|Sponsor Your Products|
DLT4836 - TC Dual voltage Battery Discharge Tester Dual voltage 36V 75A, 48V 56A, constant current, temperature adjusted results.
BD 12-48P - 48V / 200 Amp Load For Battery Discharge Testing and Power Supply Testing This particular Electronic Load has been designed to operate with 48V and 50V, (24 or 25 cells at 2V each), battery systems and is extremely cost effective.
LIN2412-50 - 12V or 24V, 10A to 50A Adjustable Battery Discharge Tester 12V or 24V, 10A to 50A Adjustable in 1 Amp increments, constant current, 2 line LCD display.
LT480-TC - 48V, 56A Constant Current Battery Discharge Tester 48V, 56A, constant current, temperature adjusted results.
LT360-LC - 36V, 75A Battery Discharge Tester The LT360 battery discharge tester has been designed to provide the operator with accurate battery discharge testing and ease of operation
SAT-ALU600 - UPS Battery Discharge Tester Testing UPS battery pack (16-40 section cells) and lead-acid battery pack with 12V cell. Online Monitoring, check discharge.
9200 Series - HIGH-POWER BATTERY CHARGE/DISCHARGE TEST SYSTEM 12 to 144kW with either 120 or 600 V Power Modules Fast voltage, current and mode transition times Digital measurement system with hi-res waveform capture and digital chart recorder Custom waveform/profile generation Multiple safety features to protect battery Touch-panel manual interface Customer's own or NHR Enerchron™ Test Executives
6044 - Automated Battery Testing Unit Uses no dirty, maintenance-prone carbon piles. Just enter the discharge current, press the “start” button and the 6044 will perform the BCI battery test automatically giving the most accurate means of testing a battery. Testing for the alternator and starter has also been automated, simplifying the use of this very versatile electrical tester.
GOLD-IBT - 12V Battery Tester Fast, accurate and easy to use, the GOLD-IBT is the only award winning battery tester on the market. Simulates a 20 hour battery discharge test in just six seconds. Identifies batteries that need recharging or replacing. Automatically displays ambient temperature, DC voltage and Ampere-hour battery capacity available
EVT Series - Electric Vehicle Battery Tester The Electric Vehicle Battery Tester (EVT) is designed for testing traction batteries in electric vehicles or HEV batteries in hybrid electric vehicles. The EVT realizes the functions charge and discharge with freely programmable set values for current, voltage, power or resistance in test programs, as well as the registration of the corresponding measured data.
KPG 25kV - High Voltage Tester / Cable Tester The KPG 25kV is a universal High Voltage Test Device. It is extremely robust, but also lightweight, compact and easily portable. Thanks to an internal rechargeable battery the KPG 25kV enables mains-independent testing. Capacitive loads, such as shielded power cables, will be properly and automatically discharged in case of an error or at the end of testing time by the integrated discharge device. Key switch, switch-on interlock and a protective ground circuit ensure maximum safety.
BT-3006 - HEAVY DUTY BATTERY LOAD TESTER Designed to test Heavy Duty 6,12 and 24 volt batteries from passenger vehicles all the way up to trucks, tractors, earth moving, mining, aircraft, marine including deep cycle and other equipment. Provides the correct load for high rate discharge, cold cranking and amp/hour testing. Dual fan cooling for volume or production use. Accurate load current control incorporating heavy duty carbon pile load rheostat.
BT-3006F - HEAVY DUTY BATTERY LOAD TESTER Designed to test Heavy Duty 6,12 and 24 volt batteries from passenger vehicles all the way up to N200 batteries as fitted to trucks, tractors, earth moving, mining, aircraft, marine including deep cycle and other equipment. Provides the correct load for high rate discharge, cold cranking and amp/hour testing. Dual fan cooling for volume or production use. Accurate load current control incorporating heavy duty carbon pile load rheostat.
FDT220/110 - Multifunctional Tester for Substation The tester can test characteristics of DC power supply device, such as voltage/current stability accuracy, ripper coefficient and voltage/current setting error. l Serving as the load tester (discharger), tester can test capacity and discharge curve of batteries. l Tester can monitor charging process of storage battery unit, and test charge curves of the whole unit or a single battery.
AVR-2001 - Circuit Tester Complete automotive circuit tester housed in a steel case. Tests battery alternator/generator, regulator, starter and other vehicle electrical circuits. Reverse current scales allow measurement of discharge currents.
BDBT Series - Battery Module Tester The Bidirectional Battery Tester (BDBT) was developed to offer the most efficient test unit for battery modules with typical voltages from 20 to 100 VDC. Besides standard test profiles such as Cyclelife and Capacity, it is especially suited to simulate Drivecycles or similar test applications with high dynamic load changes and high dynamic transitions from charge to discharge.
SBDT-5100A - battery test SBDT-5100A Storage Battery Discharge Tester, that main functions include storage battery discharge, monitoring and capacity analysis, are necessary tools for battery maintenance and engineering acceptance.
Battery Testers Charge/discharge and test benches for aerospace batteries Charge/discharge benches for the maintenance, the certification, the training and the homologation of all industrial battery types
Battery Test Systems The Intepro's battery test systems are configurable systems designed to test the new Lithium Ion and other high power density batteries and chargers. Combining high resolution, high powered charge and discharge systems, the Intepro IBT line of battery testers link to the battery management through the bus comms and fail-safe external monitoring of key battery parameters.
Battery Pack Test Chroma has developed two software modules that integrate a DC power supply and an electronic load for battery pack testing. The Battery Charge/Discharge Testing Software programs the test sequence, loop and stop conditions. The measured voltage, current and power data is recorded in a file for future analysis. The Dynamic Current Waveform Simulation Software records to an Excel compatible file actual discharge current waveforms from the battery and instruct the electronic load to sink the same current. This is used to simulate real world applications and evaluate the battery pack in the lab.
58250-1014 - CBA IV - Computerized Battery Analyzer True constant current battery capacity test with results graphically displayed, constant power testing supported with Extended software upgrade Discharge current is software and electronically regulated using a solid state switch and fan cooled electronic load Test any type of battery; coin cell to automotive or larger. Presets for NiCad, NiMH, Lead Acid, Li Ion, Li Poly, Alkaline, Carbon Zinc, Mercury etc.
RTKH-II - Intelligent Battery Activator & Discharger Intelligent Battery Activator & Discharger(battery test) has 3 independent test methods: battery discharge, battery charge and battery activation. Focusing on the different situation of lag single battery, RTKH-II can do a discharge test to estimate the real capacity, intelligent charge the battery, and set multiple cycles included discharge and charge to activate the lag battery. RTKH-II can upload the discharge and charge testing data to PC. In the software you can analyze the quality problem of the lag battery
iQpac - Battery Analyzer / Conditioner / Charger Personal battery analyzer/conditioner/charger with programmable charge/discharge rate. Ideal for those who want to decentralize battery maintenance and analysis and place tester/conditioners at the remote locations. Services both lithium and Nickel batteries. The iQpac shows you battery capacity in mAh on the LCD so you know how your battery will perform. This tests capacity against specifications.
SBS-1110S: Battery Capacity Tester Constant Current DC Load Ban The SBS constant current load banks are an easy and affordable way to perform accurate IEEE450 (Vented Lead-Acid), IEEE1106 (Ni-Cad) and IEEE1188 (VRLA) load tests.
These units are quick and easy to set up. They display the voltage, current and Ah removed during the test. Since this is a constant current load bank, the user also does not have to constantly adjust the current during the test like many other load banks.
These load banks come standard with multiple auto-stop settings and built-in protection to ensure that the batteries are never damaged due to over discharge.
Results 1 - 24 of 47
- Discharge x
- Alternator Testers (3)
- Analysis (11)
- Analyzers (3)
- Banks (7)
- Battery Analyzers (3)
- Battery Capacity Testers (3)
- Battery Chargers (5)
- Chargers (5)
- Control (6)
- DC Load Banks (6)
- DC Power Supplies (4)
- Electronic Loads (4)
- Load Banks (6)
- Loads (19)
- Modules (8)
- Monitoring (9)
- Power Supplies (5)
- Software (9)
- Testers (26)
- Testing (18)
- »See all 84 Categories
- Alternator (3)
- Battery Charge Discharge (18)
- Current (24)
- Data (10)
- DC (12)
- Detection (3)
- Electric Vehicle (3)
- Electronics Test (5)
- Lead Acid Battery (5)
- Lithium Battery (8)
- Maintenance (8)
- Power (8)
- Power Supply Test (5)
- Standards (4)
- Temperature (6)
- Time (5)
- Vehicle (6)
- Voltage (12)
- Wireless (5)
- Wireless Test (5)
- »See All 99 Features