Differential Amplifiers

The 27708A card provides eight channels of high performance AC/DC amplifiers. The Precision 27708A octal programmable amplifier card allows for up to 128 channels in one 28016A-M3 chassis. Systems beyond 128 channels may be accommodated by multiple mainframes controlled from a single controller. The 27708A provides overall gain of x1/16 to x40 ...more

The 28208 Octal Thermocouple Conditioner provides eight channels of conditioning for thermocouples or other DC and AC voltage inputs. The 28208 consists of a low-drift programmable differential pre-amplifier, a 3-pole programmable filter and a programmable post-amplifier. A rugged remote isothermal block with digital temperature sensor provide ...more

Fixed and programmable gain amplifier modules and instruments from -12 dB to +60 dB with full power bandwidth to 1.0 MHz. ...more

The Precision 28302B Dual Vibration Amplifier is designed to condition signals from rotating machinery. The card accepts inputs from single-ended or differential piezoelectric, IEPE accelerometers or remote velocity sensors. Programmable high-pass and low-pass filters remove unwanted out-band signals from the acceleration and velocity outputs. ...more

The Model 208B Instrumentation Amplifier is a eight channel, wideband, direct coupled, differential instrumentation amplifier. Completely adjustable from the front panel, each channel offers twelve fixed gain steps from 0.2 to 1000. A variable gain adjustment allows attenuation of the selected gain setting to the next lower setting. ...more

The VM2616 digitizer provides 16 independent channels of an analog to digital converter (ADC) with 16 bits of resolution and a sample rate of up to 100 kSa/s per channel. Each channel consists of an independent ADC combined with its own instrumentation amplifier, providing a true differential input. ...more

To study details of an computer and solve a given second order differential equation using it and generate a sine wave using a given analog computer with specified amplifier and frequency. ...more

The Trek Model 609E-6 high-voltage DC-stable power amplifier is designed to provide precise control of bi-polar output voltages in the range of 0 to ±4 kV DC or peak AC with an output current capability of ±20 mA DC or peak AC. The Model 609E-6 can be configured as a noninverting amplifier with a fixed gain of 1000 V/V, or as an inverting or d ...more

A new Guzik Head Amplifier Active Injector has bandwidth from DC to 6 GHz and provides a differential output signal with high symmetry of frequency response and group delay. This signal injector is required for frequency response measurements of high bandwidth analog front-end integrated in the Guzik test system.  ...more

16-CH 12-Bit 100 kS/s Multi-Function DAQ Cards ...more

NEFF's System 495 uses a proven widerange, guarded differential amplifier-per-channel technique with a dedicated high-speed analog-to-digital converter for each channel. In addition to storing data locally in memory, a subset of each channel's data can selectively be transmitted to the host for monitoring or recording at an aggregate rate of 1MHz. ...more

The 9250 is a bench-top, 2U, half 19” rack size, fully metal case dual channel amplifier. The instrument can be configured to be used as two, single-ended independent channels, or as a one input with two differential outputs. ...more

The Trek Model 609B-3 is a DC-stable, high-voltage power amplifier designed to provide precise control of output voltages in the range of 0 to ±10 kV DC or peak AC with an output current range of 0 to ±2 mA DC or peak AC. The 609B-3 can be configured as a noninverting amplifier, as an inverting amplifier, or as a differential amplifier. ...more

The 5307 is a general-purpose low-noise differential amplifier featuring a bandwidth of DC to 10MHz, a maximum gain of 1000 and a noise level of 4nV/√Hz. ...more

The MS series is suitable for pre-processing analog signals. The plug-in units of filters, differential amplifiers, isolation amplifiers, etc. can be installed into their frames.(16 channels at maximum/the JIS rack size) ...more

The Model 650 is a computer-controlled instrumentation amplifier. All operating parameters (gain, filter, zero) are programmable from a remote computer via RS-485 serial interface or standard Ethernet interface, with multiple racks daisy-chained to a single control computer.  ...more

SCS-801 portable signal conditioning system. Expandable from 8 up to 144 differential anti-alias low-pass filter and instrumentation amplifier channels. ...more

Sixteen Differential Low-Level 16-Bit Analog Input Channels. Software-selected ranges: ±10mV, ±100mV, ±1.0V, ±10V. Expandable to 256 Channels with Companion Expansion Boards. 16-Bit Scanning ADC.  Instrumentation Amplifier per Input Channel ...more

The DPM-79810 is a dual power meter module capable of two absolute power measurements or a synchronized differential power measurement. The DPM-79810 offers these features without the use of an external head, making it truly useful for optical amplifier production test ...more

For high-speed differential or single-ended probing in embedded designs, the InfiniiMax 1.5 GHz 1130A differential probe amplifier is a perfect complement to the Infiniium Series and 6000 Series 300 MHz - 1 GHz oscilloscopes. Its extremely low input capacitance high common mode rejection and the patented resistor probe tip technology provide u ...more

The 6016 input module has thirty-two input channels that are digitized to 16-bit resolution and output to the Series 6000 data bus. Each channel is capable of digitizing at up to 5,000 samples per second. The 6016 is used to digitize high level signals, usually the output of signal conditioning amplifiers or other measuring instruments. It is ...more

The DA1855A is a stand-alone, high-performance 100 MHz differential amplifier. It is intended to act as a signal conditioning preamplifier for oscilloscopes, digitizers and spectrum analyzers, providing differential measurement capability to instruments having only a single-ended input. When used with a DA1855A, oscilloscopes can obtain Common ...more

High-performance, microprocessor controlled signal-conditioning amplifiers are used for transducer data acquisition. Advanced features include automatic zero, balance and calibration, computer monitoring and display of excitation and output, operator warnings for out of limit conditions, and digital data storage for transient and waveform capt ...more

The CPCI 1228 board provides simultaneous et isochronous acquisition of 16 analog differential inputs, and 32 TTL I/Os ( 2 x 16 bits). Each analog input has: one instrumentation amplifier with software-programmable gain (1; 2; 5; 10) (protection ± 40V) ...more

The DXC200 is a pair of x1 probes matched for differential measurement applications. The DXC200 is designed to minimize capacitance loading (compared to coaxial cable) while still maintaining practical probe-to-circuit attachment. Full DA1800 series amplifier gain and Common Mode Rejection Ratio (CMRR) are maintained. The full gain capability o ...more