Digital Voltmeters

New digital LED meters, improving the resolution of the readings to 1%. Four separate power supplies, all insulated from each other and grounded: high voltage, bias voltage, filament supply, and Helmholtz coil supply. AC/DC, high voltage, and high current for versatility. Voltmeter selectable between 80V and 500V supplies. Electronic overload ...more

The TE6100 is the first 100 MS/SEC measuring instrument that consists of a Digital Storage Oscilloscope, Spectrum Analyzer, Transient recorder and Voltmeter. This new PXI based, compact measuring instrument, can solve almost every measurement problem. Analyzing signals is done with an 8-bit resolution and a maximum sampling speed of 100 MHz. T ...more

The B&K Precision model 4051 is a programmable multifunction generator that is extremely versatile and affordable. It is a perfect instrument for R&D, Manufacturing Test Systems and Service and Repair. Because it is so versatile the 4051 is ideal for Educational and Training applications. Along with the standard features you would expe ...more

Multi-Function, High Accuracy, Phase Angle Voltmeter. Measures phase angle , total, fundamental, in-phase and quadrature. Designed for the Synchro/Resolver and LVDT/RVDT marketplace, this Phase Angle Voltmeter accurately makes measurements of Phase Angle, In-Phase, Quadrature, Fundamental and Total, as well as impedance, power and harmonics. ...more

Models 2003B and 2004 are high-accuracy AC voltmeters or true-RMS voltmeters. Exceptional noise rejection is provided by a conversion circuit with a crystal oscillator, which is set for either 50 or 50 Hz rejection. Both models are available for voltage or current input and allow special scaling for the output of a 5 A current transformer (CT). A s ...more

5880 features:Autoranging AC/DC default voltmeter with test inhibitor and warnings for enhanced user safety. Extra large digital display with backlight and analog bar graph. Weather resistant against dust and water to IP44. Multiple test voltage ranges. ...more

Models 2003B and 2004 are high-accuracy AC voltmeters or true-RMS voltmeters. Exceptional noise rejection is provided by a conversion circuit with a crystal oscillator, which is set for either 50 or 50 Hz rejection. Both models are available for voltage or current input and allow special scaling for the output of a 5 A current transformer (CT). A s ...more

3 1/2 digit AC power voltmeter All AVG models use a precision op-amp rectifier circuit to provide an economical, high-resolution AC voltmeter, which is calibrated to display the true-RMS value of sinusoidal signals ...more

5880 features:Autoranging AC/DC default voltmeter with test inhibitor and warnings for enhanced user safety. Extra large digital display with backlight and analog bar graph. Weather resistant against dust and water to IP44. Multiple test voltage ranges. ...more

Models 2003B and 2004 are high-accuracy AC voltmeters or true-RMS voltmeters. Exceptional noise rejection is provided by a conversion circuit with a crystal oscillator, which is set for either 50 or 50 Hz rejection. Both models are available for voltage or current input and allow special scaling for the output of a 5 A current transformer (CT). A s ...more

Output Voltage adjustable from zero to the specified voltage. High load & Line Regulation. Low Ripple and Noise. Over load and short circuit protection facility. Continuous meter indication by digital voltmeter and ammeter ...more

Model 2520 is an economical 5-volt powered, high-resolution, high-accuracy 4 1/2 digit DC voltmeter in a compact 1/16 DIN case. The height of the panel cutout is only 0.88 in (22.2 mm). The depth behind the panel is only 2.83 in (72 mm). Power consumption is 1 watt at 5 V dc. ...more

Models 201A and 201AN are two pinout versions of the same low-cost 3 1/2 digit DC voltmeter. They fit a standard 1/8 DIN panel cutout and require a depth of less than 4.1 in (104 mm) behind the panel. With the addition of a screw-terminal barrier strip, they become low-cost, pin-compatible alternatives to the Q2000A and Q2000B in applications wher ...more

C.T. operated meter testing only requires a lightweight phantom load with a maximum output of 10A. There are 4 versions of the Model 462. The Model 462B is the lightest and lowest cost type with 1.0 and 0.5PF switching. The 462E can inject currents in 30º steps from 60º lead to 90º lag. This model can also be fitted, as an option, with 3 digita ...more

Large variety of instruments, such as: ammeters, voltmeters, frequency meters, tachometers, chronometers, impulse meters, process indicators, multipurpose indicators with 2 output relays, etc. in different sizes and panel or DIN rail mounted. ...more

The New, Improved Triplett BQ-200A Plus is an accurate, hand held digital voltmeter designed to measure both 6-volt and 12-volt batteries. It can also be used to check the vehicle's electrical system. The BQ-200A Plus now contains a warning beeper that sounds when excessive voltage is applied to the unit ...more

4 1/2 DIGIT AC AVG / TRUE RMS VOLTMETER / AMMETER ...more

The QUANTA Q9000A DC voltmeter and Q9000B DC ammeter are ±9,999-count versions of the ±1,999-count Q2000A and Q2000B, respectively. They provide the same features and benefits (but no LCD display option), plus additional resolution required for many applications. A 1/8 DIN case with screw terminals for signal and power is standard. A wide range o ...more

Model 215 is an economical, 5-volt powered, 3 1/2 digit DC voltmeter in a compact 1/16 DIN case. The height of the panel cutout is only 0.88 in (22.2 mm), and the depth behind the panel is only 2.83 in (72 mm). Power consumption is 1 watt at 5 V dc. Low cost, small size and low power consumption at 5 V dc make the 215 ideal for OEM and portable-ins ...more

Models 201A and 201AN are two pinout versions of the same low-cost 3 1/2 digit DC voltmeter. They fit a standard 1/8 DIN panel cutout and require a depth of less than 4.1 in (104 mm) behind the panel. With the addition of a screw-terminal barrier strip, they become low-cost, pin-compatible alternatives to the Q2000A and Q2000B in applications wher ...more

The BQ-600A is an accurate, hand held digital voltmeter designed to measure 6, 12, 24, and 48 volt batteries. It can also be used to check the charging system of vehicles as well as computerized fuel, ignition, and catalytic converter systems. The BQ-600A is the ideal tool for the auto diesel mechanic. The BQ-600A now contains a warning beeper ...more

5880 features:Autoranging AC/DC default voltmeter with test inhibitor and warnings for enhanced user safety. Extra large digital display with backlight and analog bar graph. Weather resistant against dust and water to IP44. Multiple test voltage ranges. ...more

The QUANTA Q9000A DC voltmeter and Q9000B DC ammeter are ±9,999-count versions of the ±1,999-count Q2000A and Q2000B, respectively. They provide the same features and benefits (but no LCD display option), plus additional resolution required for many applications. A 1/8 DIN case with screw terminals for signal and power is standard. A wide range o ...more

Built in µp based time interval meter measuring from 1 millisec to 9999 secs. Panel with easy & clear legends to read. Continuously variable outputs. Digital ammeter & voltmeter. Auto cut-off & output isolated. Self sensing of contacts i.e. NO or NC. Potential free start - stop signals. ...more

Models 2003B and 2004 are high-accuracy AC voltmeters or true-RMS voltmeters. Exceptional noise rejection is provided by a conversion circuit with a crystal oscillator, which is set for either 50 or 50 Hz rejection. Both models are available for voltage or current input and allow special scaling for the output of a 5 A current transformer (CT). A s ...more