|Sponsor Your Catalog|
ARINC 429 LabVIEW Instrument Driver AIT's ARINC 429 LabVIEW Instrument Driver is an easy-to-use, "Compatible with LabVIEW" Instrument Driver which provides high level Virtual Instruments (VIs) that support quick prototyping and deployment of ARINC 429 applications.
NRT-LVD - LabView Drivers NRT offers LabView drivers to control the NRT-PMDSs: NRT-10033A and NRT-40133A. There are two drivers in the set: NRT PMDS Calibrate.vi; calibrates the PMDS to the user input transponder wavelength; NRT PMDS Set PMD.vi; changes the PMDS state to the user input DGD and SOPMD values. These states can be read from a data file having a column for DGD and and a second column for SOPMD.
NI LabVIEW IVI Driver Toolkit for Windows IVI is a new architecture for building advanced instrument drivers. IVI instrument drivers are designed to handle the more rigorous requirements of production test systems for speed, flexibility, and long-term reusability. With IVI, you can build hardware and protocol (GPIB, VXI, and RS-232) independent test programs, so you can preserve your investment in test software as your instruments and instrumentation platforms change. In addition to interchangeability, IVI drivers provide instrument simulation and high-speed state caching. Visit www.ni.com/ivi for the latest list of the IVI drivers.
LabVIEW? Instrument Drivers LabVIEW? instrument driver packages instrument capabilities as a set of standard VIs. Each VI corresponds to a programmatic operation, such as configuring, reading from, writing to, and triggering the instrument.
CSBus Modular Test LabVIEW Drivers Aeroflex has available National Instruments LabVIEW? Virtual Instrument drivers for many of the CDSBus (Colorado Data Systems Bus) Modular Instrument-on-A-Card products, as well as selected general purpose products.
D2K-LVIEW - LabVIEW™ DLL Driver for ADLINK DAQ/DAQe/PXI-2000 Series Cards D2K -LVIEW is the LabVIEW™ driver for ADLINK DAQ-2000 series data acquisition cards. For National Instruments LabVIEW™ users, D2KLVIEW provides a full set of VIs that operate with DAQ-2000 series data acquisition cards and lets the users make full use of the advanced functionalities of DAQ-2000 cards, such as simultaneous AI,sophisticated gain-queue setting, arbitrary waveform generation and so on.(LabVIEW™ )
ACLS-LVIEW - LabVIEW™ DLL Driver for ADLINK ISA-bus Data Acquisition Cards ACLS-LVIEW is the LabVIEW™ driver for ADLINK NuDAQ ISAbus data acquisition cards. For National Instruments LabVIEW™ users, ACLS-LVIEW provides a full set of VIs that operate with NuDAQ ISA-bus data acquisition cards and lets the users make full use of the capabilities of NuDAQ cards.(LabVIEW™ )
Avionics Test & Simulation PXI Systems Fully integrated high-channel density Avionics Test & Simulation PXI systems for LabVIEW® applications. The AIT Avionics Test & Simulation PXI systems feature fully integrated high-channel density avionics data bus test and simulation systems for Fibre Channel, MIL-STD-1553, ARINC 429, and ARINC 664 using AIT's industry-leading PXI and PXI Express avionics interface modules with LabVIEW® certified device drivers.
Instrument Driver Development We provide native LabVIEW instrument drivers and IVI instrument drivers using LabWindows/CVI. We develop GPIB, Serial, VXI, Ethernet, CAN, and DeviceNet instrument drivers for end users and instrument manufacturers.
NI-SWITCH - IVI-Compliant Instrument Driver for Switches IVI-Compliant Instrument Driver for Switches - The driver works with NI LabVIEW, LabWindows/CVI, and Measurement Studio (for Microsoft Visual Basic and Visual C++). NI-SWITCH also provides a soft front panel so you can quickly and easily access hardware.
Model 4475B - Converter, 32 Channel 32-Channel 16-Bit 100 kHz A/D Converter (VXI). Includes platform-independent VI driver for National Instruments LabVIEW
NI-Motion - Driver Software for NI Motion Controllers Driver Software for NI Motion Controllers - National Instruments NI-Motion driver software, which is included in every purchase of an NI motion controller, is a set of high-level software commands for communicating with NI motion controllers. This software includes a variety of LabVIEW VIs and examples to help you quickly create your motion control applications. NI Motion Assistant can generate NI-Motion driver code to get you started with developing your application. NI-Motion is compatible with LabVIEW Real-Time and also includes NI Measurement & Automation Explorer to help you configure and tune your motion system.
DAQPilot - Task-oriented DAQ Driver and SDK DAQPilot is ADLINK new generation DAQ driver and SDK for full-line DAQ products. ADLINK's DAQPilot provides task-oriented SDK for API, ActiveX controls, and .NET assembly. For LabVIEW users, DAQPilot supports Express VI and Polymorphic VI libraries. Programmers can interactively configure ADLINK DAQ products through DAQPilot Express VI and Polymorphic VI libraries.
Toshiba PCB Tester G. Systems designed and implemented a test system for Toshiba's PCB board tester. Modular driver level code was written in LabVIEW for easy test creation using the National Instruments Test Executive. Encapsulated top level drivers were created to interact with the switch matrix, oscilloscope, DMM, and serial port. The result included a reduction in testing time and user intervention.
ASF - single-shot autocorrelator (SSA) Pulse duration ranges from 20 fs to 2 ps. LabView drivers for easier integration. <1 uJ sensitivity for 1-10 Hz operation for 50-100 fs pulses at 800 nm. USB PC connection and acquisition software.
TC-USBIO - I/O-Card TC-USBIO 0810 is digital I/O card connected via USB bus. Card have eight 24 VDC inputs and ten relay outputs. Inputs and outputs are equipped with led indication. Card has virtual com-port driver for windows and LabVIEW -drivers. Relay output contacts are protected with varistors. Operating voltage is 24VDC. Inputs and outputs are galvanically decoupled from control logic. Product is supplied with DIN rail mountable mounting base. Card has own switched-mode power supply witchseparates control logic from input voltage.
NI Driver Software for Digital I/O National Instruments includes the robust, easy-to-use NI-DAQ driver software with its digital I/O and other DAQ device. It tightly integrates the full functionality of your digital I/O hardware to LabVIEW, Measurement Studio, C/C++, and Visual Basic. NI-DAQ implements a variety of digital I/O operations. High-performance features include multidevice synchronization, networked measurements, and DMA data management. Bundled with NI-DAQ, the Measurement & Automation Explorer utility simplifies hardware configuration with device test panels, interactive measurements, and scaled I/O channels.
SHSA-101-100 / SHSA-101-50 - High Density 8ch Precision SMU in 3U/2Slot of PXI Maximum supply voltage ±20V. Maximum supply current ±100mA (SHSA-101-100) or ±50mA (SHSA-101-50). 4-Quadrant operation (up to 2 Watt) on each channel. Improved alarm funcion suitable for the inspecting system. Most suitable for the inspecting systems for various electoronic devices. Alarms : Oscillation / Limit / Range / GND sense / Signal guard Including a driver VI for the LabVIEW software. Including a driver DLL for Windows operating system. Also it bundles valuable sample codes for C++ programing.
TXP5000 - Series Photonic Test & Measurement Platform Available Plug and play modules include integrated laser drivers and TEC controllers, DWDM DFB laser sources, a tunable laser, and an advanced polarimetry control and measurement. All modules are interchangeable and can be integrated with LabVIEW™ and LabWindows™/CVI control. The TXP platform is operated and configured by a PC.
NI PCI-6731 - High-Speed Analog Output -- 1 MS/s, 16-Bit, 4 Channels 8 digital I/O lines; two 24-bit counters; digital triggering Onboard or external update clock RTSI bus for synchronization with DAQ, motion, and vision products NI-DAQmx driver with configuration utility to simplify configuration and measurements Superior integration: LabVIEW, LabWindows™/CVI, and Measurement Studio for VB and VS .NET
Model 1007C - Temperature Chamber Temperature Chamber -73°C to +175°C Temperature Range 7 Cu Ft Workspace (24 W x 21 H x 24 D) Programmable Temperature Controller RS-232 Interface, Optional GPIB LabVIEW Drivers High/Low Limit Control and Alarm Non-CFC Cascade Refrigeration
NI PXI-8512/2 - 2-Port High-Speed NI-XNET CAN Interface, PXI 2-port high-speed CAN interface (up to 1 Mbit/s) with onboard TJA1041 transceivers NI-XNET driver for developing frame and signal applications in LabVIEW, LabWindows™/CVI, and C/C++ NI-XNET device-driven DMA engine for coupling the CAN bus to host memory to minimize message latency
NI PXI-8431/8 (RS485/RS422) - High-Performance, 8-Port Serial Interface for PXI Minimal CPU usage with DMA transfers Memory mapped to prevent I/O resource conflicts Certified Windows quality driver for quick installation Includes converter cable (SCSI-68 to 8 DB-9 male connectors) LabVIEW Real-Time compatible Customizable baud rates up to 3 Mb/s and 128 B transmit and receive FIFOs)
NI PCI-8430/8 - High-Performance 8-Port Serial Interface for PCI Compatible with Windows and LabVIEW Real-Time OSs Flexible standard and nonstandard baud rates from 57 baud to 1,000,000 baud Includes NI-Serial COM port driver and NI-VISA API for easy programming in LabVIEW 128 B transmit and receive FIFOs, Memory-mapped to prevent I/O resource conflicts
Results 1 - 24 of 138
Drivers - translate general instructions into hardware specfic commands.
- LabVIEW x
- Boards (48)
- Cards (50)
- Data Recorders (40)
- Digital I/O (71)
- Digitizers (40)
- High Speed Data Recorders (40)
- I/O (77)
- Instrument Control Buses (90)
- Life (46)
- Memory (57)
- PCI (52)
- PCI Express (45)
- Signal (69)
- Software (93)
- Speed (56)
- Synchronization (47)
- Time (60)
- VEE (47)
- Waveform (43)
- Windows (61)
- »See All 269 Features