Showing results: 1 - 15 of 22 items found.
-
Curtiss-Wright Defense Solutions
Our CompactFlash cards are removable mass storage devices that are rugged for use in our recorder products. The recorder controls data storage to the CompactFlash card. Card data is read and erased using a standard CompactFlash card readers. For information on card initialization, recording and playback refer to the respective recorder data sheet.
-
PMCF3 -
Abaco Systems Inc
PMCF3 is a COTS IEEE 1386.1 compliant PMC with removable CompactFlash card up to 6 GB that offers a convenient way to add large capacity, non-volatile memory to rugged system solutions. Targeted at the world's defense and aerospace OEM marketplace, this cost-effective CompactFlash adapter is ideal for use with our families of COTS SBCs and PMC carrier cards.
-
CF extend 160B -
Sycard Technology
The CF extend model 160B is the ultimate CompactFlash™ extender card. It provides CompactFlash™ host and card developers a convenient way of accessing signals on the interface.
-
CF test 222 -
Sycard Technology
The CF test 222 socket tester provides a quick and easy way of verifying the operation of a CompactFlash™ host socket. Housed in a standard 3.3mm CompactFlash™ card, the CF test is fully self-contained. The CF test socket tester verifies all signals on the CompactFlash™ interface including accurate Vcc measurements.
-
CF test 220 -
Sycard Technology
The CF test 220 socket tester provides a quick and easy way of verifying the operation of a CompactFlash™ host socket. Housed in a standard 3.3mm CompactFlash™ card, the CF test is fully self-contained. The CF test socket tester verifies all signals on the CompactFlash™ interface including accurate Vcc measurements.
-
CF extend 180CIB -
Sycard Technology
For those applications that require access to a CompactFlash™ card that can't use a standard extender card, Sycard provides the CF extend 180CIB (Card Interface Board) which allows full access to all 50-signal and power pins on the CompactFlash™ peripheral. Standard 0.1" headers allow the user to connect standard 26-pin ribbon cables to test or prototype hardware.
-
CF extend 180HIB -
Sycard Technology
For those applications that require access to the CompactFlash™ interface that can't use a standard extender card, Sycard provides the CF extend 180 HIB (Host Interface Board). The CF extend 180HIB allows full access to all 50-signal and power pins on the CompactFlash™ host. Standard 0.1" headers allow the user to connect standard 26-pin ribbon cables to test or prototype hardware.
-
CF extend 180 -
Sycard Technology
The CF extend 180 is a flexible extender card designed to provide easy access to a CompactFlash™ card for debug or test. Designed with the same low noise characteristics of our CF extend 160, the CF Extend 180 takes this design a step further by connecting the host and card via ribbon cables. The flexible extender consists of two PC boards, the host interface board and the card interface board.
-
CF extend 165 -
Sycard Technology
The CF extend 165 is a unique development tool for CompactFlash™ designs. It allows a standard 68-pin PC Card to be inserted into a 50-pin CompactFlash™ socket. Developers of CompactFlash™ products can now use a standard PC Card form factor as a starting point for new designs. While the 50-pin CompactFlash™ interfaces eliminates address lines A11-A25 and the Vpp programming pins, many current PC Cards may work under those conditions.
-
CF extend 162 -
Sycard Technology
In a high volume production environment a CF test 220 socket tester may see several thousand insertion/removal cycles a month. To prevent wear and tear on the CF test 220's 50-pin connector, Sycard supplies a low-cost socket saver, the CFextend 162. The CF extend 162 is inserted between the CompactFlash™ socket and the CF test 220 unit.
-
CF extend 166 -
Sycard Technology
CompactFlash™-to-PC Card adapter is designed to allow a 68-pin PC Card to be plugged into a CompactFlash™ socket. The card is constructed with a flexible circuit to allow a the PC Card to be mounted in a number of orientations. The CFextend 166 can be used for a wide variety of applications.
-
CF extend 182 -
Sycard Technology
The CF extend 182 is a low profile flexible extender card designed to physically extend the CompactFlash™ socket for easy access. Similar to Sycard's CF extend 180, the model 182 reduces the overall dimensions of the extender by using a single piece flexible circuit board. The lower profile allows for uses in many applications where the CF extend 180 was too bulky. The CF extend 182 extends the CompactFlash socket 5".
-
cPCI-R6100 Series -
ADLINK Technology Inc.
*Intel® Ethernet Controller I350-AM2*Up to four Ethernet GbE ports*Dual display, DVI and VGA*CompactFlash and SD card slots for onboard storage
-
ETB9F000 -
Axiomtek Co., Ltd.
The ETB9F000 has four PCI slots and three ISA bus expansions as well as CompactFlash™ Type II socket. Most I/O functions have been integrated into this baseboard.
-
927x -
ELMA Electronic, Inc.
The 927x family supports one or two rugged CompactFlash drives (CFI or CFII). MTTR is significantly reduced by using sockets that allow easy removal while clamps hold the drives in place during normal operation.
