Broadband Test

The NPRT 2200 performs Noise Power Ratio measurements to determine the dynamic range of optical transmitters, amplifiers and other active devices used in HFC networks. It has an internal broadband noise source, selectable filters and a measuring receiver. ...more

Tollgrade?s N(x)Test is a next-generation modular, standalone (switch independent) subscriber loop measurement unit utilizing an open architecture, standardized interfaces and DSP measurement technology. ...more

NRT offers spools of High-PMD DSF for broadband test bed emulation of PMD.  This fiber was ?saved from the dumpster? so that our customers can have access to 'bad' fiber with very high mean DGD coefficient.  This fiber has all of the statistical variations of in-ground high-PMD fiber for demonstration and experimentation. ...more

The OFL 200 OTDR sets new standards for size, weight, ease-of-use, and value in a telco/broadband OTDR. Smaller than many optical loss test sets, the OFL 200 has the range, features, and price to make it the perfect OTDR for outside plant crews installing and maintaining optical fiber cables in broadband, metro, access, and FTTH networks. ...more

The OPM5 optical power meter measures optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM5 also measures insertion loss of multimode or single-mode cables. The OPM5 offers Wave ID, multiple test Tone detection, and stores optical references for each calibrated wavelength and up t ...more

The OLTS 5 Optical Loss Test Set series offers end-to-end single-mode testing at either 1310/1550 nm (OLTS 5-3 model) or 1550/1625 nm (OLTS 5-5 model). ...more

The TURBOTEST 500B Series offers the latest technology in a single fiber bi-directional loss and return loss testing. ...more

-VIDEO tester -DIGITAL multimedia -PTZ controller -UTP cable tester. ...more

Lionbridge has perfected technology that provides our clients with a highly accurate analysis of Internet and Broadband services. These tests reflect what real organizations do, namely dialing up providers and accessing Websites.  ...more

The DigiTest EDGE form factor and functionality is precisely aimed to test at the network edge and lower-density locations. DigiTest EDGE is the ideal solution for co-location sites, remote terminals and small, next-generation central offices delivering diverse broadband services.  ...more

The OPM4 optical power meter measures optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM4 also measures insertion loss of multimode or single-mode cables. The OPM4 offers Wave ID, multiple test Tone detection, and stores optical references for each calibrated wavelength. ...more

The AMX-Series is a family of high performance, AC Power Sources using linear technology to achieve superior, broadband output performance. Applications range from simple, manually controlled frequency conversion to harmonic testing and sophisticated programmable transient testing. ...more

The CAST-110 interference generation system may either be operated in standalone mode or used as a supplement to a CAST simulator. When used alone, the system provides repeatable support for testing anti-jam performance of GPS receivers. It enables the user to specify jamming levels and signal transmission characteristics for both broadband an ...more

TRaC-KTL has offered DSL interop (interoperability) testing services since 1997 when the first regulatory DSL standards were introduced. The service offering has expanded from basic regulatory testing to full DSL interop testing (including TR-067 and TR-100), network consultancy and training, and TRaC-KTL DSL services are now renowned throughout th ...more

CIRC-FB series full band waveguide junction circulators are available from 8.2 to 40 GHz frequency range in 5 waveguide bands. The circulators feature low insertion loss and high isolation for full waveguide bands operation. With H-plane junction configuration, the circulators offer unique full band operation features. These devices are ideall ...more

11XLP12 extreme low power detector is best suitable for low power im both the µW and mW regimes with very low thermal drift. Featuring broadband flat spectral response, minimal thermal drift and a noise equivalent power as low as 1 µW the 11XLP12 is ideally suited for measuring any pulsed or CW low power laser. 11XLP12 is compatible with 11UNO and ...more

Ixia's IxAccess test suite provides an easy-to-use tool for comprehensive performance and scalability analysis of edge aggregation devices. By emulating PPPoX client sessions, L2TPv2 and L2TPv3 tunnels, and running data traffic over them, the testing of devices such as Broadband Remote Access Servers (B-RAS), DSLAMs and edge routers is substan ...more

DigiTest HUB delivers a comprehensive testing solution as connection-based networks converge to more homogeneous, connectionless, packet-based networks. Throughout this transition, service providers will be faced with the increasingly complex challenge of maintaining multiple networks and troubleshooting problems distributed over multiple acce ...more

Ixia's ATM Load Module enables high performance testing of routers and broadband aggregation devices such as Broadband Remote Access Server (BRAS) systems and DSLAMs. With full wire-speed IP packet generation and analysis at OC-12 and OC-3 rates, the dual-port ATM Load Module provides a cost-effective, space efficient, multi-port test environm ...more

The 458-RT Ring Trip Interference/AWGN Generator simulates the interference from voltage transients caused by on/off hook, ringing and Ring-Trip events. Includes a controllable Ring-Trip phase and a built-in AWGN generator capable of producing independent noise on both (or either) of the CPE or CO sides. The 458-RT is used in conjunction with ...more

FEATURES: Accepts 1 to 16 Line Modules; User-Friendly Interface; Multiple Configurations; Field-Upgradeable Software; One-Year Warranty/Calibration. The 458 Series 16-slot Chassis, which consists of the 458-CC chassis and one of three control modules, provides a wide variety of configurations through use of up to 16 plug-in Line Modules. ...more

The Active H-Field Measurement Antenna HM525 is a loop antenna. The voltage at its output is proportional to the amplitude of the alternating magnetic field applied. For overview measurements, the antenna can be operated in broadband mode in the total frequency range from 100 Hz to 30 MHz. To obtain maximum sensitivity, the antenna can be loca ...more

These systems can measure a wide variety of photovoltaic devices, including p-n junction and dye-nanocrystalline solar cells (DSSCs). All systems include a light source, monochromator, filters, and reflective optics provide monochromatic light to a photovoltaic device while a broadband bias light illuminates the test device to simulate end-use cond ...more

FEATURES: Simulates TP100 as specified in ETSI TS 101 270-1 & G.992.5 Annex M; Bandwidth DC to 30 MHz; Ideal for testing ADSL, ADSL2, ADSL2+, VDSL2 chips/modems/DSLAMs; Loop lengths programmable from 0 to 9,000 m in 10-m increments; Plugs into our 458 Series (16-Slot) or 458-3SLx (3-Slot) chassis; Loop Lengths and AWGN levels can be controlled manu ...more

Simulates 0.4 mm PE as specified in ETSI TS 101 388 Bandwidth up to 30 MHz Ideal for testing ADSL, ADSL2+, VDSL, VDSL2 modems/DSLAMs 8 channels per line module; Loop lengths programmable from 0 to 4,500 m in 300-m increments; Plugs into our 458-CC-16/458-CM (16-Slot) or 458-3SLx (3-Slot) chassis; Channel-to-Channel isolation up to 90 dB; One-Yea ...more