Current Generators

New rugged design to withstand industrial environment. Metal body with Collapsible steel handle. In-built hand-driven brushless AC generator and static rectifier to supply Stabilized DC voltage. Guard terminal to eliminate surface leakage current. Cross coil movement, sintered anti-friction bearings and delrin-moulded gears ensures trouble-fre ...more

The NEW Agilent U1250A series handheld digital multimeters are full featured handheld multimeters that offer maximum versatility for current and future needs. The Agilent U1252A is a 4½ digit dual display handheld multimeter featuring accuracy up to 0.025%, true RMS, temperature, capacitance and frequency measurements on top of data-logging, f ...more

A closed loop current sensor consists of a Hall generator mounted in an air gap of a magnetic core, a coil wound around the core and a current amplifier.The current carrying conductor placed through the aperture of the sensor produces a magnetic field that is proportionate to the current. ...more

The CPCI-ADDA module offers a complete solution for high performance data acquisition applications. Both the ADCs and the DACs use 10 mS converters that will support up to 100khz signals. The CPCI-ADDA supports P.I.D. loop closure frame rates of up to 4 KHz per channel. The CPCI host can download gain and setpoint changes on the fly. ...more

Hand Operated Generator. High Charging Current. Highly stable test voltage combined with high sensitivity  ...more

The Navigation Spread Spectrum Generator can be used for precise GPS M-Code interference tests with existing GPS C/A and P/Y receivers. The simulator is capable of generating all the current GPS signals simultaneously with the new modernized signals and codes ...more

GI could be used as current generators in a variety of applications, as activation and hold-on tests for switches and protection relays, primary current injection tests, precise evaluation of circuit breakers, heating tests for contacts, cablings and electric equipments.  ...more

EMC Partner Watt-hour-meter Insulation Tester is a patent pending generator designed for different tests: Insulation test on capacitive loads as insulation material, air insulation, gas insulation etc. waveform 1.2/50µs up to 12kV with a serial resistor of 40 Ohm, current limited with 40 Ohm; Insulation test on capacitive and inductive loads a ...more

Built-in RECHARGEABLE battery pack for powering LNB, 13/18 V power with LED indicator, 22 KHz signal generator for test of high band frequency, 22 KHz signal LED indicator, LNB voltage measurement up to 25 VDC, VOLTMETER, LNB current measurement up to 500 mA, AMMETER ...more

Spellman?s XLG Series of X-ray generators are well regulated high voltage power supplies with output voltages to 130kV and very low ripple achieved through the use of advanced resonant conversion techniques. Extremely stable voltage and emission current outputs result in significant performance improvements over previously available ...more

Two, 4-1/2" meters: Voltmeter, 0-18-0-36 for testing operating voltage. D.C. ammeter dual scale 10-0-100/120 amp for testing alternators and 30-300 amp for testing free running starters. One 3" D.C. ammeter 10-0-10 for testing field current. Duplicates the circuitry found in an automobile. Tests 6-12-24 volt. A or B circuit. Motor rev ...more

The CPCI-AD16 module provides a 3U high performance data acquisition subsystem. The Local DSP can be used to simply move data samples to the CPCI bus or can provide processing functions such as limit checking, FFT?s, digital filtering, etc. Application software can be downloaded to the DSP via the CPCI interface. ...more

GIS could be used as current generators in a variety of applications, as activation and hold-on tests for switches and protection relays, primary current injection tests, precise evaluation of circuit breakers, heating tests for contacts, cablings and electric equipments.  ...more

8 channel, 16 bit D/A, Wave RAM generator functions, low current versions, front panel I/O, 3U. ...more

This instrument contains three separate generators: a main generator that generates either AC Current, AC Voltage or DC Voltage; auxiliary AC Voltage generator that generates an idependent, phase shiftable AC Voltage; and an auxiliary DC Voltage generator that generates the DC Voltage that feeds the relay under test. ...more

Three-phase power/energy calibrator M-103 is generator of accurate AC three-phase voltage and current with calibrated phase shiftamong signals. It contains three voltage and three current channels, which phase shift each of them against others can be set in rango 0 to 360o. Output voltage can be set in two ranges up to 240 V and output current ...more

The ohmmeter RMO50M is designed for resistance measurement of electrical motors and generators. RMO50M generates true, filtered DC current. The test result is displayed as R=U/I. The RMO50M instrument can store up to 500 measurements. All measurements are time and date stamped. Using RMOWin-M software a test can be performed from a PC, and the ...more

The ohmmeter RMO100M is designed for resistance measurement of electrical motors and generators. RMO100M generates true, filtered DC current. The test result is displayed as R=U/I. The RMO100M instrument can store up to 500 measurements. All measurements are time and date stamped. Using RMOWin-M software a test can be performed from a PC, and t ...more

The cable selection set InterSelect is used for positive selection of a single cable or line out of a bundle of cables. For positive selection unipolar current impulses are sent into the line under test. The InterSelect impulse generator S11 is used for non-live power, signal and telecommunication cables. Alternatively or as supplement the Int ...more

Today's telecommunications and computer systems increasingly take advantage of devices such as laser and IR diodes, EEPROMS and flash memories which operate at high voltages or currents. The Agilent 8114A high power pulse generator delivers fast, clean positive or negative pulses up to 100 V at frequencies up to 15 MHz. ...more

The PMC-DA816 is a slave Digital to Analog board that is managed by the host processor on the PMC bus. The card contains a state machine that performs most of the work of outputting data, in order to minimize the impact to the HOST system. ...more

Load Dump pulses simulate the sudden disconnection (e.g. by corrosion) of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction. ...more

For exponential current impulse ECI 1/20us, 4/10us, 8/20us and lightning current impulse LCI 10/350us applications with impulse current amplitude up to 200kA. ...more

Surge pulses occur due to direct or indirect lightning strokes to an external (outdoor) circuit. This leads to currents or electromagnetic fields causing high voltage or current transients. Another source for surge pulses are switching transients originating from switching disturbances and systems faults. ...more

The FCC-TG-115A is a coaxial charge line type of pulse generator designed to generate a trapazoidal shape output pulse. It is designed primarily to drive current injection probes to inductively couple current onto cables bundles to satisfy the CS-115 test requirements of Mil Std 461/462D and Mil Std 461E. ...more