|Sponsor Your Products|
AG-T104 - CCTV Tester 2.8 inch LCD color monitor 2.8 inch LCD color monitor ● OSD menu operation ● Video signal testing ● Audio signal testing ● PTZ controlling ● UTP cable testing ● Video signal generating ● RS485 data testing
AG-T106 - CCTV Tester 3.5 inch LCD color monitor ● OSD menu operation ● Video signal testing ● Audio signal testing ● PTZ controlling ● UTP cable testing
AG-T108 - 3CCTV Tester 3.5 inch LCD color monitor 3.5 inch LCD color monitor ● OSD menu operation ● Built-in multi-meters ● Video signal testing ● Audio signal testing ● PTZ controlling ● UTP cable testing ● Video signal generating ● RS485 data testing ● DC12V 1A power output ● 3000mAh rechargeable batteries power supply
iTester9 - CCTV Tester iTester9 supports multi-protocol and baud rate, communication ports including RS485,RS422, as well as RS232. * iTester9 supports realtime record download and WEB online tracking function. * It is more convenient for technicians to analyze whether the protocol is correct or not, or to analyze unknown protocol.
M-CST-SKA - IP CCTV Tester 3.5 inch CCTV tester with PoE voltage testing, PoE port Led link, PoE connecting monitoring, ip camera'ping testing, ip address searching, video images could be zoomed in 1-10 times, support video snapshot, video recording and playback, screenshot, support Micro SD card for recording, built in 4G SD card. NTSC/PAL auto-selecting, video signal measurement, PTZ control, preset setting, UTP cable testing, PTZ data analyst, RS485 communication address scan, DC12V 1A power output to camera, audio input testing, night LED, lithium polymer battery, working for 11 hours
M-CST-SKQ - IP CCTV Tester IP CCTV Tester with PoE, ip camera´ping testing, ip address searching, wire tracer, visual fault detector, TDR disconnection testing and short circuit testing. 3.5 inch HVGA LCD Screen, 480 x 320 resolution. Video brightness/contrast/color saturation could be adjusted. Backlight level could be also adjusted. Video images could be zoomed in 1-10 times. Support video Snapshot and screenshot. Video recording and playback. Support Micro SD card for recording. Built in 4G Micro SD card. NTSC/PAL automatic recognition and display. Video signal measurement. Upgraded NTSC/PAL video image generator. PTZ controller. Preset setting
UTP cable testing. PTZ data analyst.
CCTV-TESTER-W - CCTV Tester with Wrist Strap The TESTER-CCTV-W CCTV Tester is a portable, hand-held display unit for CCTV installations. The unit displays NTSC/PAL video on a 2.5" LCD screen with a resolution of 480x234 and enables users to adjust the brightness and color of the video feed on the spot. With the unit secured by a wrist strap, CCTV set-ups and testing are easy and hands-free without the hassle of running between a camera and DVR located in separate areas.
SE-TE668 - Pocket CCTV Tester Pocket CCTV Tester With 2.5" LCD Monitor Multiprotocol including Pelco C with LCD Cover and Standard Mounting Screws Built-in Speaker power input DC12V and 2 Piece 3.7V 1300mAh Rechargeable Battery
M-CST-SKC - CCTV Tester with PoE, 3.5 inch HVGA LCD Screen, 480 x 320 resolution Video brightness/contrast/color saturation could be adjusted. Backlight level could be also adjusted. Video images could be zoomed in 1-10 times Support video Snapshot and screenshot Video recording and playback Support Micro SD card for recording Built in 4G Micro SD card NTSC/PAL automatic recognition and display Video signal measurement
HS-CVT8 - CCTV Tester HS-CVT8 uses the new advanced
Number-buttons which can make the PTZ controlling
operation more quickly, for preset and dome ID setup.
M-CST-SR6 - CCTV Tester The CCTV Tester M-CST-SR6 offers technicians a wide range of features to simplify CCTV camera installations. Power, focus and aim your cameras locally without a trip back to the control room. The unit´s bright screen and easy to use menu are ideal for outdoor use. A durable rubberized skin helps protect the unit from general wear. A lanyard and a hand strap are included to ease installs in locations.
2.5 CCTV Tester - 2.5" LCD monitor CCTV Tester 2.5 CCTV Tester is a 2.5" LCD monitor, PAL/NTSC are both available in this machine. * 2.5 CCTV Tester adopts LED as the back lamp. * Its LED is low consumption, low interference. * It adopts the IC to realize power management, and with the feature of stabling the current of back lamp.
M-CST-SR2 - CCTV Tester This device allows the installer to control PTZ cameras that accept data over RS232, RS422 simplex or RS485 ports. The Address Search feature can be used to run a search and determine a PTZ unit´s address. The UTP cable test feature checks for connectivity across all 8 wires and also displays the pin-to-pin connections of the RJ45 connectors.
TESTER-CCTV-P - Professional CCTV Tester and Multimeter The TESTER-CCTV-P Professional CCTV Tester and Multimeter is a portable, multi-function tester for CCTV installations and maintenance. With the ability to display video on a 3.5" TFT-LCD 960x240 screen and supply 12V DC power, cameras can be set up without the hassle of running between a camera and a DVR located in a separate area. The unit offers a wide selection of test options, including digital multimeter, audio, video, and LAN (local area network) cable connections. It also provides PTZ (Pan-Tilt-Zoom) control and supports more than twenty PTZ protocols, such as PELCO-D/P, Panasonic, and Samsung.
The TESTER-CCTV-P automatically adapts to the video input signal needed when used as a monitor. It can generate the PAL/NTSC multi-system color bar for video testing and calibration. The digital multimeter provides voltage, current, resistance, capacitance, continuity, and diode testing, expanding its use beyond CCTV configurations. The unit supports RS232, RS485 and RS422 interfaces, and baud rates ranging from 150 to 19200 bps. Capable of capturing and displaying RS485 control data, the unit enables effective troubleshooting.
ANA-GCB002E - CCTV Tester 3.5-inch TFT-LCD screen Video testing Audio input testing UPT cable testing 12V DC, 0.4A power output Signal mode: NTSC/PAL Display: 3.5-inch TFT color LCD Image resolution: 640 x 480 pixels Video input x 1 (BNC connector) Audio input x 1 channel audio input DC power output x 1 maximum electric currency 400mA Battery specification: built-in rechargeable lithium battery, 3.7V, 2,000mA/h Power input: 5V DC at 1.0A Light instruction: 2 LED indicator, power indicator (green)/charging indicator (red)
SC-TI06 - CCTV IP Tester 3.5" TFT-LCD Monitor 480(H)×320(V)Resolution IP Camera's Ping Testing, IP Address Scan DC12V,1A Power Output For Camera 1Ch BNC Input & 1Ch BNC Output,1CH Audio Input Support video snapshot Video recording and playback,screenshot support micro SD card forstorage
TWD-T004 - CCTV Tester It is with composite video signal generator, show the condition of cable connected.
STest-896 - CCTV tester Ten-One CCTV security tester Combine the video test, Optical Power Meter , PTZ controller, video signal level test, NTSC/PAL color pattern generator, UTP cable test, PTZ protocol analysis, PTZ address scan, DC12 1A output, Audio test to one body.
HS-CVT13 - CCTV Tester Optical Power Meter Optical Power Meter and Digital Multimeter,3.5"TFT-LCD , 960(H)×240(V) resolution.DC12V 1A power output for camera,Video Generating, The PAL/NTSC multi-system colorbar video generator (seven-system switchable, transmit/receive seven-system colorful imagines).Data analyst. Captures and analyzes RS485 controlling data to help the technician to find out the problem.
HS-CVT - CCTV Tester Video test
UTP cable test
RS485 data test
Video signal generating
M-CST-SKG - CCTV Tester with PoE 3.5 inch HVGA LCD Screen, 480 x 320 resolution Video brightness/contrast/color saturation could be adjusted. Backlight level could be also adjusted. Video images could be zoomed in 1-10 times Support video Snapshot and screenshot Video recording and playback Support Micro SD card for recording Built in 4G Micro SD card NTSC/PAL automatic recognition and display Video signal measurement
AN-TM035A - Portable CCTV tester with 3.5-inch TFT LCD Screen With 3.5-inch TFT LCD screen (960 x 240 pixels resolution) and PTZ controller Output power for camera: 12V DC/1A With 1-channel BNC input and 1CH output With 1-channel audio input Supports RS232, RS422 simplex and RS485.UTP cable testing
GAO101 - Handheld Multi-Function CCTV Tester The handheld multi-functional CCTV tester is an ideal device for installers and field technicians to test video, PTZ function, and status of UTP cables conveniently and efficiently.
AG-T102 - CCTV Tester OSD menu operation. Video signal testing. PTZ controlling. UTP cable testing. Video signal generating. RS485 data testing.
Results 1 - 24 of 69
- Cable Testers (34)
- Cameras (34)
- Cards (18)
- Control (14)
- Controllers (10)
- Digital Multimeters (8)
- Generators (11)
- Meters (10)
- Monitoring (6)
- Monitors (21)
- Multimeters (16)
- Optical Power Meters (6)
- PAL Generators (9)
- Power Testers (9)
- RS-232 (9)
- Signal Generators (9)
- Signal Meters (6)
- TDR (9)
- Testing (27)
- Video Signal Generators (10)
- »See all 59 Categories