ATA

PC Cable Tester ATA PRO is an advanced version of the original PC Cable Tester, now supports a Serial ATA / High Speed Serialized AT Attachment. With this new addition, PC Cable Tester Pro ATA is now capable of testing almost any PC cable on the market. ...more

All-in-one tester for almost any PC cable including Serial ATA. Get quick and easy diagnosis of open wires, shorted wires, crossed wires, and miswiring - now for almost any PC cable on the market (Serial ATA, RJ45, USB,IEEE-1394 FireWire, DB9, DB25, HD15)! ...more

The Serial ATA Pod turns the Bus Doctor into a full-featured SATA protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics that are needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration post-capture filtering of ...more

A 6U VME PowerPC CPU board with flexible DDR SDRAM and flash configurations and an array of on-board peripherals, all in a single slot. Up to two Gigabit and two 10/100Mbit Ethernet ports, up to four high speed multi-protocol serial controllers (HDLC, Bisync,..) one serial ATA port, two PMC expansion slots, UARTS, timer/counter and general pur ...more

a single comprehensive diagnostic package for SCSI, iSCSI, serial attached SCSI, parallel ATA, serial ATA, Fibre Channel, FCIP, iFCP, USB and IEEE 1394 Firewire. Test, manipulate, duplicate and search storage devices and device libraries at the raw level. ...more

PacketMaker is a flexible traffic generation product for high-speed serial storage buses. This bus exerciser is a great tool for developers of devices and controllers. PacketMaker was specifically designed for the unique requirements of high-speed serial bus protocols like Serial ATA and Serial Attached SCSI, and is the first such product for ...more

CE-ATA is a new storage protocol initiated by the CE-ATA standard committee to address this new emerging market. Utilizing the proven MMC physical interface and a subset of the ATA protocol, CE-ATA is optimized for mobile power and performance; these are factors critical in mobile consumer electronic applications. ...more

A 3U CompactPCI Intel Pentium M single board computer with dual Gigabit Ethernet channels, the CL9 supports single or double slot front I/O. It can be equipped with up to 1GB of DDR SDRAM. Onboard EIDE and two serial ATA interfaces on the rear are available for mass storage. ...more

The ATA/ATAPI/UDMA Pod turns the Bus Doctor into a full-featured ATA protocol analyzer supporting both normal and small form-factor connectors. It provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration, and timing analysis of PIO, DMA and UDMA transfers with speed capability exceedin ...more

3U CompactPCI ATA-100 Interface Module with Optional Rear I/O ...more

Serial ATA is used in the hard disk drive for PC desktops as one of the interconnection technologies for mass storage applications, emerging from the legacy of Parallel ATA. The released specification 1.0 for Serial ATA allows the data transfer rate at 150MB/s and is scalable towards higher data rate.  ...more

USB, Ethernet, Parallel/Serial ATA, and PCI Express Mentor Graphics is a world leader in communication standards-based IP cores. Offering proven, worry-free IP for your next consumer, storage, or home networking design. Free up your time to create differentiating technology, not evaluating a commodity technology.  ...more

Provides comprehensive trigger, filter, display, and decode functions. Includes real-time performance monitor, statistical analysis, protocol error detection, pattern generation and integrated power connector for device testing. Front panel indications for OOB in Progress, Link Established, Speed Indicator, Errors, and Trigger. Ethernet and US ...more

The Micro-ATX LiteField Fibre Channel & SCSI Test solution allows for portable testing, debugging and development of Fibre Channel, SCSI, iSCSI, SAS, ATA or SATA storage configurations. The combi-nation of portability and high-end specs provide for a solution that can reliably travel with you, whether from office to home, building to build ...more

The ATX PowerField Fibre Channel & SCSI Test solution allows for portable testing, debugging and development of Fibre Channel, SCSI, iSCSI, SAS, ATA or SATA storage configurations. The combination of portability and high-end specs provide for a solution that can reliably travel with you, whether from office to home, building to building, o ...more

Provides comprehensive trigger, filter, display, and decode functions. Includes real-time performance monitor, statistical analysis, protocol error detection, pattern generation and integrated power connector for device testing. Front panel indications for OOB in Progress, Link Established, Speed Indicator, Errors, and Trigger. Ethernet and US ...more

The King Kesender Mini is a top-of-the-line Test and Repair tool for HDD professionals. It can recognize, analyze and repair hard drives that are not recognizable by PC. The King Kesender Mini is used very commonly in HDD recycling, in-house testing and computer leasing, where outgoing hard drives must sound and reliable. ...more

2 Port HDD Wipe, Test and Repair Tool. A multifunctional HDD Test, Wipe and Repair tool designed for the industrial professional. Random Seek (1,000 times), verify, Read-Write-Read & Compare, 1 Cycle Test, Running Test (Aging Test), Advanced Performance Analysis, Password Detection, S.M.A.R.T. Quick/Extended Test ...more

The J7000A Series instruments high crest factor output is used as a random jitter source for serial data bus applications, including PCI Express Gen I & II, Serial ATA, and Fiber Channel. The noise source is designed for the PCI-SIG total jitter (Tj) model serial data application, but can be used for any random jitter noise application. The random ...more

The Next Generation Combining the roles of data acquisition, data logging and controller, the DT800 is a robust, stand alone, high speed unit featuring 16 bit resolution, battery backed internal SRAM and ATA Flash memory card support, 12V or internal battery operation, and a powerful operating system and internal file structure. ...more

busTRACE 8.0 Now Available Capture I/O activity on local, networked, or remote Windows PCs Fully decoded Command Descriptor Block (CDB) requests Fully decoded error analysis View I/O request data structures going down and up the I/O stack Numerous tools assist you in analyzing your captured I/O activity Send any CDB to a storage device Bui ...more

TekExpress software ordered with SATA specific options provides a completely automated, simple, and efficient way to test SATA Gen1 and Gen2 hosts, devices, and cables per the requirements of the SATA-IW (Serial ATA Interoperability Working Group) as defined in accepted Methods of Implementation (MOI). ...more

BAM is an software bus analyzer that can capture, display, and analyze trace data from any peripheral bus, including SCSI, Fibre Channel, IDE, ATA, SATA, and SAS. BAM offers complete versatility as far as choice of phases that are captured and displayed, capture modes to minimize I/O impact, buffer size and capture size, and device(s) to captur ...more

SATracer 3G is LeCroy's next generation protocol analyzer that provides fast, efficient and accurate debug, test and verification of Serial ATA semiconductors, devices, and systems. The SATracer/Trainer 3G builds upon the strengths of LeCroy's original SATracer/Trainer with a mature feature set driven by real-world test challenges and extensiv ...more

The StreamStor PXI-808 is a 3U real-time recording and playback disk controller for the PXI bus. Featuring up to 200 Mbytes/Sec of sustained performance, the PXI-808 delivers reliability, security and hours of capacity for your data acquistion system utilizing the latest Serial ATA disk drives. ...more