DC/DC Converters

NAI offers a wide variety of COTS and Custom Power Supplies and DC/DC Converters, specifically designed for the rugged-Military and Commercial Aerospace markets. All of our AC/DC power supplies and DC/DC converters provide high power-density, low profile, high reliability, and rugged packaging. They are available in ratings from 15 watts throu ...more

The VTC120 Series Voltage Converter is a variable duty cycle switching power supply with a precision linear regulator output (except for the VTC120nr-12-24). This model is common negative. This means that the input negative (ground) connection and the output negative (ground) connection are common or tied together. Applications include running ...more

Power from 0.25 to 340 Watts; currents from 0.02 to 80 Amps; voltages from 1.2 to 48 Volts; inputs from 3 to 75 Volts . . . C&D Technologies clearly offers the broadest line of single-output, isolated DC/DC converters in the entire power industry . . . without a doubt. ...more

The HPR2XX Series is designed for multiple channel applications that require small size and could benefit from a complete one-package solution. The HPR2XX Series offers four isolated channels of output power in a footprint less than the size of many singular devices. ...more

Operating from inputs as low as 4.7V or as high as 75V, each of these full-featured power converters offers a 3.3V or 5V primary output (with current as high as 30 Amps) and either ±12V or ±15V auxiliary outputs (with currents as high as ±4.2 Amps). Our versatile offering includes: the industry's smallest triples (1 x 2 inches, 25 x 50mm ...more

For analog/linear and other applications requiring bipolar/symmetric rail voltages, C&D Technologies' isolated duals generate ±3.3V, ±5V, ±12V or ±15V outputs from a single input voltage. Not surprisingly, the C&D offering is the industry's broadest. ...more

Fully compatible with Cisco Systems 3200 Series Mobile Access Routers, the DATEL MAPC-104 Mobile Access Power Card is a triple-output DC/DC converter in a PC/104-Plus format. The MAPC-104 accepts 12Vdc or 24Vdc inputs from a vehicular battery system and provides the fully protected 3.3V, 5.1V and 12V outputs needed to drive any standard configurati ...more

When your application requires multiple positive voltages and you can not easily derive one from the other using a non-isolated POL, consider an asymmetric dual. Asymmetric duals are isolated, 2-output DC/DC converters that typically provide two low voltages such as 3.3V and 1.8V. As such, they are ideal for driving the core and I/O ...more

This low voltage DC/DC converter operates from +28 VDC, MIL-STD-704D input power and produces eight output voltages. Designed to provide the system power for a sophisticated avionics system. This compact unit can be mounted via the mounting holes or in a card rack. ...more

This low voltage DC/DC converter operates from +28 VDC, MIL-STD-704A input power and produces 3 output voltages.  It is designed to provide DC power for an avionics system.  Internal electronics can be utilized for a variety of heatsink solutions or connector configurations.  ...more

This low voltage DC/DC converter operates from +28 VDC, MIL-STD-704 input power and produces seven DC output voltages. It is designed to provide the DC power for a sophisticated avionics system. Cooling for this unit is achieved through its open frame construction and its integral frame and heatsink. Use of Hi-Rel components and workmanship in ...more

The new Model FE-280A Series of DC/DC Converters offers up to 20 watts of power in a small aluminum case. Units are available in single, dual or triple outputs. All units include input and output filtering to meet stringent EMI requirements. The converter can offer regulation of better than 1% at end of life, typical 12 year mission. The units ...more

This low voltage AC/DC multi-output power supply operates from 115 VAC, three phase, 400 Hz and produces six DC output voltages. Off the shelf DC/DC brick type converters have been used in this design to achieve a high density, high current (400 amps) power supply ...more

This laser DC/DC converter operates from +28 VDC MIL-STD-704 power and produces a +150 VDC output voltage which is used to charge a 6,300 μF load capacitor. An EMI Filter enables this design to meet the EMI requirements of MIL-STD-461. It?s simple construction provides a rugged and cost effective solution for integration into the overall ...more

The VX6344 is a high-speed (100MS/s), 14Bit, 2 channel digitizer for high performance measurements. The signal inputs are floating. All internal supply voltages are generated with special designed DC/DC converters with extremely low-noise. The digitizer has 2MS (4MByte) of memory per channel installed. ...more

They are ideally suited for digital signal processing circuits and analog circuits less demanding for voltage stability, particularly distributed power supply systems and circuits serviced by low-power power supply. ...more

This potted low voltage DC/DC converter operates from +28 VDC input power and produces 6 output voltages. A rugged electrical and mechanical design provides the DC power for the telemetry system of a high performance air-to-air missile. This unit's unusual form factor demonstrates ACT?s ability to accommodate a wide range of unique shapes and ...more

ACT has the capability to rapidly package industry standard DC/DC bricks to meet your specific requirements.  Our designs provide mechanical and electrical enhancements that maximize the thermal, electrical and reliability characteristics of these high power density DC/DC converters. ...more

This low voltage DC/DC converter operates from +28 VDC input power and produces 3 output voltages. This potted power supply is designed to power individual elements of a sophisticated shipboard system.  ...more

The VX6026 is a high speed (40MS/s), 14-Bit, Arbitrary Waveform Generator with a floating output. All internal supply voltages are generated with special designed DC/DC converters with extremely low-noise. ...more

This DC/DC converter operates from rectified three phase 400 Hz input power and produces two output voltages. This potted power supply is designed to provide power to drive two laser diode banks. The load for this power supply is a 2000 µF capacitor with discharge pulses of 100 Amps for 300 µsec. It?s potted construction and iridited aluminum ...more

12V and 28V nominal output voltages Safety Approved Up to 58.5A Output Current Operation at 100°C Baseplate Opto Isolated Remote On / Off Wide Adjustable Output Ranges (7.2-13.8V or 16.8-32.2V) ...more

12V output for driving non-isolated converters Safety Approved Up to 80A output current Full power at 100°C baseplate Opto Isolated Remote On / Off Wide Adjustable Output Range ...more

When your application requires multiple positive voltages and you can not easily derive one from the other using a non-isolated POL, consider an asymmetric dual. Asymmetric duals are isolated, 2-output DC/DC converters that typically provide two low voltages such as 3.3V and 1.8V.  ...more

If your challenge is to power an entire mixedsignal, analog/digital, system partition from a single dc source voltage, C&D Technologies' high-quality, triple-output DC/DC converters can provide your total solution. Operating from inputs as low as 4.7V or as high as 75V, each of these full-featured power converters offers a 3.3V or 5V prima ...more