Bus Analyzers

MIL-STD-1553 A, B, & McAir MULTI PROTOCOLS Simulator/Analyzer/Tester type 2 PCMCIA BUS Interface Card - The PC401 can be used for Validation Testing, ProductionTesting, full bus simulation and monitoring, as a generalpurpose 1553 interface or a stand alone bus Analyzer. Forprecise message scheduling and measurements, the Majorand minor fra ...more

MIL-STD-1553 A, B & McAir MULTI PROTOCOLS Simulator / Analyzer / Tester CPCI BUS Interface Card - The CPCI301 can be used for Validation Testing, Production Testing, full bus simulation and monitoring, as a general purpose 1553 interface or a stand alone bus Analyzer. For precise message scheduling and measurements, the Major and minor fra ...more

he USB429 interface enables users to leverage existing USB 2.0 - equipped notebook computers or interface to our RSU II touch-screen Ruggedized Service Unit for the ultimate in convenience. But that’s just the beginning; by adding software modules, you can accomplish a variety of other ARINC 429 based analysis tasks, including ARINC 615 Data Loadin ...more

IP-Debug-Bus is a specialized extender card which is optimized for testing IP Modules. The bus signals are all accessible via test points. The testpoints include multiple ground locations and .025 sq. posts for ease of connection to your logic analyzer or scope. The testpoints are labeled for easy identification. Power is controlled with an on ...more

Simulate the Bus Controller, up to 32 RTs, and monitor, record, and export bus activity. Enter and display data in engineering units and save data definitions to the database. CoPilot 1553 Plus features include virtual instruments, strip charts, moving map displays, hardware and software playback modes, and scripting. ...more

The AX-1553 module is a rugged, reliable, full featured, Compact PCI module designed to provide a stand-alone, MIL-STD-1553A/B interface for avionics applications. Up to four independent dual redundant MIL-STD-1553 databus streams are supported on the 3U AX-1553 module. ...more

DapTechnology offers a series of IEEE1394 data analyzers which have proven their capabilities in several areas of 1394 testing. Focusing primarily on Link, Transaction and Protocol layer analysis all FireSpys feature a suite of analysis and testing functions unmatched in the industry! ...more

Universal Serial Bus (USB) protocol is very complex. So the USB support software present in Microsoft® Windows® operating system family is also complex and provides a layered architecture where the system-supplied and vendor-supplied user- and kernel-mode components can be involved in communications over USB. ...more

The MCA-3 Series is a family of PC-based, software controlled PCI-bus Multichannel Analyzers. The design is capable of converting incoming signals at up-to 1,000,000 events/s. ...more

IP-Debug-Bus is a specialized extender card which is optimized for testing IP Modules. The bus signals are all accessible via test points. The testpoints include multiple ground locations and .025 sq. posts for ease of connection to your logic analyzer or scope. The testpoints are labeled for easy identification ...more

Developers working with the I2C Bus, SMBus, or Smart Battery Systems no longer need to guess at bus traffic. In addition to seeing your Smart Battery messages in engineering units, this package allows you to see your data in ASCII or Hex, with options to control the display of Start, Stop, Read/Write, or Acknowledge events. ...more

The APX1553-1/2 is a member of AIM’s new (fourth generation) family of advanced PCI-X bus modules for analysing, simulating, monitoring and testing MIL-STD-1553A/B databuses. The APX1553 modules concurrently act as the Bus Controller, Multiple Remote Terminals (31) and Chronological Bus Monitor / Mailbox Monitor. ...more

The Handyscope is a bus signal measuring instrument that can be used for PROFIBUS DP and PA measurements: signal amplitude, noise, peeks, DC voltage, etc. This instrument consists out of four parts: Multi meter, Oscilloscope, Spectrum analyzer, Transient recorder and an Arbitrary Waveform Generator.  ...more

One of the main applications of VXI-LARS module is simultaneous control of parallel interfaces and buses, which requires simultaneous estimation of logical signals at great amount of lines (48 channels per one VXI-LARS module). ...more

The PMC850 analyzer provides a multitude of functions to help you analyze your system. - Capturing bus activity using sequential triggers and filters - Exerciser to perform memory, I\O and configuration cycles - Stimulus generation for hardware simulation - Target memory with addressable windows - Anomaly detection of protocol and t ...more

The Beagle™ USB Protocol Analyzer is a non-intrusive Full/Low-Speed USB protocol analyzer. Developers can see what is happening on the USB bus as it happens with bit-level timing information at 21 ns resolution. ...more

The SPI bus analyzer is a universal and powerful tool that records and analyzes data transmitted on a SPI bus. The SPIMaid is capable to record serialized data stream on the MISO and MOSI line of the bus under investigation, saving each message with its associated chip select line and time stamp. The SPI bus analyzer software displays the recorded ...more

100 MHz Digital storage oscilloscope of the latest generation with 16 CH logic analyzer and 7,8�- TFT- color display, high resolution, backlight and USB function benefits faster and larger data communication. The current electronic products become more complicated as the number of digital circuits and universal serial bus increase; the ...more

The EB tresos Inspector software was specially designed to accomodate the measuring and analysis needs of FlexRay developers. The tool can be utilized for both FlexRay and CAN, and provides a seamless integration of the two bus systems The measured data are normally analysed in frame and signal analysis windows. ...more

Silicon Control introduces the ultimate analyzer and exerciser for PC/104 and PC/104+ systems. This 3rd generation PC/104 analyzer combines high performance hardware with a sophisticated and intuitive software interface. The result is a powerful diagnostic tool for bus analysis all on a single plug-in card. ...more

Silicon Control introduces an economical analyzer and exerciser for VME systems. This 4th generation VME analyzer combines high performance hardware with a sophisticated and intuitive software interface. The result is a powerful diagnostic tool for bus analysis all on a single plug-in card. The VME650 Analyzer / Exerciser supports the latest V ...more

All the Analyzer’s operating modes are based on a physical analyzer module. An analyzer module can record CPU's address, data and control bus, external AUX lines and time stamps synchronous to the CPU's execution. Beside, it can run asynchronously as logic analyzer recording extended range of external signals. ...more

Timing Analysis and resource usage optimization for in-vehicle networks. Worst-case response times / jitters on CAN with and without frame offsets. NETCAR-Analyzer implements a set of proprietary optimization algorithms that typically enable doubling the bus load on Controller Area Network (CAN), which may defer the need for additional CAN networks ...more

The Model 686B Vibration Analyzer is designed to accommodate the vibration testing and balancing of the engines presently being used in the military and commercial aircraft. It operates with a host computer via the RS232 or UDP/I{ Ethernet Bus. Thesalient features are six data channels (acceleration or velocity input) and three tachometer chann ...more

The PA Probe is a small but high-tech extension for the ProfiTrace analyzer that makes it possible to do measurements directly on the PA bus. With the PA Probe, you can use ProfiTrace on DP as well as PA networks and finally cover all installations with 1 tool.  ...more