Counter Timers

This remarkable instrument combines the high accuracy of a top performance counter and a wide-band DVM with a visual waveform display. The multi parameter display shows up to ten different signal parameters simultaneously. The 50 MHz waveform display gives a precise picture of your input signal trigger conditions. ...more

The Fluke PM 6690 timer-counter-analyzer is the most versatile and accurate tool for measuring time, frequency, or phase. On top of that, the PM 6690 has built-in analysis capabilities that give you the dynamics and the statistical behavior of the parameter under test. ...more

With its revolutionary technology, the PM 6681 from Fluke sets the standard for measurement of time intervals, frequency, phase and jitter. PM 6681 is much more than just a timer/counter. Its speed and resolution are comparable to the most accurate time and frequency modulation domain analyzers. ...more

The PX455S is A universal counter/timer module with two (2) measurement channels. Its frequency range is up to 250MHz. Extensive input signal conditioning control is available and the normal complements of measurement functions are included. This unit also features a position for adding one single-wide M-Module. ...more

NIM Quad Scaler and Preset Counter / Timer. NIM/TTL inputs; 4 8-digit up-counters with LEDs; up to 24-digit counting depth; 1 7-digit down-counter/timer; frequency measurements; up to 250 MHz counting rate ...more

CAMAC Ethernet Crate Controller. Full CAMAC bus control with LAM detection; full control via embedded dynamic web server; available NIM I/O functions: outputs, inputs, event counters, pulse generators and trigger/busy modules; default I/O settings recallable with a dedicated pushbutton; ANSI C remote control library, with extensions for local ...more

It is a simple radiation measurement instrument with high proofing sensi- bility for x-, alfa, beta and gamma rays. Digital display, indication of impulses by red LED and acoustic signalization facilitate the radioacti- vity measurement and verification. Other advantages are the specifica- tion of the measurement time (Timer) and the support of ...more

The ATC-optoOUT module provides 16 digital Output lines with three 16 bit counter/timer an 4 general purpose interruptible lines. Isolation is provided via Optical Isolators with 100mA drive capability. ...more

The ADAM 4080 has two 32-bit counter channels and a programmable timer for frequency measurement. A digital alarm function lets you download 32-bit alarm values to the module from the host computer. A programmable digital filter rejects noise on the input signal for more stable output readings. The ADAM 4080D has a 5-digit LED display for chan ...more

The CPCI-MFIO-6U is a 6U CompactPCI multifunction I/O board. The CPCI-MFIO-6U offers 32 channels of 16 bit A/D, four 16 bit D/A, 16 digital I/O, counter / timers, and one PMC expansion slot for additional I/O. There is a local 60 Mhz TMS320C31 DSP processor to supervise all the I/O activity. The DSP can be programmed by the end user to execute ...more

The ATC-optoIN module provides 16 digital input lines with three 16 bit counter/timer an 4 general purpose interruptible lines. Isolation is provided via Optical Isolators with a range of input voltage options, 5, 12, 24 or 48 volts. ...more

The CPCI-AD32 is a 3U CompactPCI multi-function I/O board. The CPCI-AD32 offers 32 channels of 16 bit A/D, two 16 bit D/A, 16 digital I/O, counter / timers. There is a local 60 Mhz TMS320C31 DSP processor to supervise all the I/O activity. ...more

Model AD8-16 (alternate part number ADA-8) is an economical, multiplexed, eight-bit Analog-to-Digital Converter (A/D) and Counter-Timer card for ISA-bus computers. It accepts up to eight differential or 16 single-ended analog inputs (jumper configured). AD8-16 requires a full-size expansion slot. ...more

The ProDAQ 3808 Counter Timer Function Card is an enhanced version of the ProDAQ 3806 Counter Timer Function Card. The ProDAQ 3808 Counter Timer Function Card is designed to operate in one of three modes: pulse counter, frequency meter or time interval counter.  ...more

The ProDAQ 3806 Counter Timer Function Card is one of the ProDAQ high density cards, which can be fitted into ProDAQ Motherboards. ProDAQ modules are the most versatile VXIbus modules in the market. They provide the user with the highest channel density and functionality available today.  ...more

The CTR-05 is a low-cost half-size card that contains five general purpose 16-bit counters, a crystal-controlled timebase with dividers, and two 8-bit parallel digital I/O ports. The card plugs into I/O slots in ISA-bus computers. CTR-05 contains the highly flexible type 9513 LSI counter chip ...more

Our CYCTM 20HU board includes four counter-timer chipsets, each with five 16-bit independent up/down counters. Up to five counters can be chained together with software to provide a 32-, 48-, 64-, or 80-bit counter. This board is ideal for event counting, pulse and frequency measurements, watchdog timing, alarm comparisons, and other input fun ...more

The ATC-CIO32 module provides 32 parallel I/O lines withsix 16 bit counter/timer an 8 general purpose interruptiblelines. Each Z8536 controller provides two general-purpose8-bit ports, one special-purpose 4-bit port, and three 16-bitcounter/timers. The ATC-CIO32 module is based on the Z8536 from Zilog. This device offers many capabilities for ...more

NLS panel mount digital counters, frequency meters, and interval timers are available in four case sizes and feature a wide range of functions. These versatile, rugged, and low cost meters find many applications. Features in various meters include highly accurate crystal time base circuitry, counts of up to one million per second, frequencies to ...more

NLS panel mount digital counters, frequency meters, and interval timers are available in four case sizes and feature a wide range of functions. These versatile, rugged, and low cost meters find many applications. Features in various meters include highly accurate crystal time base circuitry, counts of up to one million per second, frequencies to ...more

Laureate 4-20 mA output transmitters are housed in a DIN rail case that is only 22.5 mm (0.89") thick. Signal connections are via detachable screw terminal connectors. The transmitters duplicate the performance and extensive programmable features of their Laureate digital panel meter, counter and timer counterparts. Features include excep ...more

The VX2210 is a high precision, 9 digits, 100MHz Timer Counter for high performance measurements. The two input channels (A and B) can be used independently and providing capabilities needed for electronic test applications. Counter functions include frequency, period, pulse width, time interval, rise and fall time and totalize measurements. A ...more

The PCI385 Universal Timer Counter PCI card is an ideal solution for automated test and measurement applications. The PCI385 features two timer/counter inputs. Both inputs have a coaxial connector for the input range of +/- 10 V and high-voltage pins for the input range of +/- 300 V. The coupling of the inputs is either AC or DC. The PCI385 pro ...more

USB/Ethernet DAQ device with 14 analog inputs (12- to 16-bit), 2 analog outputs (12-bit), 23 digital I/O, 2 counters, and 6 timers. 8 of the digital I/O can be configured on the fly as up to 6 timers and 2 counters. ...more

Laurel's data logging software can turn a PC connected to up to Laureate instruments into a powerful, data logging system. The Laureates can be any mix of digital panel meters, counters, timers and transmitters. The software allows 31 hardware instruments and 33 virtual instruments. The latter can display calculated parameters which combine da ...more