Digital I/O

The UF2-7005 has been designed with a unique memory saving mode for applications that require less that 16 channels. All other boards from different manufacturers use from 16 to 32 memory bits for each sample, regardless of the number of active channels. This means if you are only using one channel then the amount of memory allocated to each s ...more

The I/O modules of the 301x series stand out for their extended voltage at inputs and outputs. They are especially suited for industry control and automotive applications. The cards are provided with additional functions that allow a pre-processing of digital signals on the module-own microcontroller. The digital I/O modules can be used in com ...more

The C387 is a single-width, 6U, CompactPCI module with up to 256 digital input/output channels. The C387 base board supports 128 channels of TTL I/O. Four mezzanine card sites can be populated with other forms of digital I/O including isolated input, isolated output, relay output, AC switch output or differential I/O. The mezzanine card concep ...more

The 40-410 range of Digital I/O Modules are suitable for operating external devices, such as heavy duty relays (power,RF and high voltage types),solenoids,lamps etc.,or for interfacing with external logic,e.g.a programmable instrument with a BCD interface. Two choices of output drive are available:TTL for interacting with external logic and Op ...more

GPIB Data Acquisition and Control Board with 4 Analog Outputs, 6 Analog Inputs, 32 Digital I/O, 6 Relay Drivers, and 4 Thermocouple Inputs ...more

A IEEE-488.2 GPIB to digital interface with 40 I/O lines that can be used to easily adapt devices with digital signals to the IEEE-488/GPIB/HP-IP bus. Signal monitor feature allows the 4803 to detect signal changes on 15 inputs. High-current drivers and input pullup resistors. Drives more devices, longer lines and inputs CMOS signals or switch ...more

Model 4823B GPIB to Parallel Digital Interface Board provides 56 parallel I/O signals with same pinouts as ICS's older 4823A card. On-card header connects to ICS's GPIB Connector/Address Switch Assemblies. Download the 4323B data sheet as a PDF file. ...more

GPIB to Digital Interface Card with 128 HD Digital I/O lines. ...more

Model 4863 GPIB to Digital Interface provides 48 high power TTL type digital I/O signals that can be user assigned as inputs or outputs. Transfer data as bits, bytes or words. ...more

The Model 4867 GPIB Data Acquisition and Control Module provides analog and digital signals for controlling virtually any kind of a device and the capability to read back analog voltages, digital signals andtemperatures. ...more

Serial Data Acquisition and Control Board. Provides Analog I/O, Digital I/O, Relay Driver Outputs and Temperature Measurements. RS-232, RS-422 and RS-485 Serial I/O includes network address and network packet modes. ...more

Serial to Parallel Interface board with 40 Digital I/O Lines and RS-232 or RS-422/RS-485 serial inerface. Small 4.5 x 5.5 inch (114 x 140 mm) Board - Connector down version mates with 4804 Relay Driver Board. ...more

VXI-5524 Register-based VXI Interface Card provides 48 I/O lines and a 16-bit wide expansion bus for external logic. ...more

MCU A/D and D/A Experiment Board. Most MCU experiment systems in the market do not have the function of A/D and D/A conversions. In order to satisfy many inquiries of this function, we add serial A/D and D/A conversion components to this model of MCU. ...more

There are 4 different high-speed Digital I/O cPCI 6U cards in the UC7000 range, with the choice of 16, 32 or 64 TTL port widths. Each group of 16 channels can be user programmed as either port input or output. Channel handshaking is not possible. The cards are mainly used for digital recording or test pattern generation with a Device Under Tes ...more

There are two high-speed Digital I/O PXI cards in the UX7000 range, with the choice of 16 or 32 TTL port widths. Each group of 16 channels can be user programmed as either port input or output. Channel handshaking is not possible. The cards are mainly used for digital recording or test pattern generation with a Device Under Test (DUT) in the e ...more

Sleek, modern design, USB-based DAQ module with 8 analog input channels, up to 12-bit resolution, 50 kS/s, two D/A outputs and 16 DIO bits, in an attractive miniature case, with signals brought out to screw terminals. The USB-1208FS sets a new standard for low-cost, PC-based analog and digital I/O. Providing 8 single-ended inputs with 11-bit r ...more

A low cost 8 channel, 16-bit interface to any USB port. The USB-1608FS provides one A/D converter per channel, allowing all 8 channels to be sampled simultaneously.The USB-1608FS offers continuous single-channel sample rates up to 50 kilosamples/sec. Multiple-channel continuous sampling rates up to 100 kilosamples/sec total, where the maximum ...more

The KPCI-1801HC/1802HC multifunction data acquisition boards combine high performance with high channel capacity. They make it simple to gather analog data, read and output digital signals, provide analog stimulus, and much more. Both boards provide 32 differential or 64 single-ended inputs and two analog outputs. The KPCI-1801HC offers softwa ...more

This universal card eliminates the need for specialized, single function cards by providing an assortment of functions on one single card. The ?mother board? contains 3 independent module slots, each of which can be populated with a function specific module. The available functions are as follows: A/D, I/O Digital TTL, I/O Digital Defferential ...more

These multifunction data acquisition cards are for use with notebook and other PCs equipped with a PCMCIA port. They are ideal for field applications such as in-vehicle test as well as for laboratory applications where space is at a premium or portability is required. ...more

USB-based DAQ module with 8 analog input channels, up to 12-bit resolution, 1.2 kS/s, two D/A outputs and 16 DIO bits, in an attractive miniature case, with signals brought out to screw terminals. Winner of Desktop Engineering's Readers' Choice Award. The USB-1208LS from Measurement Computing adds a low cost analog and digital I/O interface to ...more

The 78C1 is a universal 6U cPCI Multifunction I/O Board that eliminates the complexity and size constraints of using multiple, independent, single-function cards. It contains 6 module positions, each of which can include the functions of A/D (10-channels), D/A (10-channels), Discrete I/O (16-channels), TTL I/O (16-channels), RTD (6-channels), ...more

Features: 48 mini-power relays, may be controlled individually. Relay can be set to ON, OFF, ON-OFF-ON and OFF-ON-OFF modes ...more

Your portable USB connection for analog and digital I/O. The USB-4700 series are true plug and play data acquisition modules. USB-4711 *8 Digital I/O * Analog Output 2 (12 bit). * Sampling rate up to 100kS/s. * One 32-bit counter. Connect to sensors with any USB enabled PC. ...more