor which enables design engineers to build high quality, self-testable and in-the-field re-configurable products. SystemBIST is vendor independent and can conf ...more

Today's telecommunications and computer systems increasingly take advantage of devices such as laser and IR diodes, EEPROMS and flash memories which operate at high voltages or currents. The Agilent 8114A high power pulse generator delivers fast, clean positive or negative pulses up to 100 V at frequencies up to 15 MHz. ...more

Operates with the EPM, EPM-P and P-series power meters. Wide dynamic range sensors (80 dB maximum). Accurate average power measurements on all modulation formats. Wide frequency coverage from 9 kHz to 18 GHz (special option to 24 GHz). Calibration factors stored in EEPROM. Fast measurement speed over the GPIB (up to 400 readings per second wit ...more

The new DFN/LAP Bug Katcher enables software and hardware design engineers debugging programmable code to rapidly remove and replace the DFN/LAP package after making a programming code change to the EEPROM ...more

Octal TMS320C40 Processor. Up to 2 MB user flash EEPROM shared by all processors. MIX or PMC (PCI Mezzanine Card) expansion bus modules ...more

Services for ASIC houses and Integrated Device Manufacturers are IC Wafer / Final Test, IC assembly, Test Program development, product engineering, Flash / EEPROM programming, characterisation / capability studies, yield enhancement, design verification and failure / yield analysis. Das Test Haus are specialists for wafer test, low power, mixe ...more

48 pin single-site universal programmer. Over 8750 device types. Includes 3V parts. EPROMs, EEPROMs, FLASH EPROMs and Emulators up to 48 pins. PLDs and FPGAs including PALs, GALs EPLDs, MACH, MAX, etc. ...more

The AD42600 series of EEC Reprogramming systems are portable units used for field reprogramming of the Application Code/Trim EEPROM memory or Trim EEPROM memory area of the Hamilton Sundstrand Electronic Engine Controls (EEC's). ...more

The Model 200 programs EPROMs, EEPROMs, and FLASH memories up to 32 pins, and it does it fast. A 1Mbit EPROM can be blank checked, programmed, and verified in under a minute by the Model 200P. Other families of devices can be programmed by the use of low cost adapters. This approach saves you money by allowing you to buy the programming adapte ...more

The AMX400 provides fast accurate instrument calibration using the auto-calibration feature. Calibration reference data is stored in EEPROM and is certifiably traceable (NIST). ...more

The DDS6m Direct Digital Synthesizer Module is a Precision 40 MHz Signal Source on a small (2.5" x 3.5") circuit board. It provides both Sine and Clock outputs from 100 Hz to 40 MHz in 0.025 Hz steps. The RS232 serial interface makes it easy to set the output frequency and save the settings in EEPROM memory. It has excellent spectral ...more

Operated as a pressure transmitter with 4-20 mA current output, freely adjustable. Clear multi-function display, exact and fast pressure readings on the spot. Operating voltage failure-proof sotrage of settings in EEPROM ...more

The DDS5m Lockable Digital Synthesizer Module is a Precision 40 MHz Signal Source on a small circuit board. The DDS5m can be locked to an external frequency standard to provide accuracy and stability equal to the standard. It provides both Sine and Clock outputs from 100 Hz to 40 MHz in 0.025 Hz steps. The RS232 serial interface makes it easy ...more

The EBN-1400 four port 10/100 Ethernet card is designed for long life. It incorporates four Intel 82559ER Ethernet controllers. The 82559ER integrated the MAC and PHY into a single chip for higher board integration and lower costs. Additional features of the 82559ER include, 256 byte configuration EEPROM and Wake-On-Link-Status.  ...more