Distortion Analyzers

Designed for rack-mount and production applications, the ATS-1 offers the same measurement functionality and ease of use as an equivalent Portable One, but is housed in a fan-cooled metal case, designed for front or rear modular connector placement and rack mounting. The ATS-1 Plus Access includes comprehensive analog generation and measuremen ...more

The Model 2016 Total Harmonic Distortion Multimeters combines audio band quality measurements and analysis with a full-function 61/2-digit DMM. Test engineers can make a broad range of voltage, resistance, current, frequency, and distortion measurements, all with the same compact, half-rack measurement instrument.  ...more

The Calan 3010H is a rack-mounted headend unit that supports up to ten 3010R field instruments simultaneously on the return path, and an unlimited number of 3010Rs field units as a forward sweep transmitter.  ...more

The Model 1121 audio analyzer provides fast, accurate measurements including frequency, AC or DC level, distortion, SINAD and signal-to-noise ratio. It also includes an audio source providing accurate low distortion signals over wide frequencies and level ranges ...more

The Gold Line Polarity Analyzers utilize state of the art signal processing to accurately determine absolute polarity which is unimpaired by passive crossovers or signal waveform distortions produced by the device under test. ...more

Monitoring of the harmonic distortion of the network with possibility of supervising the harmonics to row 63 (3150Hz). ...more

The Model 8201 provides precision modulation and audio analysis in a single, easy-to-operate package. Measures AM, FM, PM, carrier and audio frequencies, SINAD, distortion and carrier level. ...more

The combination of excellent phase accuracy, excellent amplitude accuracy and low distortion from each channel make the Model 5500-2 Phase Standard ideal for calibrating Phase Meters, Vector Voltmeters, Broadband Wattmeters and Power Analyzers, Resolvers and other Phase Sensitive Instruments. ...more

The Model FLT-1 is a discrete, narrow, bandpass filter. It is available in both standard and custom configurations. Typically, the Model FLT-1 is used in conjunction with a spectrum analyzer to eliminate distortions created in the spectrum analyzer when multi-carrier distortions are to be measured. ...more

A software DSP tool for test, alignment and performance verification of radio communications receivers. Directly measure 1KHz SINAD, SNR, THD and THD + Noise (THD+N). ...more

The Krohn-Hite Model 6900B is the first and only fully automatic Distortion Analyzer to provide an easy solution to your distortion and AC voltage measurements over the frequency range from 5Hz to 1MHz. ...more

This portable analyzer can be used anywhere in the cable network for analyzing RF signals with a comprehensive scope of measurements. From analysis of digitally modulated signals to tests of distortion and noise parameters in the field, this spectrum analyzer is an industry work horse. ...more

THE NEW POWER QUALITY ANALYZER FROM SUMMIT TECHNOLOGY! The PowerSight PS4500 Power Quality Analyzer is the best choice if you are looking for a versatile, easy-to-use power quality monitor that can record energy use, log voltage and current, plus capture power quality events such as transients, sags, swells and track harmonic distortion. Use it on ...more

Now, with our ?New? Model ATI-100 you can turn your existing Matrix Signal Generator and Switchable Filter Bank into a full-blown DTS (Distortion Test System).  Plug and play is the word, just plug in your Multiple Frequency Signal Generator, Switchable Filter Bank, Spectrum Analyzer, Oscilloscope, Power Meter, Frequency Counter, etc. to allow t ...more

The Agilent E1366A 50 Ohm RF Multiplexer is a B-size, 1-slot, register- based VXI module. It is the ideal choice to switch test signals to your oscilloscope and spectrum, network, distortion analyzers, or other RF equipment. The E1366A is identical to the E1367A, except that the E1367A has a 75 Ohm characteristic impedance.  ...more

The MiniSonic MS1/MS10 Audio Analyser/Studio Aid is a complete, hand held, two-channel analogue audio test set that measures frequency, frequency response, phase, level, noise, distortion, crosstalk, speed and path latency (delay). As well as being a quality tester it's a precision line-up tool, a stereo PPM, a balanced-unbalanced convertor (both w ...more

Power resolution is 0.1mW, minimum test current is 0.2mA, suitable for lower than 1W wait mode power consumption test. AC, DC of voltage, current, power, large LCD display, large information. High wave crest factor, more suitable for test big distortion load. 1%~120% of range can ensure the accuracy. Fast test speed, satisfy production line fast te ...more

The SR760 and SR770 are single channel, 100 kHz FFT Spectrum Analyzers with a dynamic range of 90 dB and a real-time bandwidth of 100 kHz. The SR770 additionally includes a low distortion synthesized source allowing you to measure the transfer functions of electronic and mechanical systems. The speed and dynamic range of these instruments, cou ...more

Compact instrument for audio measurements at analog and digital interfaces. Audio Analyzer UPL performs practically all types of analog measurement, from frequency response measurements through to externally controlled sweeps with reference traces, determination of 3rd-order difference frequency distortion, spectral display of demodulated wow ...more

After 2 Ghz relocation you will need a spectrum analyzer to tune in your ENG shot. The Morrow VC70BMS is a remote monitoring and control device that allows simultaneous multiple access, and provides a fast sweep speed and low latency to ensure real-time operation. You can bring back the data with any combination of network access devices, incl ...more

The MAK-6630 is an Audio Analyzer which incorporates the measurement functions of distortion, relative Value, AC/DC level and frequency in a single instrument, and also is equipped with a low distortion audio signal source (DDS method). This unit is designed for allowing a multifunction, high-performance and high speed measurements of various c ...more

The SR760 and SR770 are single-channel 100 kHz FFT spectrum analyzers with a dynamic range of 90 dB and a real-time bandwidth of 100 kHz. Additionally, the SR770 includes a low-distortion source which allows you to measure the transfer functions of electronic and mechanical systems.  ...more

The SR760 and SR770 are single channel, 100 kHz FFT Spectrum Analyzers with a dynamic range of 90 dB and a real-time bandwidth of 100 kHz. The SR770 additionally includes a low distortion synthesized source allowing you to measure the transfer functions of electronic and mechanical systems. The speed and dynamic range of these instruments, cou ...more

The SR760 and SR770 are single-channel 100 kHz FFT spectrum analyzers with a dynamic range of 90 dB and a real-time bandwidth of 100 kHz. Additionally, the SR770 includes a low-distortion source which allows you to measure the transfer functions of electronic and mechanical systems.  ...more

VIP SYSTEM3 is a lightweight portable power analyzer, with integrated printer. Vip System3 can perform measurements on threephase system and calculate equivalent threephase measures. It measures and prints voltages, currents, powers, cosj and waveform distortions. Vip System3 measures total energy consumptions and tariff-band consumptions. The ...more