Cable Locators

The TPT-8020A is an easy-to-use and portable test set with advanced cable locator and simple network tester in one unit. Besides identifying cable sequence, measuring the cable length, diagnosing cable faults and locating cables, the TPT-8020A can also be used to simply perform network testing. It is an unnecessary tool for cabling construction and ...more

The reliability of the daily used and proven cable test van InterCable FOF permits the fast and exact fault location, cable test and diagnosis in low, medium and high voltage networks. The conjunction of the modernest cable measuring methods enables a precise localization and characterization of cable faults. ...more

The cable selection set InterSelect is used for positive selection of a single cable or line out of a bundle of cables. For positive selection unipolar current impulses are sent into the line under test. The InterSelect impulse generator S11 is used for non-live power, signal and telecommunication cables. Alternatively or as supplement the Int ...more

The acoustic pinpointing fault location system Kamphone is a ground sound microphone and is used for pinpointing of flashover faults in power cables. It consists of a receiver, a sensor and headphones. Three search methods are available: acoustic pin-pointing, coincidence and relative distance measurement. The display of the receiver can be used t ...more

Perfect for the homeowner or contractor looking wires and valves such as sprinklers, invisible fences, etc around homes or other shorter cable systems. Very simple to operate. Just connect the transmitter alligator clips to the wire to be tracked and the ground rod, then swing the receiver over the path of the cable. By following the audible nul ...more

The unique Pro290 Wire and Cable Locator is a new tool for contractors working with cable TV, telephone, landscape lighting, invisible fences, or general cabling. The Pro290 consists of a transmitter and receiver with enough power to track wires up to 1000ft. The Pro290 uses an easy to track 33khz frequency, a peak signal, and setups up in less t ...more

The Pro871 Cable Locator is a new low cost locator for contractors and maintenance personnel. Incorporating a dual frequency transmitter and sensitive receiver, the Pro871 tracks many types of cabling, including CATV, electrical, telephone, and lighting. The Pro871 transmits an easy to follow beep signal that is tracked by the receiver. ...more

Traces live wires buried or hidden behind walls up to 13 feet deep - Traces unenergized and open (broken) wires - Performs tests without having to interrupt power - Locates breakers, neutral and ground lines - Locates and traces wires in walls, floors, conduit, computer cables, etc. - Pinpoints shorts, ground faults and broken wires - Does not ...more

Keep productivity high and operational costs low, with the AT-3500. It’s the rugged, economical solution for locating underground energized and de-energized wires, cables and pipes. Great for parking lot and airport lighting applications, it precisely pinpoints buried services, with exceptionally fast sound and meter response. The backlight multipl ...more

An easy-to-use fault locator, cable and wire manager and tone generator. Instantly measures distance to open or any fault from one end of any cable pair. Additional line cord options available for coaxial cable (F-connectors) and other applications  ...more

The Fault Mapper Model CA7024 is a hand-held, alphanumeric, TDR (Time Domain Reflectometer) Cable Length Meter and Fault Locator, designed to measure the length of electrical and communication cables.  ...more

Cable Locator Tone-Test Set – Amplifier Probe and Tone Generator – Helps locate, identify, trace cable-pairs, ...more

Locate broken wires and shorts in telephone and data cables within 5cms. Location of cable faults is normally carried out in two phases. First a location is made from the ends of the cable using either bridge or pulse techniques. The position of the fault is usually expressed as a percentage of cable length. A search is then made in the region of ...more

Manual Tester. Resistance Range 1 mW ¸ >40W. Output voltage (with float probes) <0.5V. Output current pulse (duty cycle <10%) <100mA. Probe cables length 100cm. Functions Locator, Buzzer, Test . T27 instrument dimension 180x150x55 cm  ...more

The L1050 Portable Locator is a one-piece design that is lightweight and highly accurate. Operating the receiver at multiple frequencies optimizes performance for the specific needs of the user with accurate long or short range locates. The flexibility of the unit allows high power operation at low frequency to solve the difficult multi-point groun ...more

OptaSense product suite provides Telecom companies with the ability to both establish the precise location and path of existing buried fibre and identify when buried cables are in danger of being accidentally damaged due to mechanical digger activity. ...more

The Model 60 Long Distance Fiber Fault Locator detects fiber breaks over distances up to 50 km and longer.  The detector wand held near the cable emits a continuous tone when a fiber break or micro-bend is detected.  ...more

Single High Frequency - 83 kHz. Jumps Insulators and Gaskets. Ergonomic Receiver is Comfortable to Carry. Distance Sensitive Left/Right Guidance. Simultaneous Peak & Null Display. Real Time Continuous Gain Adjustment ...more

Peak and Null Operation ? for Precise Locating. Advanced Compression Circuitry Provides Crisp Response in Congested Areas. High Efficiency Ferrite Antenna Gets More Power on the Line. Crystal Control ? Prevents Frequency Drift and Maximizes Receiver Response ...more

The FIS Pocket Fault Locator is a rugged and lightweight, just 7.1" in length and only 4.5oz.  The universal adapter accepts any 2.5mm ferrule, allowing 650nm laser light to be injected into a fiber.  This light enables breaks or sharp bends in a cable to be identified 6-7km away on singlemode fiber, 4-5km away on multimode fiber.   ...more

The A799 is AGM Elettronica's most advanced fault locator. It can carry out a wide range of routine tests on both telephone and control cables. Tests performed include measurement of cable length,  resistance, capacitance, unbalanced resistance and unbalanced capacitance of  pairs.   ...more

The PL-960 offers a high power, high frequency locating. With 3 active frequencies, 27kHz, 83kHz, and 334kHz, The higher frequencies are good for shorter pipes. Can trace and locate any continuous metal such as iron, steel, and copper water lines, gas lines, tracer wire by plastic pipe, telephone/TV cables, copper and aluminum wire, conduit and pow ...more

Crystal Controlled Transmitter and Receiver ? Provides Operating Stability. Narrow Noise Bandwidth ? Higher Sensitivity for Improved Accuracy. Sharp Meter Response ? Improved Compression Circuit Makes Visual Identification of. Trace Objects Easier. 50/60Hz Power Line Locating Capability ? Coil Design Reduces Interference. Automatic Shut Off on ...more

Peak and Null modes providing versatility and locating accuracy. Visual and Audible line location methods. Bubble Level for accurate depth determination. Loudspeaker overrides background noise. Signalator Tone Interruption extends battery life from 200 to 500 hours. Easy to use, rugged design ensures functionality ...more

The FL-10 fault locator bridge is a tester controlled by a microprocessor dedicated to quickly and accurately locate the faults as well as to test the quality of telecommunication cables. ...more