Current Generators

The Galaxy 4000 separates itself from other UPS modules with technology that increases performance and reliability, all at a competitive cost. The Galaxy 4000’s IGBT rectifier significantly minimizes input harmonics and the Power Factor Corrected Input reduces installation costs thanks to smaller cabling and generator costs. Unmatched fr ...more

The IM2000S is a high performance microstepping controller that incorporates a sine/cosine signal generator, anti-resonance circuitry, PWM current control and much more in one monolithic IC. The IM2000S combines hardware intense functions together with innovative features to provide designers with a powerful yet simple solution for their high ...more

The F125 square wave frequency generator  replaces our F150/155/105 frequency generators. It is a completely new design with many new features. The main one being that it can run standalone up to 1500 program files copied from a PC or Mac. It is also possible to connect the F125 to a computer via a USB port and control it with the F100 3.0 so ...more

PMM 1008 is a magnetic immunity test system for making tests according to IEC 1000-4-8 and EN 61000-4-8 normatives. The system is composed by a programmable current generator and an induction square coil with mast and truck. ...more

The VX2702 is a high precision, high speed DC-Source and DC-Measurement Unit (SMU). The SMU includes one U/I-Generator (DCVS/DCCS), one DC-Voltage-Measurement Unit (VMU) and one DC-Current-Measurement Unit (CMU). All units are operating completely independent. ...more

The AV-151F series of current-output function generators allow sine, square, and triangle waveforms to be generated at amplitudes to +/- 2 Amps and frequencies to 20 kHz, with a compliance voltage range of +/- 5 Volts.  ...more

The HV1000 is a state-of-the-art, high frequency, high power module designed to address numerous applications that require very fast and clean high voltage or current pulses such as driving laser diodes, instrument calibration, component testing, beam steering and gating PMTs and MCPs. ...more

The P Series uses a precision digital sinewave generator to produce a low distortion output .Dual LCD readouts clearly display programmed settings for voltage, current limit and frequency. Load current is measured using true RMS sensing and can be displayed on the front panel as well. Adjusting voltage, frequency and current limit is accomplis ...more

The new Dagan 6400Advanced is a system, which consists of six fully programmable High Voltage constant current generators for use with single or multi barrel microelectrodes. Without the need of any batteries, precise iontophoretic drug ejection is accomplished by passing controlled constant currents through the drug carrying electrodes. ...more

This 600W dynamic load offers a wide current sink capability of up to 120A. By using automatic ranging a tight resolution of just 3.2mA is possible for lower current applications. When the ELP-3356 is operated in constant current or constant power mode the internal generator enables the dynamic waveform to be adjusted. The rise and fall period ...more

The VG-871 is a standalone type multiple-interface video generator, which can test most of Flat-Panel-Display in current market. It supports the HDMI digital interfaces with the latest standard Ver.1.3a, and also supports specific functions of HDMI 1.3a such as Deep Color (max.12-bit), xxYCC and LipSync. ...more

Profile generator generates voltage / current signal output against time. The waveform / pattern to be generated is user programmable.  ...more

The VG-870 is a standalone type multiple-interface video generator, which can test most of Flat-Panel-Display in current market. It supports the HDMI digital interfaces with the latest standard Ver.1.3a, and also supports specific functions of HDMI 1.3a such as Deep Color (max.12-bit), xxYCC and LipSync. ...more

The ION-100(T) uses an extremely accurate constant current source operational amplifier with +130 compliance voltage. The current output range is selectable between +/- 200nA and +/- 2000nA. ...more

T-302 H.V. Surge Generator is mainly used to test high resistance fault and flashover fault for power cable of 3~10kV. In conjunction with the T-903 Power Cable Fault Locator and the T-505 Pinpoint Fault Locator for fault locating. Matching with the special digital micro ammeter, T-302 can also perform Current Leakage test for cable of 6kV and ...more

TG(tracking generator) function was built into the current model MSA338. It is "3.3GHz Spectrum Analyzer with TG/MSA338TG". This model enables the measurement and evaluation of the amplitude frequency characteristics such as filter, amplifier, other electric components and circuit because of a tracking generator. Of course, all functi ...more

Load Dump pulses simulate the sudden disconnection (e.g. by corrosion) of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction. The LD 200M simulates these high energy pulses having a duration time in the range of hundreds of ...more

Load Dump pulses simulate the sudden disconnection (e.g. by corrosion) of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction. ...more

Load Dump pulses simulate the sudden disconnection (e.g. by corrosion) of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction. ...more

For exponential current impulse ECI 1/20us, 4/10us, 8/20us and lightning current impulse LCI 10/350us applications with impulse current amplitude up to 200kA. ...more

The MT185 performs basic tests, like line loss, noise, and level measurements. It also features a balanced tone generator, C-message weighting filter, termination mode and bridge mode. The unit is equipped with DMM functions like voltage, current, and resistance measurements. ...more

The ITC57600 Tester is a programmable current waveform generator that is used to surge, test and measure voltage breakdown on many different device types. These include Transient Voltage Suppressor (TVS) diodes, as well as MOSFET and BIPOLAR Transistors, Zeners, Rectifiers, MOVs, Polyswitches and PTC devices.  ...more

Clear identification of a cable before it is cut or fi tted is a task with absolute relevance to safety. Any mistakes here can have fatal consequences for the cable fi tter and cause outages for the connected customers. The CI cable identifi cation system has been designed for even simpler, safer working. The system consists of the current puls ...more

Performs DC parametrics and functional tests. 10MHz pattern generator. Characterize flash memory cell current and MRAM magnetoresistive properties. Algorithmic Pattern Generator Packaged devices or wafer test. ...more

The FCC-TG-115A is a coaxial charge line type of pulse generator designed to generate a trapazoidal shape output pulse. It is designed primarily to drive current injection probes to inductively couple current onto cables bundles to satisfy the CS-115 test requirements of Mil Std 461/462D and Mil Std 461E. ...more