DTV

The LT 450 is a DTV-compatible multiformat pattern signal generator equipped with analog component and composite outputs and digital outputs. It generates monoscope, color bar, ramp, crosshatch, multiburst, character, and other test patterns. You can add additional digital outputs such as DVI-I and HDMI and analog outputs such as a SCART conne ...more

The LT 448 Multiformat Pattern Generator is designed to output analog component and composite signals applicable to the DTV systems. There is also a DVI-D output connector. This innovative generator includes a total of 29 digital television video signal formats conforming to Advanced Television Systems Committee (ATSC), and Digital Video Broad ...more

Designed to address the challenges of DTV tuner testing, the LG 3803 provides all of the signal control necessary for testing the performance of ATSC compliant tuners and receivers. The RF output can be set to emulate 8VSB, 64 and 256QAM modulation formats and the modulation frequency can be set from 50MHz to 900MHz covering the entire VHF and ...more

The LPT-3000 is a fully synthesized RF Spectrum Analyzer featuring simple user controls which allow the novice or the seasoned expert to use the LPT-3000 right out of box. The LPT-3000 provides you with a powerful RF test and measurement tool for CDMA and WCDMA RF systems, broadcasting RF systems, EMI/EMC. The features includes 6.4" color ...more

The 802R is our multimedia video signal generator for testing CRTs, flat panels, projectors and TVs including HDTV. The 802R draws 24-bits per pixel at the top pixel rate. The analog component output provides 300 or 400MHz pixel rate outputs. You can test the largest medical and graphics displays using the expanded 4K x 4K x 8 video memory. Th ...more

The broadband communications age has been created by several factors: advancement in signal processing technology, new radio frequency spectrum allocations, as well as today?s insatiable desire for information services. RF communication technology in the CATV, satellite, DTV, MDS, and wireless market spaces have driven the need for accurate, c ...more

The 802BT is our multi-media video signal generator for testing CRTs, flat panels, projectors and TVs including HDTV. The 802BT is optimal for DTV, digital and analog displays and allows production and engineering users to create the most complex test images. You get the flexibility required to meet a tough production budget with the wide range ...more

Designed to test BER performance of modern CATV, DTV, satellite, LMDS, wireless, and wireline digital receivers. Supporting standard serial and parallel logic interfaces and framed data patterns defined by DVB, DSS DAVIC, DOCSIS, xDSL and others. ...more

IF Loop-back testing – The CNG DTV Series of Noise Generators are specifically designed for IF loop-back testing, such as that called out by ATSCa80. The CNG DTV provides calibrated accurate C/N ratios for generating BER performance of DTV modems. ...more

Terrestrial ATSC DTV signal testing – The NOD DTV Series of manual Noise Generators are designed for field-testing terrestrial ATSC DTV signals. These noise instruments are portable, small and lightweight, providing accurate carrier-to-noise measurements in the lab, field, or factory. ...more

Designed to ease the engineering and financial difficulties associated with the migration to DTV. An economical solution for the coaxial and fiber optic transport and distribution of virtually any digital signal from DC to 1.5 Gbps. Supported standards include SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 Component and Wide Screen, 540Mbps 4: ...more

The Coaxial Dynamics 'Digital Wattchman' Rack Mounted Station Monitor/Alarm is similar in function and appearance to our 81090 Series except it is designed for the accurate measurement of complex RF Waveforms such as CDMA (Code Division Multiple Access), DAB (Digital Audio Broadcast), DTV (Digital TV) and HDTV (High Definition TV), as well as ...more

Terrestrial ATSC DTV signal testing – The ANG DTV Series of Noise Generators are specifically designed for field-testing terrestrial ATSC DTV signals. Offering the most flexible architecture available in an automated white Gaussian noise generator. ...more

Provides end-to-end, MPEG-2 / MPEG-4 transport stream monitoring and analysis for DTV signals carried by broadcast, cable, satellite, IPTV, or mobile networks. Key features include QPSK, 64/256 QAM, ASI and GigE, plus file inputs, remote monitoring capabilities, and IP routes analysis. ...more

Preamplified DTV/HDTV field testing – The ANG DTV2 Series of Noise Generators is a fully integrated, automated test subassembly that takes the output from a mobile or stationary DTV antenna, provides the necessary signal amplification and attenuation, and adds noise for accurate, calibrated SNR field testing. ...more

The Coaxial Dynamics 'Digital Wattchman' Rack Mounted Station Monitor/Alarm is similar in function and appearance to our 81090 Series except it is designed for the accurate measurement of complex RF Waveforms such as CDMA (Code Division Multiple Access), DAB (Digital Audio Broadcast), DTV (Digital TV) and HDTV (High Definition TV), as well as ...more

The Coaxial Dynamics High-Power Digital Wattmeters are designed for the accurate measurement of complex RF Waveforms such as CDMA (Code Division Multiple Access), DAB (Digital Audio Broadcast), DTV (Digital TV) and HDTV (High Definition TV), as well as CW, AM and FM. ...more

StreamScope RM-40 is a constant stream monitoring appliance. The RM-40 remotely monitors, measures, and records digital television (DTV) streams to ensure their integrity, reliability and compliance with standards and/or templates. The RM-40 is a powerful and user-friendly low cost monitoring solution that verifies DTV streams carried by service pr ...more

R&S DVRM is the optimized solution for the continuous monitoring of MPEG2 transport streams in real time. The measurements performed are necessary to ensure smooth interplay of all components of a DTV transmission network. R&S DVRM is controlled via the remote interface. It is designed for continuous operation, so all settings are stor ...more

This option from Rohde & Schwarz enhances the wide choice of already available transport streams by a large number of special streams particularly designed for testing and development of DTV decoders and receivers. ...more

DTV Monitoring Receiver. Realtime monitoring, demodulation and analysis of DVB-T signals via LAN. Easy integration into SNMP management systems. Cost-effective DVB-T monitoring receiver ...more

MSPG-6000 is consisted of individual output through 8 signal Generator, and displaying each other Time & PATTERN. It can be install by ANALOG, CVBS & S-VIDEO, SCART, DTV, HDMI, MEDIA PlAYER Slot. MSPG-6000 is Multi video signal Generator, It can test the standard panel and Multi media contents. ...more

The R&SDVRG is a universal processing platform for digital video streams. It enables recording and replay of MPEG-2 transport streams. For error analysis, recording can be controlled by means of an external trigger signal. The stored signal includes time sections of different lengths both before and after the trigger event. For multifacete ...more

MPEG signal generator supports all DTV standards(ATSC, DVB-T, DVB-S, DVB-C, Opencable, DMB-TH). It is possible to do it by means of selecting proper options you want. Each option is matched with one standard one-to-one. Also it is able to output only TS using common interface. In this case, standalone modulator is required. It¡¯s very cost-effe ...more

IPTV Stream Capture & Playback(IPC500) is a professional and powerful solution adapting MPEG DTV signals for streaming across IP networks. In a Lab environment, IPC500 is the most flexible solution for setting-up IPTV signal environment your engineers need. ...more