Data Generators

Model 4087 is a versatile, laboratory grade synthesized function generator. Direct digital synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms. The generator produces high purity, low distortion sine waves and provides a full suite of analog modulation capabili ...more

The TC-NT2 is a convenient and comprehensive cable tester for network professionals. Its powerful and user-friendly features enable network installers to accurately check pin configurations of various voice and data communication cables. The TC-NT2 includes a master unit that transmits test signals to its corre-sponding remote terminator to ver ...more

Permits technicians to identify the conductor within a bundle, at a cross-connect point or at the remote end.  Can be used on twisted-pair wiring (telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC wiring and most other wiring. ...more

Mobile SS IQ Generator IEEE 802.16e OFDM PHY Subscriber Stations Signal Generation Solution. SeaMAX Mobile SS IQ Generator generates IQ data (Uplink Frame) for testing WiMAX Subscriber Station's receivers. ...more

LANforge FIRE generates network traffic at various speeds with the ability to monitor packets for throughput and correctness. LANforge FIRE sits on the edge of your network and tests your network core. Useful for testing any network, and especially cost effective for efforts requiring many data-generating ports, such as DSL, Cable-Modem, and Satell ...more

The model PE7780 Data Mate Precision Tone Generator is intended to provide tone for tracing and troubleshooting communication circuits without disrupting digital traffic on the line or adjacent lines ...more

The 3217 is a synthesized RDS Standard Signal Generator covering 100 kHz to 140 MHz with CW, FM, and AM modulated outputs. It boasts an internal FM stereo generator, as well as FM multiplex RDS (Radio Data System) and TRI (Traffic Radio Information) signal generators. ...more

To meet the challenge of duplicating the complex communications system in a mine-sweeper, flexibility in configuration and mounting within the constraints of operational panels QM developed COMSIM 16. The unit is a case where the latest technology was used to simulate a novel system. QM Systems supplied a complete solution including consoles, ...more

The FB100A is a modular, expandable, high data rate BER (Bit Error Rate) test system. With operation from DC to 160 Mb/s, serial and/or parallel data interfacing and INSTALOK? synchronization, the versatility of the FB100A provides the flexibility to connect to most users' terminal equipment or evaluation boards and simply setup and run a test. ...more

Permits technicians to identify the conductor within a bundle, at a cross-connect point or at the remote end. Can be used on twisted pair wiring (telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC wiring and most other wiring ...more

IEEE 802.16e OFDMA PHY Base Station Signal Generation Solution. SeaMAX Mobile BS IQ Generator generates IQ data (Downlink) for characterizing the Base Station Receiver functionality. ...more

GREEN SOUND LEVEL METER, hybrid power. Model : SL-4113G * Power supply from generator (battery is no need) or DC 9V battery. * Meet IEC61672 class 2. * 30 to 130 dB, auto range. * A/C weighting, fast/slow time weighting, Peak hold, Data hold, Record, RS232/USB. ...more

The VX2026 is a high speed (40MS/s), 14-Bit, Arbitrary Waveform Generator for high performance testing. Build-in functions for pre-defined waveforms (sine, square, triangle, sawtooth) are available via software driver. Arbitrary waveforms will be loaded via data files into the on-board memory. ...more

Designed to test BER performance of modern CATV, DTV, satellite, LMDS, wireless, and wireline digital receivers. Supporting standard serial and parallel logic interfaces and framed data patterns defined by DVB, DSS DAVIC, DOCSIS, xDSL and others. ...more

DIO-Boards, Pattern Generators. The MX.70xx series of fast digital I/O boards offer a resolution between 16 bit and 32 bit with a maximum sampling rate of 125 MS/s (60 MS/s). The on-board memory of up to 128 MByte could be completely used for recording or replaying digital data. Alternatively the MX.70xx could be used in FIFO mode. Then data is tra ...more

DIO-Boards, Pattern Generators. The MI.70xx series of fast digital I/O boards offer a resolution between 16 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). Every 16 bit / 32 bit of the board could be separately programmed for input or output. The on-board memory of up to 512 MByte could be used completely for recording or replayi ...more

The LRS-220 includes all the functionality of the LRS-205, but is equipped with two sequence generators, thus enabling it to generate Gold, JPL and syncopated codes. The LRS-220 generates PN sequences that are useful for developing and testing both spread spectrum and conventional data communication systems. These sequences are generated with c ...more

STEREO FM/AM Signal Generator. Memory Stored from 10 Points in one Block can be up to 100 Continuous Points in Blocks and 4 Output Levels. All Operations are Controlled by Microprocessor. Memory Data Copied  ...more

DIO-Boards, Pattern Generators. The MI.70xx series of fast digital I/O boards offer a resolution between 16 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). Every 16 bit / 32 bit of the board could be separately programmed for input or output. The on-board memory of up to 512 MByte could be used completely for recording or replayi ...more

DIO-Boards, Pattern Generators. The MI.70xx series of fast digital I/O boards offer a resolution between 16 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). Every 16 bit / 32 bit of the board could be separately programmed for input or output. The on-board memory of up to 512 MByte could be used completely for recording or replayi ...more

DIO-Boards, Pattern Generators. The MX.70xx series of fast digital I/O boards offer a resolution between 16 bit and 32 bit with a maximum sampling rate of 125 MS/s (60 MS/s). The on-board memory of up to 128 MByte could be completely used for recording or replaying digital data. Alternatively the MX.70xx could be used in FIFO mode. Then data is tra ...more

DIO-Boards, Pattern Generators. The MC.70xx series of fast digital I/O boards offer a resolution between 16 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). Every 16 bit / 32 bit of the board could be separately programmed for input or output. The on-board memory of up to 512 MByte could be completely used for recording or replayi ...more

The technically advanced GE Druck DPI 610 and DPI 615 portable calibrators are the culmination of many years of field experience with the company?s DPI 600 series. These self-contained, battery powered packages contain a pressure generator, fine pressure control, device energising (not IS version) and output measurement capabilities, as well a ...more

DIO-Boards, Pattern Generators. The MC.70xx series of fast digital I/O boards offer a resolution between 16 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). Every 16 bit / 32 bit of the board could be separately programmed for input or output. The on-board memory of up to 512 MByte could be completely used for recording or replayi ...more

the world's most comprehensive digital TV test signal generator and data analyzer. Designed to meet the needs of video research and development engineers, it is flexible, programmable, cost-effective, whilst supporting all SDTV and HDTV serial digital video formats. The LAB is unique in providing all the functions of a high-end signal generator tot ...more